New Products Flash Sale
Thread Tools
Old Jul 14, 2011, 11:29 PM
Duane is offline
Find More Posts by Duane
Registered User
Duane's Avatar
Discussion

Need servos for Cox Extra/Nine Eagles


Belongs to a friend, he lost the big gear off the servo. It's like $70 to replace the Rx/servos. I think I can use other servos, but this is a 2s system, and it seems everything is 1s? What can I use? Anyone have a crashed one for parts, or ideas?
Sign up now
to remove ads between posts
Old Jul 15, 2011, 03:36 PM
flying-llama is offline
Find More Posts by flying-llama
Sopwith Camel's Cousin
Quote:
Originally Posted by Duane View Post
Belongs to a friend, he lost the big gear off the servo. It's like $70 to replace the Rx/servos. I think I can use other servos, but this is a 2s system, and it seems everything is 1s? What can I use? Anyone have a crashed one for parts, or ideas?
Try a google search for something like
nine eagles extra 300

some web-sites from Hong Kong (perhaps myrcmart, miracle-mart) sell parts for this.
At $70, it may be more cost effective just to buy a new plane from one of these web-sites.
Old Jul 16, 2011, 09:22 AM
Duane is offline
Find More Posts by Duane
Registered User
Duane's Avatar
Thanks for the links! I think buying a BNF replacement would be best, It seems HK has them for $59.00 I was just thinking I could buy a $7.00 servo and glue it to the side and wire it in. I just wasn't sure of the voltage difference (1s vs 2s)
Old Jul 16, 2011, 10:19 AM
RCFLYBOY1 is offline
Find More Posts by RCFLYBOY1
CERTIFIED CRASH ARTIST
RCFLYBOY1's Avatar

servos


Take a look at the HK micro system.You may be able to get one of thier servos and wire it in. Should work ok on 3.7 volts of the 1s.
Old Jul 17, 2011, 02:59 PM
Duane is offline
Find More Posts by Duane
Registered User
Duane's Avatar
Quote:
Originally Posted by RCFLYBOY1 View Post
Should work ok on 3.7 volts of the 1s.
That's the problem, these are 2s planes. I'm lost...
Old Jul 17, 2011, 04:07 PM
I R Irv is offline
Find More Posts by I R Irv
Registered User
I R Irv's Avatar
Quote:
Originally Posted by Duane View Post
That's the problem, these are 2s planes. I'm lost...
What if you put a diode in the servo + wire ?
TODD
Old Jul 17, 2011, 10:32 PM
Duane is offline
Find More Posts by Duane
Registered User
Duane's Avatar
That's an option, I'll look into that!
Old Jul 17, 2011, 10:55 PM
coriolan is online now
Find More Posts by coriolan
"Unnecessary Necessity"
coriolan's Avatar
Quote:
Originally Posted by RCFLYBOY1 View Post
Take a look at the HK micro system.You may be able to get one of thier servos and wire it in. Should work ok on 3.7 volts of the 1s.
Maybe not a good idea, there seems to be problems with them
https://www.rcgroups.com/forums/show...&postcount=168


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Nine Eagles Solo Pro 328 (Nine Eagles' answer to the Blade 120 SR?) SoloProFan Micro Helis 1758 Feb 27, 2015 05:24 PM
Question Info needed on Nine Eagles Ultra Micro Linear Servos Razors edge 29 Scratchbuilt Indoor and Micro Models 9 Jul 13, 2011 11:02 AM
Sold Nine Eagles / Cox Extra 300 (minus Tx) dhaizli Aircraft - Electric - Airplanes (FS/W) 4 May 01, 2011 08:36 PM
Discussion Cox or Nine eagles 300 extra range problems. shazamrc Scratchbuilt Indoor and Micro Models 0 Mar 15, 2011 08:27 PM
Discussion Need new servos for Nine Eagles Kestrel... MConstable Micro Helis 3 Jan 05, 2010 04:03 PM