Shop our Airplanes Products Drone Products Sales
Oct 02, 2012, 11:17 PM
3DHS 'native'
going4speed's Avatar
What spinner are yall using? I put a 10x10 on the omega 130 tonight and the nut barely goes on. Tried a 12x6 and near the same thing. I think the spinner back plate for the spinner I have is too thick.
Sign up now
to remove ads between posts
Oct 03, 2012, 04:13 AM
Registered User
Extreme flight..Yeah, the nut goes on, but there isn`t a lot of threads left.
Oct 03, 2012, 07:16 AM
You down with EPP?
johnnyrocco123's Avatar

12 flights on mine


mine climbs on turns in a KE circle??

I have to basicaly get off the rudder on a turn. Weird, usually you need more rudder on a turn.



It's a bit different than the 62" Osiris, but it's been a while since I have flown a Balsa plane this small.
Oct 03, 2012, 09:22 AM
inverted-i-fly
3drcparts's Avatar
these work great, eliminates the need for the washer so you can fit the spinner
http://www.adchobbystore.com/ADC-Air...air_p_228.html
Oct 03, 2012, 10:14 AM
3DHS 'native'
going4speed's Avatar
Looks like the corners would dig into the prop no?
Oct 03, 2012, 01:34 PM
inverted-i-fly
3drcparts's Avatar
Quote:
Originally Posted by going4speed View Post
Looks like the corners would dig into the prop no?
no, fits good
Oct 03, 2012, 01:37 PM
3DHS 'native'
going4speed's Avatar
Ordered thanks!!
Oct 06, 2012, 06:56 PM
Registered User
Mr_McGlue's Avatar
Trying to assemble the wheels and wheel pants according to instructions. It doesn't seem to fit correctly? What am I doing wrong?

Robert
Oct 06, 2012, 07:04 PM
Team Twisted!
hone1er's Avatar
Not forcing it in like I did obviously


Naw seriously though, you have to kind of go at an angle and bend the wheel pant a bit.
Oct 06, 2012, 07:06 PM
Registered User
Mr_McGlue's Avatar
haha ok was going to do that but could just picture messing it up. Will give it a go.

I even thought I used the wrong part.
Oct 06, 2012, 07:24 PM
Registered User
Mr_McGlue's Avatar
That was the ticket thanks!

Too afraid of messing up my shiny new toy I guess.

Robert
Oct 06, 2012, 09:38 PM
Team Twisted!
hone1er's Avatar
They look nice and snug when they're on. I had a pretty good time flying the Osiris today. Working on 8 point rolls and slow rolls down the runway. I did realize that i have to save this plane for last when i'm flying a bunch of planes in one day. If i go from this plane to my 3d plane i'm all over the place when i fly my 3d plane but if i start with the 3d plane i can fly it super smooth. So this will be the plane i end the day with on most days. It is a great flyer and i love doing snap roll after snap roll with it
Oct 07, 2012, 07:10 PM
You down with EPP?
johnnyrocco123's Avatar
Any Texans interested in a 47" Osiris, with all new gear?

I'll make a deal before I post the ad....
Oct 10, 2012, 02:43 PM
¿Por Qué No?

Blue or red


How does the blue Baby 'O' look in the air? Is it hard to see? Is it that much harder to see than the red? Every one is out of the red. My red one died a horrable death from a really old deans plug contact failure. Thanks...
Oct 10, 2012, 04:07 PM
inverted-i-fly
3drcparts's Avatar
I like the blue, the yellow pops and I have no problem seeing it


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale 3DHS OSIRIS RTF, Hacker, ICE 100, Servo's. funflyr Aircraft - Electric - Airplanes (FS/W) 6 Mar 27, 2012 09:07 PM
For Sale 3DHS 62" Osiris Blue BNF bjohnson80 Aircraft - Electric - Airplanes (FS/W) 5 Mar 14, 2012 10:56 PM
Discussion 3D Hobby Shop 47" Osiris flipteg 3D Flying 12 Jul 21, 2011 08:36 PM
Discussion 3dhs 47" extra cowl dimensions needed kaker123 3D Flying 3 Jun 28, 2011 03:03 PM