MultiWiiCopter.com Scarab™ Airframes: Knife,FPV-Reconn,Vampire,Y-Siix,QuadOcta,Armour - Page 95 - RC Groups
Thread Tools
Mar 26, 2012, 09:50 PM
Registered User

LED lights


The design of the Y6 is slick and I can see the need for the LED deck to help orient the craft for the operator. Has anyone mounted the LED deck below the Y6 for greater visibility? If the Y6 is over 50 feet I can see problems see the lights for direction.

Steve
Sign up now
to remove ads between posts
Mar 27, 2012, 05:20 AM
Registered User
This castle is situated almost in the middle of Slovenia.

CrazyJ, I was flying without FPV or any other gear on the Scarab. So the weight was as low as possible.
Mar 27, 2012, 11:21 AM
SILURIA / UK
Shikra's Avatar
Nice vid Nejc. Well put together and some great angles. Your castles are very different to here too!

You looked real close to the wall at times - especially with R3 mode !! Brave... did you break any props?
I'm just too timid to fly close.
Mar 27, 2012, 11:31 AM
Registered User
Thanks, some were really close calls
No crashes for a couple of months now
Mar 27, 2012, 11:40 AM
SILURIA / UK
Shikra's Avatar
Done... !

Quote:
Originally Posted by quadslo
Can you post your videos also on the Scarab camera discussion topic : https://www.rcgroups.com/forums/show...1545638&page=9


Did anyone already try to fly Scarabs with the DJI?
Mar 27, 2012, 11:45 AM
Photograper
Bonson's Avatar
Hi, I'm pretty new to this, and I have a question about Paris (Triikopta) and Multiplex Cockpit SX.
It seems not possible to get as low as 1095 on the throttle stick, maybe wrong thread but I try...
Mar 27, 2012, 12:27 PM
Registered User
PubUltraStar's Avatar
Anyone have a US supplier of GWS 9050 propellers? Looks like everything I find online comes from China and the reviews are not great for these suppliers, or they take like 4 weeks to arrive. Also, the shipping charge from the MultiWiiCopter site is really high to the US, so I was hoping to find something stateside.
Mar 27, 2012, 12:48 PM
Registered User
Quote:
Originally Posted by PubUltraStar
Anyone have a US supplier of GWS 9050 propellers? Looks like everything I find online comes from China and the reviews are not great for these suppliers, or they take like 4 weeks to arrive. Also, the shipping charge from the MultiWiiCopter site is really high to the US, so I was hoping to find something stateside.
Inov8tive Designs has props for multicopters.

www.innov8tivedesigns.com
Mar 27, 2012, 01:35 PM
Registered User
PubUltraStar's Avatar
Quote:
Originally Posted by Edkirk
Inov8tive Designs has props for multicopters.

www.innov8tivedesigns.com
Thanks. I ordered a few of each and they were processed and already shipped the same day. Very much appreciated!

Update: Received 2 days later. Excellent turn around time.
Last edited by PubUltraStar; Mar 29, 2012 at 10:58 PM. Reason: Update to purchase at Inov8tive Designs
Mar 27, 2012, 01:45 PM
Registered User

3M Hex nuts


Anyone who needs 3M hex nuts, 3M 5X5 and 5X10 pan head slot Nylon hardware I have a hundred of each. I only needed a few but the nearby supplier only sold in hundred counts. If the count you need is covered by a couple of USPS stamps I will send them to you just for the asking.

Steve
Mar 27, 2012, 02:04 PM
Registered User
PubUltraStar's Avatar

Case?


Just thought I'd ask to see what others are using to transport/protect their MultiWiiCopters? Considering that these multi-copters don't really fit into standard cases, I decided I would build my own. I found a site called Reliable Hardware in the US that sells the parts necessary to custom build a protective case. If anyone is interested, I can post build pictures. Otherwise, I'd be interested in knowing what other store their copters in.

I think that I'll be able to customize the foam inside to also house my transmitter, batteries, etc. Although it's a bit pricey, I figured that I already spent a bunch on all of the equipment, might as well keep it safe/secure.
Mar 27, 2012, 02:12 PM
Registered User
I have a large wooden box to transport it in my car. It is quite bulky, but at least copter sits tight in the trunk
Mar 27, 2012, 03:11 PM
SILURIA / UK
Shikra's Avatar
I could tell!!
I had 2 within a couple of days. Unlucky with some duff batteries - bad connections came apart inside.
Real lucky on the copter - just dropped straight down onto the carriage. Minor damage. Replaced one boom which cracked. I

Quote:
Originally Posted by quadslo
Thanks, some were really close calls
No crashes for a couple of months now
Mar 27, 2012, 03:16 PM
SILURIA / UK
Shikra's Avatar
Quote:
Originally Posted by Bonson
Hi, I'm pretty new to this, and I have a question about Paris (Triikopta) and Multiplex Cockpit SX.
It seems not possible to get as low as 1095 on the throttle stick, maybe wrong thread but I try...
If GUI confirms that, increase this to 5 higher than your lowest.
#define MINCHECK 1100 in the main file - not config
Should also reduce MAXCHECK by same amount
Mar 27, 2012, 03:49 PM
Photograper
Bonson's Avatar
Quote:
Originally Posted by Shikra
If GUI confirms that, increase this to 5 higher than your lowest.
#define MINCHECK 1100 in the main file - not config
Should also reduce MAXCHECK by same amount
But - if I set down the trim 5 steps I reach 1095, is that ok not to have the trim in neutral?

I'm not sure about what you mean I should change?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log Twisted Hobbys - Telink 43" SU 29 - Build, Fly, Vid hercdriver7777 3D Foamies 635 Oct 27, 2017 10:37 AM
Discussion Radical RC Stick 400 Build Thread~~~Now with Video Carnifax Electric Plane Talk 186 Aug 20, 2014 09:55 PM
Question Skywalker 3 Build Advice and Eventual Build Thread! Ecibob FPV Talk 2 May 01, 2011 05:46 PM
Discussion Easyglider Build Thread (Help wanted) worzul Foamies (Kits) 2 Mar 18, 2011 08:45 AM