Shop our Airplanes Products Drone Products Sales
Thread Tools
Old Dec 12, 2011, 10:49 PM
caotri is offline
Find More Posts by caotri
Registered User

Stick scale howto?


Dear, Sorry for my dum question. I read and you said alot about stick scale for addjust the sensity of stick command As i understand. So i just wonde how to do that, do i need to modify the code and recompile it?

Looking to hear from you. Thanks in advance
caotri
Sign up now
to remove ads between posts
Old Dec 13, 2011, 03:32 AM
Eastcoast78 is offline
Find More Posts by Eastcoast78
Dixie Normious
Eastcoast78's Avatar
First Flight of a Quad tonight for me! HK KK with miniQuad frame from HK, flashed X 4.7

Love it

Maiden flight of QuadCopter (7 min 33 sec)
Old Dec 13, 2011, 04:03 AM
bongmaster is offline
Find More Posts by bongmaster
I like things :3
bongmaster's Avatar
@Eastcoast78

nice little flier there cant wait to build summin up myself wen my board gets here XD
Old Dec 13, 2011, 04:12 AM
Eastcoast78 is offline
Find More Posts by Eastcoast78
Dixie Normious
Eastcoast78's Avatar
Its awesome, took a bit to get it dialled in! it wanted to YAW right big time, i had 25-30% expo first, i found the soft center of the stick made me over correct!! Then i test flew my friends 330 and liked his low expo feeling. On a DX6i i ended up with -5 on the YAW and -10 on the Pitch and roll.
EPA is set down to 50% and D/r's are
H/R's 80%
L/R's 60%


I turned the pots up till it started to osolate, then dialled them down till it smoothed out.

End result was hands off flying. And this was my first time ever flying a Quad.

CHeers
Old Dec 13, 2011, 04:50 AM
bongmaster is offline
Find More Posts by bongmaster
I like things :3
bongmaster's Avatar
kool stuffs :3
im completely noob as quads, even helis , i got a beltcp2 i havent been able to fly yet since winter came in, and only other things i got are IR micro helis, not the same XD

really want to make summin kool with the KK board :3
Old Dec 13, 2011, 05:18 AM
mlmcquiggjr is offline
Find More Posts by mlmcquiggjr
Registered User

hexa firmware in the HK KK board?


Will the HK KK board fly the hex firmware?
Old Dec 13, 2011, 07:35 AM
Cheralex is offline
Find More Posts by Cheralex
Registered User
Also, would like to thank KaptainKus for his firmware. I had a very pleasent maiden fly and installed gopro right on the next attempt. Very smooth and predictable.

Here is a small video from the second try we did on a Trikopter V2.5 frame with HK board + 1.6 trikopter firmware. Sorry for darkness, its getting so very early here

pogoniali maniu!! (3 min 20 sec)


P.S. Kaptain - are there any plans to continue improving software for chipsets with 16k flash on board?
Thanks,
Alexey
Last edited by Cheralex; Dec 13, 2011 at 07:41 AM.
Old Dec 13, 2011, 08:05 AM
quaddynamics is offline
Find More Posts by quaddynamics
Registered User
Quote:
Originally Posted by simonk View Post
The .hex file is encoded in ASCII hex ("intel hex") format, so it's bigger than the actual binary size. If you have the AVR Toolchain installed and/or can find an "objdump" or "avr-objdump" binary installed, you can run it as follows:
Code:
objcopy.exe -I ihex file.hex -O binary file.bin
That will copy the "hex" format to a binary format, which you can then either look at for the actual size. Also good for finding copyright notices, version strings, etc.
Simonk , thats really interesting , could you please tell me where can i get the objdump , i searched actually but i could not able to understand how to use it exactly , could you please help me in learning about the avr-objdump

thank you
Old Dec 13, 2011, 08:11 AM
sundust is offline
Find More Posts by sundust
Registered User
Hi everyone,
Im realy new to multirotors. My KK blackboard is on the way from DX ( http://www.dealextreme.com/p/kk-mult...ull-set-107408 )
I want to load X firmware to it. which one should I use? Can you please helpme?
Old Dec 13, 2011, 12:51 PM
tkoguy is offline
Find More Posts by tkoguy
R/C CRASHER
tkoguy's Avatar
Quote:
Originally Posted by sundust View Post
Hi everyone,
Im realy new to multirotors. My KK blackboard is on the way from DX ( http://www.dealextreme.com/p/kk-mult...ull-set-107408 )
I want to load X firmware to it. which one should I use? Can you please helpme?
I could tell you now if you get that usb programmer with that cable you will not be able to program your board. That programmer is not compatible. I just received one from Goodluckybuy and it does not work.
Old Dec 13, 2011, 12:54 PM
tkoguy is offline
Find More Posts by tkoguy
R/C CRASHER
tkoguy's Avatar
Quote:
Originally Posted by Douwe74 View Post
Hmmm, it's starting to feel like a lottery which one you will receive, below are photo's of the one I received a week ago from GLB, it is the same as displayed on the kk flash tool list of incompatible programmers:



read this post
Old Dec 13, 2011, 02:17 PM
sundust is offline
Find More Posts by sundust
Registered User


Thanks tkoguy... what to do now?
Last edited by sundust; Dec 13, 2011 at 02:36 PM.
Old Dec 13, 2011, 02:53 PM
bongmaster is offline
Find More Posts by bongmaster
I like things :3
bongmaster's Avatar
lucky i already have a usbtinyisp :3 got it for arduino boards and custom boards without FTDI, or for wen i want to do away with the bootloader and use all the space for the sketch.
Old Dec 13, 2011, 03:11 PM
tkoguy is offline
Find More Posts by tkoguy
R/C CRASHER
tkoguy's Avatar
get the one from HobbyKing, it works.
Old Dec 13, 2011, 03:15 PM
sundust is offline
Find More Posts by sundust
Registered User
ok thanks


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion NEW KK Multicopter Core Board V5.5 Quadcopter and firmware loader terriwang Multirotor Talk 1 Apr 05, 2016 05:21 AM
Sold KK Multicopter Core Board V5.5 Quadcopter and firmware loader $95 Shipped terriwang Aircraft - Electric - Multirotor (FS/W) 20 Jun 06, 2011 12:34 AM
Cool KK Multicopter Core Board V5.5 Quadcopter and firmware loader $95 Shipped terriwang Hot Online Deals 0 May 26, 2011 01:28 AM
Sold Quadcopter KK Multicopter RR or RTF w/Turnigy 9X -- Trades welcome KKUSA Aircraft - Electric - Helis (FS/W) 12 Mar 04, 2011 05:29 PM
For Sale SOLD, THANKS - COMPLETE KK QUAD RTF Kapteinkuk multicopter for sale bob.titus FPV Equipment (FS/W) 0 Nov 12, 2010 08:23 AM