New Hobbyking Jet - Stinger 64 - Page 60 - RC Groups
Thread Tools
Nov 27, 2011, 10:25 AM
Suspended Account
it will fit but i dont know if it will be ienough ''stand off'' we need some numbers for that or an actual fit test
Sign up now
to remove ads between posts
Nov 29, 2011, 09:39 AM
Youtube Johnbrum26
Quote:
Originally Posted by tdab
I run Don's standard "cool" 4000 on 4s and it goes like hell. I run this one so I can use a 45A ESC and lower "C" lipos. Probably not 90 mph, but close. You can run it on 3s too and it should be quicker than the stock system.
what size 4s are you using?
Nov 29, 2011, 09:40 AM
Youtube Johnbrum26
Quote:
Originally Posted by pavcon
it will still be just fine.
it's a very well balanced rotor.. never had probs withhets and I have 3 70mm and one 90mm
also i have the edo stand off for the wicked motor will that work with that unit?
Nov 29, 2011, 03:28 PM
Suspended Account
Quote:
Originally Posted by Killab
also i have the edo stand off for the wicked motor will that work with that unit?
I can't answer for sure but 99.9% yes.

I'm waiting for giantcod to give me price and ETA. I prefer to get my stuff from europe as much as I can
Nov 29, 2011, 03:56 PM
t = Col Frank Fitts
tdab's Avatar
Quote:
Originally Posted by Killab
what size 4s are you using?
4s 2350 25c..The thin ones...Tom
Nov 29, 2011, 05:26 PM
Youtube Johnbrum26
Quote:
Originally Posted by tdab
4s 2350 25c..The thin ones...Tom
Are those hobbyking batteries
Nov 29, 2011, 05:38 PM
t = Col Frank Fitts
tdab's Avatar
Quote:
Originally Posted by Killab
Are those hobbyking batteries
Yes they are. Here is the link below. I have about 6 or 8 of these and they have been rock solid for me up to 45A continuous.

http://www.hobbyking.com/hobbyking/s...poly_Pack.html
Nov 30, 2011, 12:35 AM
Youtube Johnbrum26
How does it balance out with that heavier pack? Also what esc are you using I'm running a eflite 40 amp right now.
Nov 30, 2011, 12:59 AM
I don't want to land yet!
Balances ok with 4s 2650mAh 50-90c... Shoved as far back in the canopy area
Nov 30, 2011, 02:48 AM
Registered User
Hope to get it to balance with a 4s 3000 40c when my stinger arrives.
Might need a little foam removal and strategic placement of the 80A plush esc
Nov 30, 2011, 03:13 AM
Suspended Account
Quote:
Originally Posted by jim350
Hope to get it to balance with a 4s 3000 40c when my stinger arrives.
Might need a little foam removal and strategic placement of the 80A plush esc
won't be possible..
I placed the ESC rigt infront of the EDF unit and used a heavier motor.. a 2200mah was just balancing pushed all the way back. .. ofcourse it was a heavy 2200mah but how light can a 3000mah be?
Nov 30, 2011, 03:29 AM
Registered User
360g actually 40g heavier than a 2650
I will make it balance. Stay tuned, hopefully it will arrive in time for the weekend
Nov 30, 2011, 04:56 AM
I don't want to land yet!
Yep it will balance out one way or another... my motor is heavier than the stock one too!
Nov 30, 2011, 05:39 AM
Registered User
good point Dave.
my motor weighs 95g as opposed to the stock motor @ 52g
Nov 30, 2011, 05:56 AM
I don't want to land yet!
Yeah and it's not exactly where the original was positioned either... easy to move it back a little then you can load up the bigger battery to balance it, is it gonna be ready for the weekend Jim?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product New HobbyKing Viper Jet 70mm Fibreglass Jet Jagzilla Electric Ducted Fan Jet Talk 1591 Sep 05, 2016 07:48 PM
Discussion Stinger F3B/F3F Vaclavs new weapon! SpeedMaster Multi Task F3X 124 Aug 08, 2013 10:00 PM
For Sale Nib sr71 64 mm ducted fan jet yf22raptor Aircraft - Electric - Jets (FS/W) 6 Mar 26, 2011 03:28 PM
Discussion HobbyKing EDF 64 Identification liam2317 Electric Ducted Fan Jet Talk 11 Dec 20, 2009 08:52 AM