Thread Tools
Jul 16, 2012, 05:21 PM
Father of Fr3aK, DLG Pilot
tom43004's Avatar
Perfect Phil. Most of mine have a more vertical loop like yours shows. I didn't do a good job of photographing it.

2.5oz... OMG.
Sign up now
to remove ads between posts
Jul 16, 2012, 05:23 PM
F3B and F3K
RetoF3X's Avatar
Phil, why such a large cutout under the wing saddle? I normally try to minimize such cut outs (for wing connectors and such) and keep the fuselage as an integral tubular structure as good as it gets..

The ballast handle is nicely shaped and I like the double functionality (handle plus lock against the canopy).

Best,
Reto
Jul 16, 2012, 06:05 PM
Registered User
Do you not use a ballast tube to keep the weight from bumping your control strings? I don't see anything like that in the pics.
Jul 16, 2012, 06:35 PM
Registered User
I don't use strings. I use pushrods in teflon tubes. Strings are for girls and tampons.

I have a large cutout in the wing saddle area so that I can lay the underwing connector flat as a five pin wide connector. It made me cringe the first time I did it but I didn't want to change my standard wiring harness connector. I've subjected my Fr3aKs to lots of abuse, including Gavin launches and it has not been a problem.
Jul 16, 2012, 07:52 PM
Registered User
Thanks guys, just what I needed.

Gary
Jul 16, 2012, 08:28 PM
Father of Fr3aK, DLG Pilot
tom43004's Avatar
I use strings primarily because I'm lazy and I run the servo output horns on the throwing peg side of the fuse. When launch forces cause the ballast to push against the fuse side, it's opposite the strings.

I guess I launch like a girl then?
Jul 20, 2012, 05:44 PM
Time for me to Fly...
Mr. Wiz's Avatar
I've gotten back in touch with the Fr3aK today. What had happened is that when I repaired the boom I had a little laminating resin on the wing saddle at the rear and I had smoothed it so well with the wrap that I didn't notice it there. It was holding the TE up a little. It flies sooo much better now. I did manage to hit an out of bounds flag with the stab and it cracked and the rudder came loose but those are easy to fix.

I also had a guy tape one of my launches last week and that was very enlightening too. I had begun to throw with too much up and I was hooking the launches too. I guess I was trying too hard. I simply relaxed a little and lowered my release trajectory and viola.... The launch went higher and with less effort. I guess we just need to remind ourselves of those things every so often.

Anyway, the Fr3aK should be good to go for the Nats.

Mike
Jul 21, 2012, 02:13 PM
Father of Fr3aK, DLG Pilot
tom43004's Avatar

Latest Project


Pictures from the shop last night. You could make a case that these look better BEFORE waxing and mold release than my old molds looked when I was pulling parts.

Skunkworks back online

I'm calling this the "Fr3aK TS" for now. With a little luck I'll have a wing from this mold set in the air for the NATs in eight days. Two piece molds mean no joiner wrap or process.
Jul 21, 2012, 02:30 PM
G_T
G_T
Registered User
Tom, those molds look really sweet!

Gerald
Jul 21, 2012, 02:35 PM
a.k.a. Matt Nelson
MattN's Avatar
Quote:
Originally Posted by tom43004
Two piece molds mean no joiner wrap or process.
Looks kickass, Tom. Is that a can of elbow grease I see on the bench in the background?
Jul 21, 2012, 02:38 PM
Father of Fr3aK, DLG Pilot
tom43004's Avatar
Quote:
Originally Posted by MattN
Looks kickass, Tom. Is that a can of elbow grease I see on the bench in the background?
Nice. Yeah, I still have to use some lube on the stem of my fuse bladders or they won't fit.

No comments from the peanut gallery, please
Jul 21, 2012, 02:54 PM
G_T
G_T
Registered User
Quote:
Originally Posted by tom43004
Nice. Yeah, I still have to use some lube on the stem of my fuse bladders or they won't fit.

No comments from the peanut gallery, please
Try a drop of liquid hand soap instead.

Gerald
Jul 21, 2012, 09:24 PM
Team Horizon Pilot :)
Sweet
Latest blog entry: cr
Jul 22, 2012, 08:08 AM
Registered User
I just coat the bladder stem with baby powder. Any kind of liquid lube is too messy and I haven't quite figured out Gerald's method yet, maybe it would work well after seeing it done once.

To apply baby powder, just put some in the palm of your hand and pull the stem through a few times. Makes the stem just as slick as a babies behind.
Jul 22, 2012, 08:16 AM
But I am learning
I_Can't_Fly's Avatar
Quote:
Originally Posted by Phil Barnes

To apply baby powder, just put some in the palm of your hand and pull the stem through a few times. Makes the stem just as slick as a babies behind.
No comment

Brian P.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Park Zone's Ultra Micro Pole Cat............ ChuckTseeker Micro Ready-to-Fly 2737 Jun 08, 2017 09:12 PM
Sold Park Zone Chargers (3) 2,3and 4 cell outflying3d Aircraft - Electric - Batteries & Chargers (FS/W) 0 Jun 30, 2011 09:35 PM
Discussion Park Zone Ultra Micro T-28 Battery Upgrade? itsme2 Electric Plane Talk 4 Jun 30, 2011 12:47 PM
Found any Park Zone micro guts kino-schmid Aircraft - Electric - Micro & Indoor Airplanes (FS/W) 2 Jun 30, 2011 12:18 PM
Discussion Does HobbyKing make anything like the Park Zone T28? lacofdfireman Electric Warbirds 2 Jun 24, 2011 07:32 AM