Thread Tools
Jun 26, 2011, 09:32 AM
Registered User
Discussion

Hobby king 1.5m cessna 182 w/ optional floats


Hey guys, I just picked up a c-182 from hobby king with the optional floats. The plane with floats and 2 2200mah batteries 4s was $209 shipped from the us.

I just maidened it this morning on wheels and went straight to the lake. You honestly couldn't ask for a better flier. It has awesome power and with flaps it slows to a stand still. It does all the maneuvers rolls loops spins etc with ease but is calm enough to be a good trainer

My last float plane was a hz super cub with a fly one cessna wing w/flaps. It was lazy and tough to fly. The 182 couldn't be a better plane
Sign up now
to remove ads between posts
Jun 28, 2011, 07:39 AM
Registered User
Hi, video please!!!!! If poss.

Thanks
Eng30
Jun 28, 2011, 07:46 AM
dusty bible = dirty life
Majortomski's Avatar
Quote:
Originally Posted by Rooster433 View Post
I just maidened it this morning on wheels and went straight to the lake.



It floats on WHEELS!

Neat to read your excitement. Pics and vids would be nice.
Jun 28, 2011, 12:33 PM
Registered User
Thanks. I'll try to get some video.

I had it in a forward slip Sunday to kill airspeed and altitude to land right in the middle of two boat wakes. Well I slowed it down a bit too much and spun it about 15 feet off the surface. Forward slips are really neat but dangerous because it's cross controlled uncoordinated flight. Broke a couple little things but no big deal already got it flying again.
Jun 29, 2011, 06:43 PM
HellBentPuppet
pullup!'s Avatar
Quote:
Originally Posted by Rooster433 View Post
Hey guys, I just picked up a c-182 from hobby king with the optional floats. The plane with floats and 2 2200mah batteries 4s was $209 shipped from the us.

I just maidened it this morning on wheels and went straight to the lake. You honestly couldn't ask for a better flier. It has awesome power and with flaps it slows to a stand still. It does all the maneuvers rolls loops spins etc with ease but is calm enough to be a good trainer

My last float plane was a hz super cub with a fly one cessna wing w/flaps. It was lazy and tough to fly. The 182 couldn't be a better plane
Man I'm so glad you posted this!!

I am going to see family in Alaska in August. They have a live aboard sailboat and a live aboard motor vessel along with a couple skiffs and a 14 ft lund. I was told I would have access to a complete workshop on land as well. So I naturally ordered this 182 with floats and 3 2200 4s, its scheduled for delivery in AK July second.

Would you be willing to help me out with some logistics, I will be shipping my TX along with a box of hobby stuff to do the "build". I want to bring up up servos, esc,bec's, rx ect. since there are no hobby shops and I'll only be there 10 days.

So a few questions, I'll try not to bombard you

What style of battery connector does the ESC have on it? The bullet connectors, are they 3.5mm, 4mm.....

Are you running a BEC?

Any "must have" supplies you used in the build, I have 20min epoxy and CA going up in the delivery.

Thank you TONS in advance!! I have searched and info on this plane is scarce.
Last edited by pullup!; Jun 29, 2011 at 06:45 PM. Reason: i spel guud
Jul 01, 2011, 08:12 PM
FPV is lifestyle!
rolrossi's Avatar
Please,
Look at my build log for CESSNA 182 1,5 meter seaplane.
Thank you for comments.
Jul 01, 2011, 08:14 PM
FPV is lifestyle!
rolrossi's Avatar
Could somebody tell me what are the best control throws for for CESSNA 182 1,5 meters seaplane? (aile, elev, aileron and flaps)

Thank you
Robert.
Jul 04, 2011, 07:18 PM
Registered User
I'm using the most deflection I can get without the control surface binding with the pushrod. Same thing with flaps, i'm running as much as I can get.

I went to fly it friday and had a hard time getting it off glassy water. It just wants to be suctioned to it. While plowing threw the water for such a long time they took on some water so before flying this one you might want to seal the floats up better.
Jul 05, 2011, 06:43 PM
FPV is lifestyle!
rolrossi's Avatar

Humm...


I have tried to take off from water with some water inside floats...too bad...
I used so much elevator that I made a vertical climb from water when take off. Ir was so fast that I could not avoid crash. Now, I decided for a cam on the hook so I can see how things are going on far from my spot. Do you think it is a good idea?
Jul 16, 2011, 07:21 PM
Registered User
Well, I wrecked it today! Went out for the first time in a good year to do FPV stuff on land before taking it out to the lake tomorrow. Made about 5 flights then suddenly I lost all flight controls, pretty sure motor stopped also. I still had video.

I looked up, saw it spiraling in, then went back to the TV screen to try to watch exactly where it was going to hit. We are in a hilly area with tall grass. Anyway, I can't say I'm not disappointed but the carnage almost always makes up for it.

Great airplane. I'm ordering another tonight!


I just need to figure out if it was the receiver (HK orange), the FPV gear and maybe interference?, the ESC, etc? What caused the failure!?!?!
Jul 16, 2011, 10:18 PM
Registered User
Heres a picture 1 week prior to crash, great airplane!

Oct 10, 2011, 12:13 AM
Registered User
Just got my cessna rtf tonightI went out to test the thing for the first time with the floats on it and crashed it into the lake twice! Anyway it got off the water ok but immediatley was all over the place and nose dove into the lake. I am an experienced pilot but have never flown with floats on. It seemed to be way off balance, maybe underpowered? It flip flopped all over the place. I don't know it just did not want to fly well. One thing I noticed when building it was the motor was angled to the right so i put in some spacers to straighten it. Maybe It was supposed to be that way? The CG was near the leading edge of the wing and the flaps, ailerons and elevators were all even. Overall I like the plane but am scared to repair it and get it back in the air. It doesn't make much sense as to why it was behaving this way.
Oct 13, 2011, 09:17 PM
Registered User
If I read your post correctly your CG was close or at the leading edge. This is too far forward and would definitely cause a problem. Your CG should be closer to the wing spar area. You need to re balance your plane once you put floats on. Also, put the right thrust back the way it was.
Oct 17, 2011, 12:57 AM
\_(ツ)_/
how long did it take to get arrive?
Oct 31, 2011, 06:21 AM
Registered User
Pascal06's Avatar
Hi,

I' ve got one since last March and no time yet to test it....I changed the ESC because after a few "Bip", nothing happen and the steering servo ( broken gears ) ... maybe this week end if the weather is good !

Are the flaps really usefull on this plane ?

Thanks !


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Mini-Review Hobby King Cessna 182 RTF Deluxe / Skyartec Updated hipher Foamies (Kits) 14 May 04, 2015 07:28 PM
Build Log Hobby King 1.5 meter Cessna 182 w/ Floats WAFlyer15 Foamies (Kits) 5 Jul 01, 2011 08:07 PM
Discussion Hobby King 36" Cessna 182? CyberJay Waterplanes 0 Apr 23, 2011 09:01 PM
Sold HobbyKing Durafly Cessna 182 1.4m esa3 Aircraft - Electric - Airplanes (FS/W) 5 Mar 15, 2011 04:56 PM