Skyangel/HK Mig-15/29, F-86, T-45, F-15/16/18 and A-10 35mm EDF Jets now available! - Page 61 - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Aug 12, 2011, 06:46 AM
Team30 Micro EDF
NitroCharged's Avatar
Battery Eliminator Circuit - BEC ... means you don't need a separate battery to power your receiver with 5V.
Sign up now
to remove ads between posts
Aug 12, 2011, 07:04 AM
Life begins at transition
NC - what speed are you expecting?
If it's 100ish, that'll give my F16 a run for it's money - crazy!!
Aug 12, 2011, 07:14 AM
ancora imparo
jj604's Avatar
Yeh, and if I remember correctly you got slammed on the forums by some expert that proved theoretically that wouldn't work under any circumstances.

There's no sadder sight than to see a beautiful theory ravished by a gang of marauding facts...
Quote:
Originally Posted by NitroCharged
John, I also stack the regulator if I use more servo's so it doesn't fry. I simply solder another on top of the first to share the load.
Aug 12, 2011, 03:47 PM
Avionics tech
52Sabre's Avatar

Thank you!


Thanks for all the info and great advice you folks have provided me these past few weeks. You've got me back in the air (after 19 year absence) and have educated me about this new fangled world of electric R/C flight! 20 years ago the Goldberg Electra was about it with a heavy 2x6" brick of nicads. Wow! Times sure have changed. I look forward now (with confidence) to many enjoyable hours with the hobby. thank you again
Aug 12, 2011, 04:57 PM
Richard Cox
BEC is an acronym for Battery Eliminator Circuit. It is nothing more than a regulator in the ESC that supplies usually 5 volts for the receiver and servos. They usually only supply enough power for 2-3 servos, except in larger ESCs. Many times an external BEC is used to power the receiver and servos, since they can supply more current when needed.
A switching BEC, which most are, are much more efficient at converting the battery voltage to 5 volts without producing a lot of heat.
A BEC in an ESC will overheat and shut down if the power exceeds it's capability. When that happens, your receiver also loses power and bad things happen.
Aug 12, 2011, 11:10 PM
Team30 Micro EDF
NitroCharged's Avatar

Unofficial speed result for Mig 15 = 82.7mph!!!


Quote:
Originally Posted by Odysis
NC - what speed are you expecting?
If it's 100ish, that'll give my F16 a run for it's money - crazy!!
Odysis Dopplered me this morning at 82.7mph using the iphone rcspeedo app.

It took quite a few runs to get it as the fan is pretty quiet.

I'll do another run tomorrow morning on video for POF and Official Doppler readings.
Aug 12, 2011, 11:16 PM
I don't want to land yet!
Yup, she is very quick and quiet for such a small jet
Aug 13, 2011, 09:25 AM
Registered User
Hi guys!

Where can i get a new impeller? I found one at sydneyrcjets, but $7 + $35 for shipping is totally insane when the whole plane costs 50 bucks.
Aug 13, 2011, 03:27 PM
Avionics tech
52Sabre's Avatar
Zebb - same deal here. Hoping if we talk nicely to our Oz friends they'll slip a couple in an envelope. letter postage?
Aug 13, 2011, 03:45 PM
CV-15 VB-16
giuseppi's Avatar
I don't know of anyone more knowledgeable than Nitrocharged about small EDFs and he suggested a cut down GWS 40mm rotor as a replacement in this earlier post to chads:

https://www.rcgroups.com/forums/show...&postcount=486
Aug 13, 2011, 07:07 PM
oTc
oTc
Registered User
removed..
Last edited by oTc; Aug 13, 2011 at 07:32 PM. Reason: ...
Aug 13, 2011, 07:59 PM
For Sale-everything over 250 g
Quote:
Originally Posted by NitroCharged
Odysis Dopplered me this morning at 82.7mph using the iphone rcspeedo app.

It took quite a few runs to get it as the fan is pretty quiet.

I'll do another run tomorrow morning on video for POF and Official Doppler readings.
Very impressive, Dave!
Aug 13, 2011, 11:05 PM
Team30 Micro EDF
NitroCharged's Avatar
Quote:
Originally Posted by 52Sabre
Zebb - same deal here. Hoping if we talk nicely to our Oz friends they'll slip a couple in an envelope. letter postage?
Just waiting on a few other things to come into stock on the site before ordering up.


Thanks Mike.
Aug 14, 2011, 07:27 AM
Check your six
martys's Avatar

Mig 15


Just got one for my Birthday! Can't wait to fly her. Marty
Aug 14, 2011, 04:08 PM
Registered User
I will try to modify a GWS 40mm. I should be able to just machine it a little with a lathe at work.

How do i attach it to the motor? I cant see any threads on the impeller. Do i have to mill a hexagonal shape in the impeller and install a nut, or is there any other way to do it?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Mini Mig-15 EDF from Hobby King Dreamcatcher Foamy EDFs 6 Jan 16, 2012 10:58 AM
New Product JPower/Banana Hobby 40mm Foam Mig-15 and F-86 ducted fan Mikey 68 Micro EDF Jets and Power Systems 557 Aug 18, 2011 06:01 PM
Build Log Hobby King Micro A-6 & F-86 Jets tallflyer Foamy EDFs 4 Jun 04, 2011 03:05 PM
New Product J-Power 30mm EDF Jets (F-86 & Mig-15) xplaneguy Foamy EDFs 1 Jan 16, 2011 06:59 AM
Park/indoor EDF F-86 and MiG-15 production news! Thomas B Parkflyers 8 Feb 06, 2002 07:30 PM