Weird Problem with new Hacker X-7 Pro ESC
Just bought a new Hacker X-7 and A10-9L for my first foamy 3D. I've been flying electrics for about 3 years and have about 10 aircraft, so I have a bit of knowledge of how these things should work.
Heres the deal: When I plug in the battery, the esc will not arm, or work, unless I push one of the control surfaces at least 50%, then it will arm. The throttle won't work however, unless you do the same thing, just no response otherwise. So imagine you have to hold the rudder over to get the throttle to function. If you unplug all servos...no esc response.
I did some testing: tried two different transmitters and two different receivers; No go. Both receivers work fine in another aircraft. The battery voltage is fine. All servos (hitec 45's) work fine. All new electronics.
Looks like a bad esc to me, what do you think???
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|For Sale||Hacker x-55 sb PRO esc brand new||bryce88||Aircraft - Electric - Power Systems (FS/W)||1||Jul 30, 2011 10:48 PM|
|For Sale||Hacker X-70 opto-Pro ESC & X-Pro interface||Fast Fly||Aircraft - Electric - Power Systems (FS/W)||0||Apr 21, 2011 07:47 PM|
|Discussion||Hacker X-7 Pro ESC Question||PGR||Power Systems||1||Apr 02, 2011 10:24 AM|
|For Sale||Hacker X-70 opto-Pro ESC & X-Pro interface||Fast Fly||Aircraft - Electric - Power Systems (FS/W)||4||Mar 17, 2011 12:06 PM|
|Sold||Hacker A10-9l and Hacker X-7 esc||cjdscratch||Aircraft - Electric - Power Systems (FS/W)||1||Mar 12, 2011 12:47 PM|