Thread Tools
Old Nov 23, 2011, 12:36 AM
slim1357 is offline
Find More Posts by slim1357
Registered User
slim1357's Avatar
I've had the slow motor problem as well and dealt with it the same way most of you have. One issue that keeps popping up on my mini quad is that after a few minutes of flying, the quad develops a serious drift to port. I can immediately fix it by landing, bringing the motors to a stop and then taking off again. I do not disarm the board during this procedure. Does this sound like a hardware issue? anybody else get a similar thing happening?
As far as programmers go, I got the pocket avr from sparkfun, it came with the right kind of cable and has worked flawlessly.
Sign up now
to remove ads between posts
Old Nov 23, 2011, 12:46 AM
BlackCat_ is offline
Find More Posts by BlackCat_
Registered User
BlackCat_'s Avatar
Drift after flying for a few minutes seems to be normal. It seems to be worse if you don't let the board "aclimate" to the temperature outside before flying since the gyros are temp sensitive.
Old Nov 23, 2011, 01:42 AM
LazyZero is offline
Find More Posts by LazyZero
Master of Flash
LazyZero's Avatar
Quote:
Originally Posted by erazotropa View Post
Here M48 and M328

For scalestick Aileron 5 / Pitch 5 and Yaw 4
Can you also compile with scalestick 4 for all axes? That is what I added as "acro" to the flashtool.

Thanks Christian
Old Nov 23, 2011, 02:42 PM
urban pilot is offline
Find More Posts by urban pilot
Sent from my kk board

1st try - 1st crash


Quote:
Originally Posted by rernewe View Post
If you take off by accelerating quickly (still being careful of course) the effects of the slow motor seem to be minimal. It only seems to be an issue if you start very slowly, for me if i go to 1/4 stick fast (it's then light on the skids) all 4 motors seem to be ok, i can then proceed normally with no more slow motor effect. I don't know why it works but if i try a slow start i will then need to disconnect the battery, then re-connect and do the faster start to get rid of the symptoms. ......hope this helps.
I tried the quad today, trying to take off really slow to set the trims,
After i broke the number 4 prop and replaced it, i tried your way ( max trim on pitch fwd , aileron and rudder full left) .
At 1/3 throttle the quad was 3 meters in the air, but im new to quad ( used to nitro planes) i paniced and choped the throtle, and now i need a new frame
Its milan Vs barcelona tonight so the new frame will wait for tomorrow morning
Old Nov 23, 2011, 03:57 PM
panos2408 is offline
Find More Posts by panos2408
DXL Team Pilot FuriusP
panos2408's Avatar
Quote:
Originally Posted by Sympster View Post
I can confirm the lastest ones they are selling works fine on the HK V1 board, just flashed two of them. It is distinctive because it doesn't have the 10 to 6 cable adapter, it has a 6 to 6 adapter. I mean to say the programmer only has 6 pins. You can see in thier picture. Notice only 3 leads on each side of the board. There may be others that have that 6 pin header, I just haven't seen them. Works fine with www.fischl.de USBasp drivers. Can't guarantee which one they will send you, as when my friend recently ordered it they sent him the one pictured and the old one with the 10 to 6 wired adapter and the old one didn't work.
That's the one i have as well. It does the flash without any probs.
Old Nov 23, 2011, 04:31 PM
panos2408 is offline
Find More Posts by panos2408
DXL Team Pilot FuriusP
panos2408's Avatar
I have had same behavior on 4th motor. My problem is that it takes a lot more than half throttle to get it to spin. I programmed an "idle" switch which by flipping it starts all the motors at 30/100. Motor still not spinning even after disconnecting and reconnecting the battery. I can't program it to go more... I am pretty sure it will teleport to the nearest cloud 1600W on a 1.2kg quad is serious power.

Can anyone link me to the 4.5 version for Xcopter? I ve looked everywhere for it but couldn't find it.

My esc's don't plan on working on Mike's Burton FW. I am seriously thinking of throwing the board in the bin and try another. 5 Days I have been reading everything about FW and kkmulticopter board. It's always the same deal. I find the solution that works for everybody but not me
Old Nov 24, 2011, 11:22 PM
Sympster is offline
Find More Posts by Sympster
Registered User
Quote:
Originally Posted by panos2408 View Post
That's the one i have as well. It does the flash without any probs.
I just heard from another friend that he received the "no worky" type yesterday from GoodLuckBuy.com so I recommend not ordering programmers from them as you can't be sure which they'll send you.
Old Nov 25, 2011, 06:04 AM
panos2408 is offline
Find More Posts by panos2408
DXL Team Pilot FuriusP
panos2408's Avatar
Maybe they are not aware that they don't work. Maybe your friend can post them a link to this thread to enlighten them.
Old Nov 26, 2011, 11:41 AM
randall1959 is offline
Find More Posts by randall1959
Suspended Account
Does anyone have the direct link for the driver for the programmer in this ebay item?
http://www.ebay.com/itm/160679413985...84.m1497.l2649
I can't seem to find the driver for it. I thought I'd replace my home made one with one that was built exactly for this
Old Nov 26, 2011, 12:35 PM
LazyZero is offline
Find More Posts by LazyZero
Master of Flash
LazyZero's Avatar
http://fischl.de/usbasp/

Best Christian
Last edited by LazyZero; Nov 26, 2011 at 12:42 PM.
Old Nov 26, 2011, 12:40 PM
randall1959 is offline
Find More Posts by randall1959
Suspended Account
for some reason that like doesn't open
Old Nov 26, 2011, 12:41 PM
panos2408 is offline
Find More Posts by panos2408
DXL Team Pilot FuriusP
panos2408's Avatar
http://www.fischl.de/usbasp/ try this one download the usbasp.2011-05-28.tar.gz
Old Nov 26, 2011, 12:44 PM
LazyZero is offline
Find More Posts by LazyZero
Master of Flash
LazyZero's Avatar
Ups. Double post
Old Nov 26, 2011, 12:45 PM
LazyZero is offline
Find More Posts by LazyZero
Master of Flash
LazyZero's Avatar
Strange that the link does nOt work. But take the zip not the tar.gz.
Old Nov 26, 2011, 03:35 PM
randall1959 is offline
Find More Posts by randall1959
Suspended Account
Well, since I allready have one programmer that works, I decided to send the new one to my son, the computer guru and let him have a go at it. He's got a KK board too but didn't have a programmer.

Can one of you more experienced types point me to a programmer that goes well with Lazy Zero's flashtool?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion NEW KK Multicopter Core Board V5.5 Quadcopter and firmware loader terriwang Multirotor Talk 1 Apr 05, 2016 05:21 AM
Sold KK Multicopter Core Board V5.5 Quadcopter and firmware loader $95 Shipped terriwang Aircraft - Electric - Multirotor (FS/W) 20 Jun 06, 2011 12:34 AM
Cool KK Multicopter Core Board V5.5 Quadcopter and firmware loader $95 Shipped terriwang Hot Online Deals 0 May 26, 2011 01:28 AM
Sold Quadcopter KK Multicopter RR or RTF w/Turnigy 9X -- Trades welcome KKUSA Aircraft - Electric - Helis (FS/W) 12 Mar 04, 2011 05:29 PM
For Sale SOLD, THANKS - COMPLETE KK QUAD RTF Kapteinkuk multicopter for sale bob.titus FPV Equipment (FS/W) 0 Nov 12, 2010 08:23 AM