Originally Posted by CX2X3
Thanks for the reply, I will try that.. just one more question please.. I see the 5.5e board doesn't have a BootLoader switch like the one in the vid .. is there another way to "switch" it to programming mode, or is it automatically gonna sense the serial cable?
Basically the switch is to cut off the connection of Ail RX line. We have the switch there so if user has the RX connected, you dont need to unplug the cable and just use the switch to disconnect the connection.
we removed it as some user may forgot to switch on and end up with no Ail control. Something with good intend but not that well receive.
for 5.5e, if you have RX cable inserted, just need to remove the Ail cable before you use the flashtool.