Thread Tools
This thread is privately moderated by josephcharles, who may elect to delete unwanted replies.
Jul 18, 2011, 03:50 PM
Trader Rating: 48
SEFLI-GRUMMAN WINGNUT MEMBER
josephcharles's Avatar
Found

motors for hotliners


Hello, Looking for 1-4 motors for my Surprise's I would like to find them with light use please.A NEU 1512/1.5D,1509 1.5 6:7:1 or similar Plettenberg - Mega motor would be my best of choices being I'm familiar with these motors. Im not looking for any esc but a CC200. I have a few CC125's and a 120 sitting around that i may use if I cant come up with the 200. Would also consider brand new if price is rite. Send me some info along with price. Any top brand In-runner 3S or 5S motors that would spinn a RF 16-17 for the Hot-liner will do trick but would prefer the motors listed above.I don't know much about hackers so If you have one you want to get rid of please send me the specs so I can compare it to the Neu motors that I use. Thanks guys for all your help!!
Last edited by josephcharles; Jul 24, 2011 at 06:33 AM. Reason: ADDED THAT I NEED A IN-RUNNER!!
Sign up now
to remove ads between posts
Jul 18, 2011, 10:38 PM
Trader Rating: 17
Registered User
How about a 1512/2D/6.7/f P32 Gear Box, 6mm shaft, Finned, little use. Still have original box. Used lightly, $200.00
Last edited by Robert-CSD; Jul 18, 2011 at 10:39 PM. Reason: typo
Jul 18, 2011, 10:45 PM
Trader Rating: 248
Registered User
chip.greely's Avatar
Something like a new/unused AXI 2820/08
Jul 19, 2011, 06:32 AM
Trader Rating: 378
Don't cut the Yellow Wire
dr.E's Avatar
Hacker B50 9s w hacker 120 ESC ....275.00

Hacker F5B Carbon with hacker 120 esc........275.00
Jul 19, 2011, 09:09 AM
Trader Rating: 14
Registered User
It might help if you told us what kind of power you were thinking,like what batteries you were planning on using and what kind of performance you were shooting for.

Joe
Jul 24, 2011, 12:37 AM
Trader Rating: 42
Registered User
fly2bob's Avatar
I have a Aveox F10cs NIB.

Here's a pdf w/ info in it on it.

$159 shipped

Bob
Jul 24, 2011, 05:39 AM
Trader Rating: 48
SEFLI-GRUMMAN WINGNUT MEMBER
josephcharles's Avatar
All PM'S were replied to as they came along. Thank you guys for all your help!!
Jul 24, 2011, 06:39 AM
Trader Rating: 48
SEFLI-GRUMMAN WINGNUT MEMBER
josephcharles's Avatar
I cant find any newer specs being that guys stopped using these a few years back. I don't know when they stopped producing these but it looks like the same time S_NEU hit it big with his motors! I don't know how this would do with a RF1617 on 5S_3250mah TP pacs?? Thank you for your reply!!
Quote:
Originally Posted by fly2bob
I have a Aveox F10cs NIB.

Here's a pdf w/ info in it on it.

$159 shipped

Bob
Jul 24, 2011, 07:34 PM
Trader Rating: 42
Registered User
fly2bob's Avatar
Quote:
Originally Posted by josephcharles
I cant find any newer specs being that guys stopped using these a few years back. I don't know when they stopped producing these but it looks like the same time S_NEU hit it big with his motors! I don't know how this would do with a RF1617 on 5S_3250mah TP pacs?? Thank you for your reply!!
From what I can gather from the PDF I included, the F10cs (has a 3.7 gb) is good up to 4s, 140 amps, and 1,000 watts. But good motors like this are under rated, and I'm sure it can go to 1,200 watts with no problem. If you explore Steve's site for comp F5B sys.'s, he has setups that go beyond the rated volts, and watts, and use as low as 3s with overly squared props (example; 17 x 18). It all boils down to the pwr you can pull out of a sys for a given motor and the plane it's pulling. Ideally, this motor is for a large 80" - 100" hotliner, that needs 600 - 1,000 watts to go vertical at high speed. But I'm sure it could provide good performance for a larger glider if it was kept light. Also btw, Steve services these motors if you would ever have that need.

Bob
Last edited by fly2bob; Jul 26, 2011 at 12:12 AM. Reason: fixed a typo

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Where do you guys buy metric nylon bolts for your hotliners? argarre High Performance 5 Dec 21, 2004 07:11 AM
Preferred servo linkage for hotliners/pylon ships? argarre High Performance 2 Jul 19, 2004 05:33 PM
Cheap Hotliners recipe for disaster Synth Vendor Talk 118 Aug 21, 2003 05:18 PM
Hotliners. Why? What for? Ron D Electric Sailplanes 37 Aug 02, 2002 06:15 PM
A question for Dieter about importing hotliners... shelby Electric Sailplanes 12 May 12, 2001 11:23 AM