Shop our Airplanes Products Drone Products Sales
Jun 21, 2011, 11:03 PM
One Idiot is plenty...
Dbox's Avatar
Quote:
Originally Posted by epwierman View Post
Looking forward to seeing Yuri's next designs.
Not mine ,but Sebbe's,I just distorted some lines a little

You know Jacko,I had same idea to make X-plane X-lite,but no matter how hard I tried to tip stall her,she was still under control,even on turn.
I cant say I am flying her heavy loaded but she is bit over 1Kg .
Yuri.
Sign up now
to remove ads between posts
Jun 22, 2011, 02:56 AM
"The Judge"
sebbe's Avatar
How many Amps will a 16/40/1 + KPG 27 5.2:1 + 16x17slim + TP G6 2200mah 5s 45 C be ?

Yuri, the TP G6 2200mah 5s 45 C will fit in X-plane, they are only 41mm heigh.
Jun 22, 2011, 07:52 AM
Registered User
WimH's Avatar
Quote:
Originally Posted by sebbe View Post
How many Amps will a 16/40/1 + KPG 27 5.2:1 + 16x17slim + TP G6 2200mah 5s 45 C be ?
Impossible to say, depends on battery temp, airplane speed, speed controller brand and settings, etc. etc.
Jun 22, 2011, 09:34 AM
"The Judge"
sebbe's Avatar
Quote:
Originally Posted by WimH View Post
Impossible to say, depends on battery temp, airplane speed, speed controller brand and settings, etc. etc.
Yepp, but if you say 20 degree celcius, plane is flying straight up, esc ice 100-200A, setting ?? would that matter. maybee a few amps.

Im not talking about knowing if its 172.7 or 169.8 amps..

More like 170-180, or 160-170 ..
Jun 22, 2011, 09:40 AM
The Kid
Thekid3418's Avatar
Looks like 200A to me. I've found this calculator to be fairly reliable, so I would guess its within 5% of this number in either direction...

Kid
Jun 22, 2011, 10:06 AM
"The Judge"
sebbe's Avatar
well I think it will be a bit lower, you are using a custom 16x17 propp wich probably is much wider then the 16X17 slim, therfore draw more amps, and I also think a 4900mah lipo will rise the amps a bit compared to mine 2200mah..

I would guess around 170. maybee a bit more like 175-180 the first seconds of the fully charged lipos..

Yuris setup wich is exactly like mine, just he has a 3600kv motor draws 200 amps.

Tanks Kid for the calc, will play a bit with it, fun..
Jun 22, 2011, 01:02 PM
The Kid
Thekid3418's Avatar
Thats an old 4900mah battery, meaning the IR is comparable to a modern 2200 mah battery. Note the voltage under load is only 15.66V in that simulation, which is likely LESS then you'll actually experience.

Furthermore, the prop constant for a "thin-folding prop" is 1.18 according to the calculator. I made my prop constant 1.03, based on my real life experience with my own personal 16x17S that I have done calculations for.

So, i'm rather confident that your current will be very close to that. I've spent a fair amount of time shuffling numbers around that program

Kid
Jun 22, 2011, 02:01 PM
"The Judge"
sebbe's Avatar
OK, I can live with 200 amps, so it seems there is no difference in having a 3150 or a 3600 kv motor, I thougt there would be a gap between these motors, even though Yuris motor is 9 gram lighter.

Ok, anyway even if the amps are around 180-190 , I still have to get a bigger esc...
maybee I should wait for the ICE 150 to come out, would be the perfect one for this.
Jun 22, 2011, 02:41 PM
Registered User
epwierman's Avatar
Kid, you have a pm. Thanks, E
Jun 23, 2011, 08:00 AM
"The Judge"
sebbe's Avatar
Yuri, dont torture me , Maybee a small preview(picture) of something, like the fuse...

Sebbe, just eating and eating
Jun 23, 2011, 09:58 AM
One Idiot is plenty...
Dbox's Avatar
Quote:
Originally Posted by sebbe View Post
Yuri, dont torture me , Maybee a small preview(picture) of something, like the fuse...

Sebbe, just eating and eating
Dont eat Yourself Sebbe,I'll post when I have something to show You.
Yuri.
Jun 23, 2011, 10:46 AM
"The Judge"
sebbe's Avatar
Quote:
Originally Posted by Dbox View Post
Dont eat Yourself Sebbe,I'll post when I have something to show You.
Yuri.
Jun 24, 2011, 12:00 AM
One Idiot is plenty...
Dbox's Avatar
Sebbe,You may need stop eating now and say something.
Yuri.
Jun 24, 2011, 12:27 AM
Registered User
Highfly!'s Avatar
Yuri this is totally wild! I may order another X-Plane just because....

Sebbe you beter decide on your power system as this thing will be at your doorstep before you know!

Ok, my turn
Jun 24, 2011, 03:07 AM
"The Judge"
sebbe's Avatar
OMG, OMG....

Yuri, are you from another world ?

This is by fare the most amazing work I have seen, Not just beacause this is my plane, but I think its on of the best x-planes so far design wise..

you are the MASTER, you make the most beutiful planes in the world, period.

I think the Viper and Jibe looks like poor man design/colours/finish compared to this one..


Yuri, I dont have more words now, you changed the design a bit and its 10 times better then I would imagane ever..

Im speechless Yuri..... PLEASE PLEASE , send it VERY WELL PACKED... If that thing breaks, I WILL DIE..

Sorry, I have to eat again, I feel like a kid waiting for a package for christmas



cant wait see the stab and fuse together wit that AWSOME looking wing..


SEBBE..
Last edited by sebbe; Jun 24, 2011 at 05:04 AM.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Blade MCP X - owner's thread rchelijc Micro Helis 13419 Jul 31, 2016 03:58 PM
Discussion MCP-X thread for people that dont have a MCP-x axelen Micro Helis 186 Apr 01, 2011 01:17 AM
Data mCP X (non chat) setup and tips owners thread Cable Guy Micro Helis 9 Mar 12, 2011 11:50 AM
Build Log Build Log - ARK X-500 series build thread cfrank2005 Electric Heli Talk 30 Jun 29, 2009 12:27 PM
RBC A-4 Skyhawk build thread X.X Willmsy Electric Ducted Fan Jet Talk 6 Nov 22, 2005 10:01 PM