Herr Mini-Sport - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Oct 18, 2001, 11:24 AM
Registered User

Herr Mini-Sport

Finished the Mini-Sport this morning. Thought you guys may want to see what it looks like. I've modified it to have ailerons and moved the landing gear from the wing to the fuselage. Haven't flown it yet, but it is powered by an Astro 010 with 6x250AAA NiCds.
Sign up now
to remove ads between posts
Oct 18, 2001, 02:00 PM
Registered User
Hi Jeff,

My Mini-sport is on the bench with both wings framed up and the fus. 90% done. I'm also going the use the Astro 10 in mine.

Your little birdy looks way cool! What did you cover it with? I've been a little concerned that the instructions called for Monocote, which seems too heavy for this application. On the other hand, Monocote will stengthin the wing, while other coverings do not.

Please post a flight report when you can.

Best Regards, Mickydee
Oct 22, 2001, 11:47 AM
Registered User

Flight Report

Got to fly the mini-sport this weekend. With 6x350 cells on Astro 010, it flies nicely. Will loop from level flight at start of flight, but drags a bit towards the end of the flight. Probably put an extra cell into it for this weekend. The aileron modification is definately needed IMHO. I tried flying around on just rudder and elevator; had a hard time to get it to turn. It turns and rolls very nicely on ailerons.

The kit is very easy to build and took about a week of evenings. Covered in Monokote on the wings and ultracote lite on the fuselage.
Oct 23, 2001, 09:09 AM
Registered User

Would like some suggestions?

Jeff.. post is kind of old.. but hopefully your still watiching.. I've just started a mini-sport kit and was disappointed that it was only rudder/elevator.. somehow I thought it was aerilons also.. I'm planning on modifiing it to aerilons/elevator.. question.. did you just cut into the trailing wing or add on to existing wing.. ?? what size did you do the aerilons" about 1" by 2/3rds of wing length.. and what about throw size.. about 1/2 inch both ways..?
As you can see,, I'm realy interested in what you did.. cause I'm planning on doing this right from the beginning.. any suggestions/info you have would be appreciated.. thanks JoeG

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Herr Mini Sport 35.75'' lla Aircraft - Electric - Airplanes (FS/W) 1 Jan 28, 2017 07:10 AM
Discussion Herr Mini Sport V Tail-- Mini V Sportster MustangAce17 Parkflyers 11 Sep 30, 2009 04:39 PM
Herr Mini-sport russ6421 Parkflyers 7 Sep 06, 2001 09:14 PM
Herr Mini Sport - Speed 280, Laser Cut Kit hoppy Electric Plane Talk 19 Jul 29, 2001 12:43 PM
Herr Mini Sport info Dauntae Electric Plane Talk 0 Jul 03, 2001 09:38 AM