3DHS 48" EDGE 540 (1.5 Buck Huck) - Page 54 - RC Groups
Thread Tools
Aug 05, 2011, 11:32 AM
What?!? I didn't do that!
gremlin's Avatar
I put the ZTW 60A running the Omega in my Edge and I'm real happy with how well it performs. No problems at all and a nice smooth throttle response.
Sign up now
to remove ads between posts
Aug 05, 2011, 12:38 PM
It's just a plane.
ZackJones's Avatar
I'm going to have to take a closer look at the ZTW line. I've never heard of them before and Quantum Hobby seems to have a great selection of sizes available.
Aug 05, 2011, 12:52 PM
Registered User
vienquach's Avatar
I am looking for some servo arms to go with the 65MGs, any place to buy other than 3DHS (closed starting today)?

Vien
Aug 05, 2011, 01:00 PM
RC Student
Trapviper's Avatar
Quote:
Originally Posted by vienquach
I am looking for some servo arms to go with the 65MGs, any place to buy other than 3DHS (closed starting today)?

Vien
Scratch that, I posted a link to the servo, not the arms. Sorry about that.
Last edited by Trapviper; Aug 05, 2011 at 01:01 PM. Reason: der da der
Aug 05, 2011, 01:02 PM
ExtremeFlight - 3DHS - Legacy
blucor basher's Avatar
Quote:
I am looking for some servo arms to go with the 65MGs, any place to buy other than 3DHS (closed starting today)?
As noted on our homepage, we recommend www.adchobbystore.com for 3DHs spare parts and 3DHS small part during our move. We have a large shipment of servo arms in transit to ADC, plus whatever they may have in stock at present.

I'll also note that my two 1.5's are Jr11x and DX7 and I'm using stock arms all around.
Aug 05, 2011, 01:03 PM
RC Student
Trapviper's Avatar
Found these? Don't know if either of them is what you're looking for.

http://shop.tomsrc.com/product_info....roducts_id=557

http://shop.tomsrc.com/product_info....oducts_id=1447
Aug 05, 2011, 01:12 PM
Registered User
vienquach's Avatar
Quote:
Originally Posted by blucor basher
I'll also note that my two 1.5's are Jr11x and DX7 and I'm using stock arms all around.
Will try that. I have an A9.

Vien
Aug 05, 2011, 01:14 PM
Registered User
vienquach's Avatar
Quote:
Originally Posted by Trapviper
Found these? Don't know if either of them is what you're looking for.

http://shop.tomsrc.com/product_info....roducts_id=557

http://shop.tomsrc.com/product_info....oducts_id=1447
They are standard size arms. I still have plenty. Thanks for the help though.
As Ben mentioned, I'll try the stock arms and crank my EndPoint to 120 - 140% (A9)
Vien
Aug 05, 2011, 01:17 PM
Registered User
ForceFedDSM's Avatar
I'm using some henge servos and the arms provided aren't long enough to get the proper throws. I have a dx8 with my endpoints turned up to 150 and still no go.

How are the dubro 930 series servo arms? Will they work for the weekend until I can get some 3dhs ones?

EDIT: they won't work. Way too thin and flimsy and they don't fit my servos anyway.
Last edited by ForceFedDSM; Aug 05, 2011 at 02:06 PM.
Aug 05, 2011, 01:54 PM
Registered User
vienquach's Avatar
What kind of amp draw do you see with the Omega 130 and 14x7 prop?

Vien
Aug 05, 2011, 02:40 PM
Registered User

Leaving the Texas Hill country of Fredricksburg for Lancaster, Pennsylvania?


Quote:
Originally Posted by blucor basher
As noted on our homepage, we recommend www.adchobbystore.com for 3DHs spare parts and 3DHS small part during our move. We have a large shipment of servo arms in transit to ADC, plus whatever they may have in stock at present.

I'll also note that my two 1.5's are Jr11x and DX7 and I'm using stock arms all around.
Leaving the Texas Hill country of Fredericksburg for Lancaster, Pennsylvania?

You will miss Texas and 365 days a year of flying without freezing, or snow, or all that other stuff that comes with the winter in the north. May not miss the 100 plus dreee summers but…

My wife is from Shelby Ohio. When we go to the farm in the summer it is just as hot and humid as it is in Houston. When we go in the winter and I watch them shovel snow, I watch the cars skate around on the ice, and I watch the old gent trying to smoke a brisket outside when the thermometer says the temp is in the teens…well notice I said “watch”.

This old man (me) ain’t got the tolerance for cold. I’m just so thankful everyone in her home town in Ohio doesn’t want to move to my town. Oh but wait, there isn't really that many there.

Good luck with the move!
Aug 05, 2011, 03:12 PM
Registered User
Boy call me slow. I knew 3DH was moving but I just figured it was to a bigger warehouse, again, in the same area. From Tx to PA, thats quite a transition. Good luck with the move Ben and crew and enjoy the fall scenery.
Steve
Aug 05, 2011, 03:15 PM
Registered User
Quote:
Originally Posted by ForceFedDSM
I'm using some henge servos and the arms provided aren't long enough to get the proper throws. I have a dx8 with my endpoints turned up to 150 and still no go.

How are the dubro 930 series servo arms? Will they work for the weekend until I can get some 3dhs ones?

EDIT: they won't work. Way too thin and flimsy and they don't fit my servos anyway.
dont forget the dx8 goes up to 120% duel rate if I remember correctly, so you can max out your end points then bump that up as well.
Aug 05, 2011, 03:49 PM
Epoxy & CA Investor
DenverJayhawk's Avatar
My wife is from Lancaster and we go back there once a year to visit her parents. Will you guys have visitors once you're all set up?
Aug 05, 2011, 04:05 PM
ExtremeFlight - 3DHS - Legacy
blucor basher's Avatar
Eventually. First we move into the initial rental space while the details are being finalized on the proper space. Once we're in the real space we should be able to have visitors.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product 3DHS 41" Edge "$99 Buck Huck" Ducati Mechanic 3D Flying 17299 Mar 27, 2012 04:37 PM
Sold 3dhs 41' edge buck huck bnf JBuck Aircraft - Electric - Airplanes (FS/W) 7 Jul 02, 2011 07:58 AM
Sold 3DHS 41" EDGE - ORANGE - 99 Buck Huck 6L6Amp Aircraft - Electric - Airplanes (FS/W) 14 Aug 22, 2010 08:45 PM