RVOSD - V5 - reports - Page 5 - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Jun 24, 2011, 01:02 PM
O <- this a ground loop
Quote:
Originally Posted by thygekm
I was just thinking the same thing.
I was sure that DOSD+ V2 was the only right think to get, but now that the RVOSD V5 comes with IMU I'm not so sure anymore.
I would really like to know how the AHI, RTH and all the other autopilot functions compares to the DOSD.

TK.
Airspeed is protoyped and dedicated IMU coming soon
Sign up now
to remove ads between posts
Jun 24, 2011, 01:17 PM
Registered User
Hooks's Avatar
I'm sure we will see resellers of the Rvosd very soon. So we all can enjoy this Great system.

Remember to make sure you reducere/remove vibrations from motor and prop. Too much vibrations = crash. Since Vova don't sell an anti vibrations mounth you will have to make one youself.
Jun 24, 2011, 02:59 PM
Registered User
Elcheapo's Avatar
Quote:
Originally Posted by devfor
Airspeed is protoyped and dedicated IMU coming soon
It is ok
Last edited by Elcheapo; Jun 24, 2011 at 03:03 PM. Reason: Toke it the wrong way.
Jun 27, 2011, 08:53 AM
Registered User
mr.utopia's Avatar
OSD received! EMS shipping rules - shipped to EU in only 5 days! I will report back as soon as I have flown with it, probably tomorrow morning if the weather is good.
Jun 27, 2011, 09:23 AM
Registered User
tushev's Avatar
Hey Alex, are you planning and when, to have in stock Plug and Play replacement GTOP FGPMMOPA6 10Hz GPS module? I am a very sloppy solder and I ruined the traces of one module already I will not mind to pay extra $$ for Ready to Plug GPS.
Cheers,
G
Jun 27, 2011, 10:58 AM
Registered User
wallaguest1's Avatar
i can't understand why autopilot waypoints is restricted just for USA
if the senseless terrorist excuse is used, shouldn't be restricted to be used in the rest of the world but USA?
Jun 27, 2011, 11:39 AM
The way of being is doing.
IMEIV's Avatar
I guess some of you have read on RangeVideo's forums that Alex recommend a perfect balance of engine and propeller for the proper functioning of IMU. I have always balanced fixed propellers but frankly I'm not able to balance an engine and do not know a method to balance the folding propeller that I use on my FPV flying wings.

Have you a method to recommend?
Jun 27, 2011, 12:11 PM
Registered User
Elcheapo's Avatar
Start by balancing the propeller, then check the vibration indicator. If it is ok you don't have to worry about the motor. Else balancing a motor is a bit more complicated, You can either buy a big name motor, or buy an NTM series motor from hobby city, like I did. They are balanced from factory.
Jun 27, 2011, 12:15 PM
FPV Desert Beta Test Center
Quote:
Originally Posted by IMEIV
I guess some of you have read on RangeVideo's forums that Alex recommend a perfect balance of engine and propeller for the proper functioning of IMU. I have always balanced fixed propellers but frankly I'm not able to balance an engine and do not know a method to balance the folding propeller that I use on my FPV flying wings.

Have you a method to recommend?
It is important that the prop is balanced for both total blade/blade weight and hub (side to side).

An outrunner can be balanced by removing the can and using a suitable shaft on a good prop balancer.

A folding prop would be balanced the same as a fix prop but obviously the blades need to be somehow held out.
Jun 27, 2011, 12:17 PM
Registered User
https://www.rcgroups.com/forums/show...postcount=8839

for how to balance a motor
Jun 27, 2011, 01:44 PM
Registered User
Gary,
You should have yours flying by now. We expect a full report.
Jun 27, 2011, 03:11 PM
The way of being is doing.
IMEIV's Avatar
Quote:
Originally Posted by Elcheapo
Start by balancing the propeller, then check the vibration indicator. If it is ok you don't have to worry about the motor. Else balancing a motor is a bit more complicated, You can either buy a big name motor, or buy an NTM series motor from hobby city, like I did. They are balanced from factory.
Quote:
Originally Posted by Gary Evans
It is important that the prop is balanced for both total blade/blade weight and hub (side to side).

An outrunner can be balanced by removing the can and using a suitable shaft on a good prop balancer.

A folding prop would be balanced the same as a fix prop but obviously the blades need to be somehow held out.
Now I'm waiting that RVOSD Gen.5 arrives and I will try your advice when it comes. Gary I see your mounting solution in RangeVideo's forum. For me it's a simply and great solution !!!

Gary, want to say that I have to remove the shaft to balance the motor and insert another suitable for prop balancer ?
Jun 27, 2011, 03:20 PM
FPV Desert Beta Test Center
Quote:
Originally Posted by IMEIV
Gary, want to say that I have to remove the shaft to balance the motor and insert another suitable for prop balancer ?

You would need a shaft that fits your balancer. The OEM motor shafts are pretty short but if it works use it. If not you would need to find a longer shaft.
Jun 27, 2011, 03:24 PM
The way of being is doing.
IMEIV's Avatar
Quote:
Originally Posted by Gary Evans
You would need a shaft that fits your balancer. The OEM motor shafts are pretty short but if it works use it. If not you would need to find a longer shaft.
Ok Gary. Thanks
Jun 27, 2011, 04:38 PM
Registered User
avropilot's Avatar
Got Mine installed in the Skywalker. Will post up some video if the weather gets better around here.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Maiden Reports 12345 Arizona Model Aviators 744 Oct 16, 2015 10:17 PM
Help! RVOSD thermal sensors rcmonster99 FPV Talk 16 Jun 20, 2011 11:21 AM
Discussion Weekend weather reports neck Arizona Model Aviators 13 Jun 10, 2011 05:59 PM
Discussion where are the Joe Nall horror "reports? guy hanson Radios 49 May 18, 2011 01:06 PM
Discussion Finally Fixed the Country Reports daboz Dynamic Soaring 5 May 16, 2011 03:51 AM