My new Mini quad named Funsize!! I'm having a blast flying this little guy. Here is a quick video showing its maiden flight. Need to tune it in some more but its a start. Had to turn everything down it tends to flip very fast and easy Going to be painting it later so I can tell which way it is flying.

Specs:

Motor to motor distance 8 inches
1/8 inch lite ply frame, cut on cnc router
weighs 190 grams with battery
147 grams without battery
5x3 EPP Propellers (Standard and Counter Rotating)
18-11 2000kv Micro Brushless Outrunner (10g)
TURNIGY Plush 6A Speed Controller
Arduino Pro Mini
6 DOF board with ITG3200 gyro, BMA180 acc

Funsize Mini Quadcopter (2 min 2 sec)

Can you please share the Sketchup file so we can make our own mini's?

I realy like your design!

Thanks for your interest!! Much apprieciated. You can buy these minis here and here is the thread started on it here

But if you like to make your own, just please pm me with your email addy and I will send you the files. IU have the sketup files or the DXFs as well.

Or another one.... https://www.rcgroups.com/forums/show...5&postcount=33 (I can provide free plans if interested)
And the movie: https://www.rcgroups.com/forums/show...7&postcount=32

Originally Posted by mifau

Or another one.... https://www.rcgroups.com/forums/show...5&postcount=33 (I can provide free plans if interested)
And the movie: https://www.rcgroups.com/forums/show...7&postcount=32

Nice little quad you have there!! Going to be checking it out some more fro sure.

Originally Posted by mifau

Or another one.... https://www.rcgroups.com/forums/show...5&postcount=33 (I can provide free plans if interested)
And the movie: https://www.rcgroups.com/forums/show...7&postcount=32

Very interesting.........

more pics added

Great directions, very easy to follow.....I was waiting on the latest set of pics addressing the shield, cable and pin orientation. I have acquired a row of pins, now to attach them to the shield......then.......some advise or step-by-step stuff on programming the control board.

In case I haven't thanked you...thank you....thank you....thank you.

Have a safe and joyous New Year celebration, Terry.

Me....it's a feat when I am still awake at midnight.....

Paul

Hi Paul!!

Did'nt see you posted here till now. Sorry about the long delay. What kind of help do you need on the programing side? A complete beginner guide? Do you have the software downloaded for the ardunio? Can get it here... http://arduino.cc/en/Main/Software

Have downloaded the software for the ardunio.....need beginner guide. Thanks for your help.

Sure thing. I will start one hopefully after work in the morning.

Hello mifau, I´m indeed interested in the plans to try the design in lexan.
żIts there a change to get them?

Thanks in advance.