New Products Flash Sale
Aug 04, 2012, 12:32 PM
Registered User
can someone explain how to get 9x 3 switch to work with the default firmware`?
Sign up now
to remove ads between posts
Aug 04, 2012, 01:01 PM
Registered User
Elcheapo's Avatar
Quote:
Originally Posted by timtimtim View Post
can someone explain how to get 9x 3 switch to work with the default firmware`?
http://rangevideo.com/forum/showthre...switch+digikey
Aug 04, 2012, 02:02 PM
Registered User
Quote:
Originally Posted by Elcheapo View Post
Thanks but that didnt help me at all, thats for er9x i have the standard firmware that comes with the 9x.
Aug 04, 2012, 10:39 PM
AMF Years
7oneWo1f's Avatar
Quote:
Originally Posted by timtimtim View Post
Thanks but that didnt help me at all, thats for er9x i have the standard firmware that comes with the 9x.
I think you can do a firmware change.
Aug 04, 2012, 10:41 PM
AMF Years
7oneWo1f's Avatar
Okay, so I just ordered one of these. Anybody using this with a hercules? I have the 78" version, and am wondering if I could set up the standard elevator/elevons/rudder, but only use the elevons for RTH and waypoints?
Aug 05, 2012, 04:55 AM
Registered User
Gree's Avatar
OK guys what do you think is the issue here...

weird AHI (0 min 27 sec)


My horizon won't set it seems....
Aug 05, 2012, 05:30 AM
Great Britain
MrBen.'s Avatar
You are doing it in the air with power on, try in the air with power off or better still on the ground
Aug 05, 2012, 06:43 AM
Registered User
Gree's Avatar
I do it on the ground as well several times with no motor on. Same thing, the horizon just stays low and doesn't align.

???
Aug 05, 2012, 07:48 AM
Registered User
dayanki's Avatar
Quote:
Originally Posted by Gree View Post
I do it on the ground as well several times with no motor on. Same thing, the horizon just stays low and doesn't align.

???
In the Main Menu page 1/4, set FPM Position Adjust to lift the position of the horizon. With the plane on the ground and leveled set neutral AHI (page 1/3 In Flight Menu)
Aug 05, 2012, 10:28 AM
The Flying Circus
ommadawn's Avatar
Quote:
Originally Posted by RUBNorris View Post
ok I'll give it a shot when i get back. (my router just died)
Also my motor keeps beeping and will not throttle up, so im guessing i have no signal. Everything else works but motor. kinda funny?
Does the screen say Receiver not detected?
Have you got throttle channel reversed? Or correctly assigned ?
Aug 05, 2012, 01:20 PM
Registered User
picard10th's Avatar

Thanks Vova!


Initial test indicate OSD is working properly. Appreciate the 1 day repair turnaround and free service. The vibration meters work now too, I thought that was a firmware issue did you reflash firmware? still says 5.07 or was it related to the missing L9-L10 whatevers?
I can recommend Range Video and will look first to you for my future equipment purchases. Any Idea when RVGS will be avail?
Thanks!
Aug 05, 2012, 01:48 PM
Registered User
Elcheapo's Avatar
Quote:
Originally Posted by Gree View Post
I do it on the ground as well several times with no motor on. Same thing, the horizon just stays low and doesn't align.

???
Do it on ground, pitch the aircraft up the desired amount. Set neutrals, save configuration. Turn Off the OSD, then turn ON, make sure the airplane do not move during the first 30 seconds.
Aug 05, 2012, 02:34 PM
Registered User
How important is it to place rvosd horizontally in the fuselage? Is it sensitive OR can i calibrate it?
Aug 05, 2012, 05:45 PM
Registered User
Elcheapo's Avatar
The software can reverse the pcb front-rear, and roll to 90-180-270
Aug 05, 2012, 06:07 PM
Registered User
Gree's Avatar
Thanks guys will try all those things again, although I am sure I have done them all already.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Maiden Reports 12345 Arizona Model Aviators 744 Oct 16, 2015 10:17 PM
Help! RVOSD thermal sensors rcmonster99 FPV Talk 16 Jun 20, 2011 11:21 AM
Discussion Weekend weather reports neck Arizona Model Aviators 13 Jun 10, 2011 05:59 PM
Discussion where are the Joe Nall horror "reports? guy hanson Radios 49 May 18, 2011 01:06 PM
Discussion Finally Fixed the Country Reports daboz Dynamic Soaring 5 May 16, 2011 03:51 AM