Jan 01, 2012, 11:03 PM
I B Chargin'
Charger's Avatar
So ahhhh.......how's it going?? Who's flying, who's building, and who's repairing?? I took my old servo out and roughed up the inside of the wing. I think I'll lay down a slow cure layer of epoxy to even out the bed for the new servo. I'm kind of scared of bonding the new servo in. Those Hyperions are so thin walled, I think I'll run a 20 minite epoxy rim to bond the new servo in. I'm afraid CA would shrink and distort the case, leading to friction on the gears. Been a week since I ordered, hope I get the new servo soon.
Sign up now
to remove ads between posts
Jan 01, 2012, 11:15 PM
Livin it UP when Im goin DOWN
Arcteryxxx's Avatar
Repairing. New flap servo received.
Jan 01, 2012, 11:18 PM
I B Chargin'
Charger's Avatar
Quote:
Originally Posted by Arcteryxxx View Post
Repairing. New flap servo received.
So where are you at on your repair??? It would be too cool to think that's the last thing you need to be ready to fly!!
Jan 01, 2012, 11:24 PM
Livin it UP when Im goin DOWN
Arcteryxxx's Avatar
Found a small chip missing in the topcoat that I have to fix. Other than that the servo is the last major issue. The harness being the trickiest part to redo...
Jan 01, 2012, 11:36 PM
200mph +
sykotic's Avatar
Still waiting

I've built myself a new way of plugging in servos to hopefully keep it out of the way of the battery. Just need a x plane
Jan 01, 2012, 11:42 PM
DroneWorlds - TEAM NEW ZEALAND
jackosmeister's Avatar
^ Any pics?, coincedentally I thought of re-making my X's wiring harness tonight

Weather better sort itself out quickly...
Jan 01, 2012, 11:47 PM
Livin it UP when Im goin DOWN
Arcteryxxx's Avatar
No pics avaliable from me I'm afraid. Thinking maybe I'll do the lazy trick and solder the servo wire from the old servo to the new from the servo bay side.
I have also decided not to put the aft wing bolt retainer (and plate) back in but will use tape for fixing it before each flight. More room for the wires this way.
Jan 02, 2012, 12:10 AM
I B Chargin'
Charger's Avatar
Quote:
Originally Posted by Arcteryxxx View Post
Found a small chip missing in the topcoat that I have to fix.
When she's a virgin.....that's an issue. It's almost fun to break her in real hard and not worry about esthetics!! Seems like when they're too pretty, I don't wring them out as hard as after they have obviously seen some action. Save some time and fly with the chip.
Jan 02, 2012, 12:15 AM
Livin it UP when Im goin DOWN
Arcteryxxx's Avatar
Just gotta make sure it won't be the start of a larger crack. Easy fix and accessible on the 5 o'clock position one inch in front of the LE.
Jan 02, 2012, 02:15 AM
One Idiot is plenty...
Dbox's Avatar
Quote:
Originally Posted by sykotic View Post
Still waiting

I've built myself a new way of plugging in servos to hopefully keep it out of the way of the battery. Just need a x plane
Sorry guys,being WAY too busy at work,way too busy.
Building, but very slow,little by little.
couple more weeks and I will be able to work on XXX again at full speed
Yuri.
Jan 02, 2012, 02:17 AM
200mph +
sykotic's Avatar
Quote:
Originally Posted by Dbox View Post
Sorry guys,being WAY too busy at work,way too busy.
Building, but very slow,little by little.
couple more weeks and I will be able to work on XXX again at full speed
Yuri.
No problem dude, I understand!

Work always gets in the way
Jan 02, 2012, 02:18 AM
Livin it UP when Im goin DOWN
Arcteryxxx's Avatar
Quote:
Originally Posted by Dbox View Post
Sorry guys,being WAY too busy at work,way too busy.
Building, but very slow,little by little.
couple more weeks and I will be able to work on XXX again at full speed
Yuri.
Can you please give us a hint on what to eXpect? Larger than the X, or???
Jan 02, 2012, 02:48 AM
Registered User
All I know is I want it...
Jan 10, 2012, 11:38 AM
I B Chargin'
Charger's Avatar

Hyperion DS09 AMD Metal Gear Digital Servo


I checked ALLeRC and Air Craft World, for a Hyperion DS09 AMD Metal Gear Digital Servo that I need for my X-Plane. They say they're out of them. I would like one of these to match what I've get so the voltage and servo speed will be the same. My favorite USA suppplier site said they had them and took my money on 12/24.........I called them yesterday, and they said they don't have any now............does anybody know where I can get one?? Anybody have an extra laying around I could buy??
Jan 10, 2012, 12:14 PM
Sure it'll work
Flyextreme's Avatar
I just checked one of the distributers, and they are out of all the DS09s. They do have gear sets though.

I was waiting to replace my tail servo with a DS09, but may go with a D60 or such. No one seems to have a solid ETA on Hyperions. I think a few ETAs have come and gone.

http://www.empirerc.com/servos-c-35....del-a&x=26&y=7

Bill


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Blade MCP X - owner's thread rchelijc Micro Helis 13419 Jul 31, 2016 03:58 PM
Discussion MCP-X thread for people that dont have a MCP-x axelen Micro Helis 186 Apr 01, 2011 01:17 AM
Data mCP X (non chat) setup and tips owners thread Cable Guy Micro Helis 9 Mar 12, 2011 11:50 AM
Build Log Build Log - ARK X-500 series build thread cfrank2005 Electric Heli Talk 30 Jun 29, 2009 12:27 PM
RBC A-4 Skyhawk build thread X.X Willmsy Electric Ducted Fan Jet Talk 6 Nov 22, 2005 10:01 PM