Aug 31, 2012, 07:48 AM
Drinks Day Old Expired Milk
VooDoo Child's Avatar
Quote:
Originally Posted by johnnyrocco123 View Post
That right there is one of the 3 main reasons I got rid of all my geared setups.

Sorry to see that.

I never got used to having my throttle on a switch.
Yup,burned down 1-Kira,1-CC125,1-CC100,couple spinners and props...that's some big dollar humbling
Sign up now
to remove ads between posts
Aug 31, 2012, 07:50 AM
Drinks Day Old Expired Milk
VooDoo Child's Avatar
Quote:
Originally Posted by miche View Post
Voodoo, what 100ice firmware version do you have it?. What about some static test, you did them before fly..
Regards
latest firmware ...and no on the static..I figured all was good cause many have run this setup,and all was just fine with the 14.5X14.
Last edited by VooDoo Child; Aug 31, 2012 at 08:39 AM.
Aug 31, 2012, 07:54 AM
Drinks Day Old Expired Milk
VooDoo Child's Avatar
Quote:
Originally Posted by War Machine View Post
Doug, that hurts man !
Were you using a separate RX pack ? I would have thought you'd still have control even if the ESC was the cause of the crash.
Yes I have a cc10 BEC w/2 cell lipo....and I did fly it for a second,enough to get the wings level,and if I pulled any harder on the elevator,it would have stalled.I did the best I could for launching,and just getting my hands back on the TX.But like I said,this plane is wicked strong,and damage to it is minimal ....but I am sick of if cutting off on me.
Aug 31, 2012, 08:26 AM
SB7
SB7
I am actually really slow
Thats strange it decided to die just on a prop change.

Must be getting tired of those Castle Cremations speed controllers now aye Voodoo
Aug 31, 2012, 08:54 AM
Registered User
GonePostal's Avatar
Hard to watch the hit .But glad to know the damage was minimal.
Hope you get it sorted out.
Aug 31, 2012, 08:56 AM
"The Judge"
sebbe's Avatar
Maybee time to try another brand of esc,,, VooDoo... CC aint working for you(and a few others) for some reason,, sorry for this...

I know it gets more expensive now if CC is not a choise.. Still its strange it just shutdown like that..

My first intension was F5B setup on my viper, but no way, to many problems with this setup (driving eveything above their limits), and there is the "thrills" of launching also... Im going for geared F5B 11x22 prop...

I hope you get it sort out... both with the setup and plane, and what you you want from here..
Last edited by sebbe; Aug 31, 2012 at 11:46 AM.
Aug 31, 2012, 09:16 AM
SB7
SB7
I am actually really slow
A lot of the heli guys are loving the hobby wing controllers, I know it's a cheaper brand but when we got sick of the cc's catching fire we tried hobby wing's and they have been flawless. The specs say the 100A version can take 150A burts. Might be worth a look. I havnt touched the 100A version personally, only the HV120 with the fans mounted.

Still, I've been keeping an eye out for old Phoenix 125's I wish castle still made them, one of the best controllers they have made in my opinion.
Aug 31, 2012, 09:39 AM
"The Judge"
sebbe's Avatar
the HW 100A escs are no problems at 100A and maybee 150A in bursts, but I dont think they will last long at 170-200A... otherwise they are VERY good escs, have like 4-5 of them and running them within their specs.

How about Joes modified 200A ?
Aug 31, 2012, 06:58 PM
Drinks Day Old Expired Milk
VooDoo Child's Avatar
Yuri,i do not know how you do it,but the only damage to my X-Plane airframe,is a bit of lifted paint where the lipo spread the fusalage The Motor mount is even rock solid...it blows my mind that twice i have Smacked this thing face first into the ground,and the only damage is a spinner,and prop blades but i am miffed about the ESC,the lipo did not even hit it,it has no smell,and no melted shrink wrap...it looks and smells brand new,except that it does nothing when powered up.I went to plug it in to check the log,and it burned out my Multi-Usb port .
Aug 31, 2012, 07:45 PM
Drinks Day Old Expired Milk
VooDoo Child's Avatar
And the X-Plane is now ready to go again...There was no way i was going to go without it,on this 3 day holiday weekend I am sure things will go better tomorrow.....This thing is an OX
Aug 31, 2012, 10:58 PM
One Idiot is plenty...
Dbox's Avatar
Quote:
Originally Posted by VooDoo Child View Post
Yuri,i do not know how you do it,but the only damage to my X-Plane airframe,is a bit of lifted paint where the lipo spread the fusalage :.
I have a simple answer for it.
VC You are an expert in powerless launches and You know how to wreck a plane
right way.
I am just a beginner and totaled my X even without even asphalt runway.
You know,,they say......"launch all ways above the grass"
But ,who is listening?
Great spirit VC.
I am gonna fly for 3 days as well.
Happy launches.
Yuri.
Aug 31, 2012, 11:47 PM
Registered User
stanordave's Avatar
at least you guys have grass...

a rare sight here in the desert...
Sep 01, 2012, 06:01 AM
Speed Demon
GregG's Avatar
Quote:
Originally Posted by VooDoo Child View Post
And the X-Plane is now ready to go again...There was no way i was going to go without it,on this 3 day holiday weekend I am sure things will go better tomorrow.....This thing is an OX
So, what ESC are you running now?
Sep 01, 2012, 02:52 PM
Livin it UP when Im goin DOWN
Arcteryxxx's Avatar
Hmmm The sound of a 7x13 turning at 20k rpm

7x13 static (0 min 23 sec)
Last edited by Arcteryxxx; Sep 01, 2012 at 03:00 PM.
Sep 01, 2012, 03:17 PM
"The Judge"
sebbe's Avatar
Quote:
Originally Posted by Arcteryxxx View Post
Hmmm The sound of a 7x13 turning at 20k rpm

http://www.youtube.com/watch?v=sZb7n...&feature=g-upl
NOW we are talking...

OK, dont drag it.. what setup ? Amps ?

Im VERY intrested in this one, you know


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Blade MCP X - owner's thread rchelijc Micro Helis 13419 Jul 31, 2016 03:58 PM
Discussion MCP-X thread for people that dont have a MCP-x axelen Micro Helis 186 Apr 01, 2011 01:17 AM
Data mCP X (non chat) setup and tips owners thread Cable Guy Micro Helis 9 Mar 12, 2011 11:50 AM
Build Log Build Log - ARK X-500 series build thread cfrank2005 Electric Heli Talk 30 Jun 29, 2009 12:27 PM
RBC A-4 Skyhawk build thread X.X Willmsy Electric Ducted Fan Jet Talk 6 Nov 22, 2005 10:01 PM