Thread Tools
Old Jun 16, 2011, 10:53 PM
f22 parkflyer is offline
Find More Posts by f22 parkflyer
fly away,fast
Build Log

Red Wing Rc 30cc Mx2 best 30cc out there


Hello everyone. I am going to put a thread together on the Red Wing RC 30cc Mx2.
This plane is by far one of the best 3d 30cc planes out there.

Take a look at the spec that are awsome.
Wingspan 73"
Wingarea 1025 sq in (66sq dm)
Length 68"
Flying weight 9.5 to 10lbs TRUE AUW!
(with gas set up ours came to 9.7lbs WITH spinner wheel pants EVERYTHING!)
Engine 26cc to 30cc gas
Radio 6ch

This plane is super light!! and IT EVEN COMES WITH A SPINNER!!!!

The 30cc Mx2 also has some very nice Features such as.

Strong and light construction
Carbon fiber wingtube
Foam turtle deck, for super smooth finish
Fiberglass double truss control horns
Ringed Cowl for no external screws
Aerfoiled tail wings - scale and better flight
Prehinged Wings, partially hinged tail
Beautiuful painted fiberglass cowl and wheel pants
High quality Ultra-Cote covering
Full bodied true to scale appearance
Finished cockpit area, requires no work by you
Pre plumbed tank, ready for gas.


You might not believe it but this plane is ready for a tuned pipe!!!!
Yeah thats right. It has a tuned pipe tunnel already running through the bottom of the airplane
Here is some build videos.
Plane overview http://www.youtube.com/user/RedwingR...28/mdnin-aKQb4

Part 1 http://www.youtube.com/user/RedwingR...27/lTuwVHMs2zM

Part 2 http://www.youtube.com/user/RedwingR...26/YZ7UN3Jfv4Q

Part 3 http://www.youtube.com/user/RedwingR...25/UPGdJymXktQ

Part 4 http://www.youtube.com/user/RedwingR...24/-E4fAHMtS34

Part 5 http://www.youtube.com/user/RedwingR...23/W0NWFTa1MF8

Part 6 http://www.youtube.com/user/RedwingR...22/d7f2y8hoWtE

Part 7 http://www.youtube.com/user/RedwingR...21/AgE2qau_9B8


If you have any questions please feel free to ask and I will be happy to answer them.
Last edited by f22 parkflyer; Jun 16, 2011 at 11:14 PM.
Sign up now
to remove ads between posts
Old Jun 17, 2011, 08:18 AM
kerwin50 is online now
Find More Posts by kerwin50
Registered User
kerwin50's Avatar
I have the green goldwing version with a DLE 30.
I beefed up the formers around the landing gear block with fiberglass an light ply.
With the CG in the middle of the wing tube it was hard for me to land the plane in a nose high condition. I went to the 4 7/8 CG for now.
It's a great plane to fly.
I did manage to put it in the top of a tree coming out of an outside snap she was in a deep stall. I should of went WOT and used thrust vectoring to pull out of it.
It's fine though I used a boom truck to get it out.
I'm having a buddy put the decals on it now.
Old Jun 17, 2011, 08:32 AM
f22 parkflyer is offline
Find More Posts by f22 parkflyer
fly away,fast
Nice to here. These look great at 3d. and sorry to hear about the tree.
Old Jun 17, 2011, 05:50 PM
kerwin50 is online now
Find More Posts by kerwin50
Registered User
kerwin50's Avatar
I'm not really a 3D pilot but I do some 3D.
I recommend the carbon fiber landing gear from redwing for anyone flying with a more rearward cg.
I had mine at 5 1/4 and my poor landing gear really got abused. I have it at 4 7/8's now and she flys and lands like a trainer, well maybe alittle faster LOL
Old Jun 17, 2011, 09:00 PM
f22 parkflyer is offline
Find More Posts by f22 parkflyer
fly away,fast
LOL I love to fly 3d myself and harrier landings are the best with a tail heavy plane haha
Old Jul 05, 2011, 10:17 AM
gregory.da is offline
Find More Posts by gregory.da
ProBro, 3D
gregory.da's Avatar
I had the opportunity to fly a buddies MX2 this past week. His is set up with the 28cc J?? gasser they sell. What a nice aircraft, flys like it's on rails, lands slow, the all up weight of 10.5# really makes for a 3D capable setup. I hovered a little, but that's about it for 3D moves (not my airplane). As long as you don't do a smack-down on good old mother earth, it's a winner!
Old Nov 06, 2014, 01:28 PM
pablopanz is offline
Find More Posts by pablopanz
Registered User
Hello.

can you tell me if there is any place where i can get spare parts for this plane ?

I need one canopy, and possibly a fuselage...

Thanks !


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Gold Wing RC SBACH-342 V3 30CC / 73" / 26% eJets Giant Electric Planes 26 Nov 26, 2011 01:43 PM
Question Best park jet out there? slyfoxflyer66 Electric Plane Talk 6 Apr 28, 2011 06:31 PM
Discussion What is the best Extra or Edge between 46"-59" out there? KillerCut 3D Flying 39 Mar 18, 2011 08:56 PM
Discussion best rc car out there.. 1jet14 Electric Power Cars 8 Apr 02, 2009 04:07 PM
Upgrading from a Zagi 400X, whats the best wing out there (48") RandyK1 Foamies (Kits) 9 Jul 22, 2003 09:23 PM