Why are the rear wheels angled inward? - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Jul 05, 2011, 09:51 PM
Cranky old fart
Balr14's Avatar

Why are the rear wheels angled inward?

I have a Traxxas Stampede and the rear wheels angle inward. I've noticed other Monster trucks with the same setup. There doesn't seem to be any adjustment, either. I assume there's a reason, but it escapes me. Can someone enlighten me?
Sign up now
to remove ads between posts
Jul 05, 2011, 10:01 PM
Registered User
Its called toe in (or toe out where the wheels point outward) -


Rear is typically fixed. On some MTs you can buy parts that change it.
Jul 05, 2011, 10:08 PM
Detroit 2-stroke junkie
1320fastback's Avatar
Toe in on the rear helps the car drive out of the corners.

If you can imagine the outside tire taking most of the load because of the body roll and suspension compression this means that the rear tire with the most grip/thrust coming out of a corner is pointing in the direction of intended travel and not thru the berm if they had no toe.

Power off the car and turn the wheel hard to the right. Now push the car into the corner like its turning and you will see how the tire is pointing the way you want to go.
Jul 06, 2011, 01:35 AM
Cranky old fart
Balr14's Avatar
Thanks, I have to remember that. I'm always getting toe-in mixed up with caster/camber.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion From a newbie, are the rear wheels on my E-Revo turned in to much? OgtheKing Electric Power Cars 10 Dec 21, 2015 03:47 PM
Discussion What are your favorite battery connectors and why? lacofdfireman Batteries and Chargers 13 Jun 29, 2011 09:32 AM
Discussion Why is the trailing edge of the wing angled on a Balsa Bandit? Tumbler Electric Ducted Fan Jet Talk 4 Mar 16, 2011 05:12 PM
Why are the rear tyres on everyones bikes nice and fat and mine are thin? tod438 Motorcycles 6 Jul 23, 2004 01:28 PM
Multi engines - why are the engines angled outwards on full size? Moogee Power Systems 11 Jul 16, 2001 09:22 AM