Project "WRAITH" - RC Groups
Thread Tools
This thread is privately moderated by nasgul, who may elect to delete unwanted replies.
Jul 05, 2011, 05:23 PM
Registered User
nasgul's Avatar
Build Log

Project "WRAITH"

This is a completely different avenue for me to take.......

a small 10" motor to motor quadcopter!

I am making the frame myself, out of alloy 15mm square tube, and sheet carbon for the center plates.
So far, so good, alloy cut and shaped, then drilled out to save weight, waiting on the carbon to arrive so i can cut it to size. The cardboard templates have been cut and the thing assembled to visualize what it will look like!

The lower plate has a 'nose' to it, as that is where i would like to place a keychain cam at some stage. The bolts i have used so far are button head m2.5x20 with nuts, in stainless.

I have the kk blackboard as the brain, gws 5030 props(2x counterclockwise, 2x clockwise),the other parts are yet to be figured out.
Sign up now
to remove ads between posts
Jul 06, 2011, 01:33 PM
Registered User
nasgul's Avatar
Ok, had a think about power and motor options. going to either be 6a esc's with 10g motors, or may go nuts and use 10a esc's with 20g motors!

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log Wraith V2 - A nearly indestructible FPV park flyer IBCrazy FPV Talk 35 Sep 12, 2015 06:21 AM
Alert Axial Wraith Unboxing and Review Video MEDiC2009 Rock Crawlers 3 Jun 03, 2011 02:57 PM
Alert RC Adventures - Unofficial Axial Wraith Running Video MEDiC2009 Rock Crawlers 0 May 29, 2011 12:47 AM
Build Log "Wraith" New EDF jet design! X-Planes Electric Ducted Fan Jet Talk 17 Apr 01, 2010 03:10 PM
Wraith F5D? Shackas High Performance 4 Oct 27, 2004 10:01 AM