3dhs 41' edge buck huck bnf
Im selling a 3D Hobby Shop 41' Edge Buck Huck. Its the silver and red version. I have flown it about twenty times. It has had a couple hard landings but nothing serious. The wings are in perfect condition and everything is straight. It flies fantastik.
This is a complete Bind and Fly. It needs nothing.
Omega 72g with prop adapter, spinner and APC 11x5.5 prop
3 x HS45 and 1 x HS 56 servos. I put a HS56 on the elevator and it works perfect.
Castle Creation Thunderbird 54amp ESC
Dimension Engineering Park BEC
HK Orange 6 channel RX with satelite.
4 x 3s1p 1550mah lipos. Two are GForce 30c and two are Rhinos 25c
All four lipos have only about five flights on them. Just about every cycle was a break in cycle flying for only four minutes and balance charging.
I would really like local pickup because im not sure how I would pack this.
Asking $180 for everything.
Yes, it is a great plane. But I normally fly helis. Thought it would be fun to get a plank after all these years. I have been flying the Huck for a few weeks and the other day I took out one of my big helis.
I think my fingers where still in plank mode and I chopped the throttle. Basically slamming the heli into the dirt. Caused about $200 in damage.
I think my brain might be a little to old to switch back and forth between planes and helis. So im just going to stick with helis.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|New Product||3DHS 41" Edge "$99 Buck Huck"||Ducati Mechanic||3D Flying||17299||Mar 27, 2012 03:37 PM|
|Idea||We Need 3DHS 41" SU, Yak or Extra $99 Buck Huck||flyracer||3D Flying||59||Aug 28, 2010 09:41 AM|
|Sold||3DHS 41" EDGE - ORANGE - 99 Buck Huck||6L6Amp||Aircraft - Electric - Airplanes (FS/W)||14||Aug 22, 2010 07:45 PM|