Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Apr 10, 2012, 09:35 PM
giuseppi is offline
Find More Posts by giuseppi
CV-15 VB-16
giuseppi's Avatar
Hobby King received stock 35mm fans today. Also Red Arrows Hawk and F-86 parts.

Hurry Kids, while they last!

http://www.hobbyking.com/hobbyking/s...dProduct=18884

g
Sign up now
to remove ads between posts
Old Apr 10, 2012, 10:30 PM
NitroCharged is offline
Find More Posts by NitroCharged
Team30 Micro EDF
NitroCharged's Avatar
..and STILL no replacement 35mm Mig 15 canopy! ... someone needs a good face slappin' over there!
Old Apr 10, 2012, 10:41 PM
Jack Brewer is offline
Find More Posts by Jack Brewer
Registered User
The canopy in now, just listed them.
Old Apr 10, 2012, 10:50 PM
NitroCharged is offline
Find More Posts by NitroCharged
Team30 Micro EDF
NitroCharged's Avatar
where?
Old Apr 11, 2012, 03:28 PM
Joe 1320 is offline
Find More Posts by Joe 1320
Registered User
Joe 1320's Avatar
Finally got the launches nailed on the Mig-29. This thing is a nice floater.
kinda bounces on landings though. There's not much weight so no damage.

JPower Mig-29 35mm twin EDF (1 min 24 sec)
Old Apr 11, 2012, 03:49 PM
queadlunnrau is offline
Find More Posts by queadlunnrau
Luck is my skill
queadlunnrau's Avatar
Quote:
Originally Posted by miketre View Post
On my Mig, I'll be plugging the 2nd ESC into the rudder port of the 4CH Rx, so I'll have to mix it different mixing.
How did you end up setting up ur 4ch thrust mixing?

I have a dx7 like u and running the 415 in my F15
Old Apr 11, 2012, 07:06 PM
android78 is offline
Find More Posts by android78
Registered User
Quote:
Originally Posted by Joe 1320 View Post
Finally got the launches nailed on the Mig-29. This thing is a nice floater.
kinda bounces on landings though. There's not much weight so no damage.
Very nice.
To solve the bounce on landing, you could always try the vertical, nose first approach (lawn darts), but I believe that's not really recommended.
Old Apr 11, 2012, 09:56 PM
miketre is offline
Find More Posts by miketre
Mike
miketre's Avatar

Mig-29 throttle diff mix for a 4CH Rx (2nd ESC plugged in rudder port)


I had to use 4 mixes on my DX8. It can be turned off and on using the Mix switch.
I leave it off most of the time as I do not like how the plane flies with it on. Tried a few hammerheads and they looked ugly - definitely not as nice as the A-10 hammerheads.
Old Apr 12, 2012, 12:18 AM
queadlunnrau is offline
Find More Posts by queadlunnrau
Luck is my skill
queadlunnrau's Avatar
Thanks, yea I figured it might not be so good with the motors being so close, but I'm hoping it can help when I taxi, mine just goes in circles.
Old Apr 12, 2012, 02:01 PM
Joe 1320 is offline
Find More Posts by Joe 1320
Registered User
Joe 1320's Avatar
Anyone have any 35mm EDF motors from one of these jets left over? I have a few projects where I need the motors (fan too if you have it).

Old Apr 13, 2012, 11:31 PM
dude_109 is offline
Find More Posts by dude_109
Registered User
dude_109's Avatar
Joe,
What throttle setting did you use for that MiG toss?
Old Apr 14, 2012, 12:20 AM
j5cub is offline
Find More Posts by j5cub
Registered User
I have the mig and the sabre and use a 6amp esc with a 3 cell 11.1volt 250mah battery. The things just wouldn't fly on 2 cell but they are perfect on the bigger battery. You really need to dial down the rates. I think mine are in the 50-60% range with 25% expo. These are the coolest little jets and they will slow right down for a landing. I pretty much ran the sabre straight into a fence and only mushed the nose a little. It easily straigtens right up. Too bad that there aren't super micro retracts.
Old Apr 14, 2012, 05:52 PM
Como is offline
Find More Posts by Como
Registered User
Como's Avatar
I was just given the A10 for a birthday present. This will be my first nano, third plane ever. I have a Futaba transmitter and I am not sure what receiver I should purchase, or if any modifications need to be made because of possible polarity issues. There are not many post referencing Futaba in this thread.

Any help you can provide, I would greatly appreciate it.

Thanks,
Old Apr 14, 2012, 07:44 PM
Joe 1320 is offline
Find More Posts by Joe 1320
Registered User
Joe 1320's Avatar
Quote:
Originally Posted by Como View Post
I was just given the A10 for a birthday present. This will be my first nano, third plane ever. I have a Futaba transmitter and I am not sure what receiver I should purchase, or if any modifications need to be made because of possible polarity issues. There are not many post referencing Futaba in this thread.

Any help you can provide, I would greatly appreciate it.

Thanks,
If you are using 72mhz, here is the receiver you need:

http://www.bphobbies.com/view.asp?id...4&pid=C2680119
Old Apr 14, 2012, 07:46 PM
Joe 1320 is offline
Find More Posts by Joe 1320
Registered User
Joe 1320's Avatar
Quote:
Originally Posted by dude_109 View Post
Joe,
What throttle setting did you use for that MiG toss?
If I rember correct, around 2/3 throttle.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Mini Mig-15 EDF from Hobby King Dreamcatcher Foamy EDFs 6 Jan 16, 2012 10:58 AM
New Product JPower/Banana Hobby 40mm Foam Mig-15 and F-86 ducted fan Mikey 68 Micro EDF Jets and Power Systems 557 Aug 18, 2011 06:01 PM
Build Log Hobby King Micro A-6 & F-86 Jets tallflyer Foamy EDFs 4 Jun 04, 2011 03:05 PM
New Product J-Power 30mm EDF Jets (F-86 & Mig-15) xplaneguy Foamy EDFs 1 Jan 16, 2011 06:59 AM
Park/indoor EDF F-86 and MiG-15 production news! Thomas B Parkflyers 8 Feb 06, 2002 07:30 PM