Jan 15, 2013, 06:42 PM
TEAM HILLBILLY
rdcskkrose's Avatar
Deathslide...deathslide...deathslide...deathslide. ..

Quote:
Originally Posted by aerosheldon View Post
i flew mine with a motrolfly, that is all i use after running them. It is on a laser now after my crash.... It survived!
Sign up now
to remove ads between posts
Jan 15, 2013, 08:43 PM
No one has more fun than me
aerosheldon's Avatar
Quote:
Originally Posted by rdcskkrose View Post
Deathslide...deathslide...deathslide...deathslide. ..
I have now learned why it is called that. Do not get into a contest with your friends to do them the lowest or you may win.

But your plane may lose.
Jan 16, 2013, 03:55 AM
Registered User
he... yesterday started tobuild my edge... all goes together very nice... just.... are tail wheels still included with a kit? tailveel wire i have, but no wheel.. and now just to decide, to make my slick allaround65mg and savox 0257 for edge... orother way around? or like i usually do to save, digis on tail, analogs on wings?...


and khmm... a tip for you guys... if you use epoxy for elevator joiner, do yourself a favour and glue control horn at the same time... or you might have to cut 2 openings on tail...
Jan 16, 2013, 08:20 AM
I live my life 12oz at a time
arnav's Avatar
Quote:
Originally Posted by rimaarts View Post
he... yesterday started tobuild my edge... all goes together very nice... just.... are tail wheels still included with a kit? tailveel wire i have, but no wheel..
Yes it is provided. It is not in the hardware bag? I vaguely remember it was a challenge to find mine as well but I don't remember why (which is not very helpful I know)... Maybe it was in fact in a separate bag which took sometime to find. If all else fail the Durbo 3/4" Tailwheel (dub-75TW) worked well for me.
Jan 16, 2013, 08:45 AM
Fly Naked !
MARCOELDRAGON's Avatar
Rain rain go away I'd like to fly my Edge today!
Jan 16, 2013, 10:40 AM
I live my life 12oz at a time
arnav's Avatar
for your 48" to 51" size electric planes what size servo extensions you like to use (light, med, or heavy duty)? I have been buying/using heavy duty or med ones thinking the weight is negligible and that I rather the extension be more robust, but is that an overkill? I am curious what you have been using.... Thanks!
Jan 16, 2013, 10:59 AM
Gone Huckin'
turnerm's Avatar
Quote:
Originally Posted by arnav View Post
for your 48" to 51" size electric planes what size servo extensions you like to use (light, med, or heavy duty)? I have been buying/using heavy duty or med ones thinking the weight is negligible and that I rather the extension be more robust, but is that an overkill? I am curious what you have been using.... Thanks!
Like you I always get thet medium or heavy duty just to be safe. And I completely agree that the extra weight is immaterial.
Jan 16, 2013, 10:59 AM
3d NOOBular
3DNater's Avatar
I use medium weight ones if for no other reason than I like having stronger wires at the connection points. Equipment on 3d planes get abused so it should be more robust. JMO.
Jan 16, 2013, 11:04 AM
TEAM HILLBILLY
Eagle34's Avatar
Quote:
Originally Posted by arnav View Post
for your 48" to 51" size electric planes what size servo extensions you like to use (light, med, or heavy duty)? I have been buying/using heavy duty or med ones thinking the weight is negligible and that I rather the extension be more robust, but is that an overkill? I am curious what you have been using.... Thanks!
More dependent on the servos being used really. If I am using 65MG's then I'll use lightweight ones (32 AWG), 85MG's then I'll used medium weight ones (26AWG), and for big servos I'll use heavy duty ones (22AWG.) Also something comes into play is the length of the extention, if I need to use an extention of over 12" most of the time I'll step up a size, just for the reduction in the wires resistance.
Jan 16, 2013, 11:10 AM
3d NOOBular
3DNater's Avatar
Makes sense Eagle
Jan 16, 2013, 11:24 AM
I live my life 12oz at a time
arnav's Avatar
ok, makes sense. Do you toss them after a bad crash (even assuming they pass all your "tests" )? I don't. Is that stupid for something that would costs less than $10 for a extensions for the whole plane? For a new Plane I always buy new, but after a crash I don't generally replace them. I am curious what is your SOP... Thanks x 2.
Jan 16, 2013, 11:40 AM
Back in the hobby- ALL in!
dth7's Avatar
I can't see why you would trash extensions unless there is clear stress - servo thrown from plane, bad twists or suspected stress. But just to toss them from a crash, Du know? Do you salvage servos? I'd think same reasoning as above, if it works and didn't get hammered why not use it? Just sayin.
Jan 16, 2013, 11:44 AM
3d NOOBular
3DNater's Avatar
I don't replace stuff unless it is clearly broken.
Jan 16, 2013, 12:12 PM
Registered User
Quote:
Originally Posted by arnav View Post
Yes it is provided. It is not in the hardware bag? I vaguely remember it was a challenge to find mine as well but I don't remember why (which is not very helpful I know)... Maybe it was in fact in a separate bag which took sometime to find. If all else fail the Durbo 3/4" Tailwheel (dub-75TW) worked well for me.
yeah, well, but they all take time to get! :P so far, seing as i flew my first 42" for couple of months without tailwheel, im going to put that one on edge...
Jan 16, 2013, 01:07 PM
Registered User
wedoitall's Avatar
Quote:
Originally Posted by rimaarts View Post
he... yesterday started tobuild my edge... all goes together very nice... just.... are tail wheels still included with a kit? tailveel wire i have, but no wheel.. and now just to decide, to make my slick allaround65mg and savox 0257 for edge... orother way around? or like i usually do to save, digis on tail, analogs on wings?...


and khmm... a tip for you guys... if you use epoxy for elevator joiner, do yourself a favour and glue control horn at the same time... or you might have to cut 2 openings on tail...
i think i have an extra tail wheel, maybe i got yours haha! seriously pm me your addy if you still need one and ill mail it out to yas


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product 3DHS 41" Edge "$99 Buck Huck" Ducati Mechanic 3D Flying 17299 Mar 27, 2012 03:37 PM
Sold 3dhs 41' edge buck huck bnf JBuck Aircraft - Electric - Airplanes (FS/W) 7 Jul 02, 2011 06:58 AM
Sold 3DHS 41" EDGE - ORANGE - 99 Buck Huck 6L6Amp Aircraft - Electric - Airplanes (FS/W) 14 Aug 22, 2010 07:45 PM