Thread Tools
May 11, 2012, 08:44 AM
Registered User
cody069's Avatar
Mine was the one that came with the kit..Just set the high / low Throttle setting.

Both failed, 1 after 2 flights the other lasted about 25 flights . Stock motor and prop
Sign up now
to remove ads between posts
May 11, 2012, 05:22 PM
Always looking towards the sky
Rick B's Avatar
I saved the org. ESC to put in a foamy. Still using stock more though.
May 12, 2012, 12:25 AM
Plane crasher
seedo's Avatar
Quote:
Originally Posted by charlienofun
Seedo, do you have any pictures of how you have the motor mounted? or what you had to modify to get it to fit the tower?

Thanks,

Charlie
i have no pix but if you have a dremel its easy just sand the hole and make space for the motor and after installing the motor reinforce the tower with fiberglass tape to prevent the tower from bending.

Regards
May 12, 2012, 08:28 PM
Always looking towards the sky
Rick B's Avatar

Raptor with Fatshark Predator.100mW VT


Oh yeah! You can clap now. Full Gyro, pan and tilt built in the goggles.LOL
May 13, 2012, 07:54 AM
Registered User
Alpha1actual's Avatar
Hey guys. Just finished with my build. When looking at the motor from the rear of the plane, should the motor be rotating counter-clockwise?
May 13, 2012, 10:48 AM
Always looking towards the sky
Rick B's Avatar
I looked at the picture on the box to figure out which way the prop goes on. Then i swapped my ECS wires to get it turning in the right direction. I could send you a pic later tonight.go in . Wording facing the motor.You want it to pull like it was on the front the plane, if that makes sense.
May 13, 2012, 04:15 PM
Registered User

FPV Raptor Build Log


Hi Folks,

Can anyone point me to the build instructions for the Raptor. I suppose I can figure it out but I have learned if there is an easy way that I should probably try to take it. I am concerned about the tail assembly at this point.

Many thanks

Marc
May 13, 2012, 07:27 PM
Registered User
Where are you guys getting the 2M version that has servo's an motor already?
May 13, 2012, 07:28 PM
Registered User
Also where can you order replacement parts?
May 13, 2012, 11:50 PM
Registered User
anyone try flying this thing with a go pro mounted on it?
May 14, 2012, 02:28 AM
Registered User
cody069's Avatar
Yes ..can handle a Go Pro
May 14, 2012, 05:16 AM
Registered User
Firatp's Avatar
Quote:
Originally Posted by schusterjo
Also where can you order replacement parts?
İ thing the best thing is to buy a new one for replacement. I ordered second one to HK.
May 14, 2012, 10:20 AM
Registered User
Quote:
Originally Posted by cody069
Yes ..can handle a Go Pro
Any pictures of mounting locations?
Last edited by bearpants; May 14, 2012 at 03:22 PM.
May 14, 2012, 04:04 PM
Registered User
cody069's Avatar
I mounted it on the flat part at the front .Will post a photot later
May 14, 2012, 04:22 PM
Registered User
Quote:
Originally Posted by cody069
I mounted it on the flat part at the front .Will post a photot later
Appreciate it


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion FPV Car and Other Fun FPV Projects Thread: Crash9 FPV Talk 11629 Yesterday 04:31 PM
Discussion Skywalker or Lanyu FPV Raptor? alishanmao FPV Talk 142 Feb 10, 2016 01:49 PM
Discussion New home of Trappy's "Ultimate Zephyr FPV Build" Thread timnilson Other Websites 19 Mar 21, 2011 03:58 PM
Discussion FPV WARS (Thread for FPV "B" Movies) ch1 FPV Talk 8 Sep 16, 2009 05:37 PM
Raptor - how to install thread malcolmm 3D Flying 1 Jan 15, 2005 05:29 PM