Arduino Pro Mini 328-5V/16MHz - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
May 15, 2011, 10:35 PM
Registered User
Help!

Arduino Pro Mini 328-5V/16MHz


My pro Mini does not flash the green LED rapidly after I upload the the MultiWii_1_6.pde. Also, I can not start the configurator screen in the MultiConif_1_6 I thimk these problems are associated with the port settings in my Windows XP computer. I set the bit rate at 115200 bits/sec, but that didn't help. Can anyone tell me what other port settings I should use?
I am using a SparhFun DEV-10008 breakout board and a USB cable from the Pro Mini to the Windows computer.
Sign up now
to remove ads between posts
May 15, 2011, 10:41 PM
Registered User
RCvertt's Avatar
Quote:
Originally Posted by Donald Rose
My pro Mini does not flash the green LED rapidly after I upload the the MultiWii_1_6.pde. Also, I can not start the configurator screen in the MultiConif_1_6 I thimk these problems are associated with the port settings in my Windows XP computer. I set the bit rate at 115200 bits/sec, but that didn't help. Can anyone tell me what other port settings I should use?
I am using a SparhFun DEV-10008 breakout board and a USB cable from the Pro Mini to the Windows computer.
Can you load the blink sketch?

If you get that working then you need at least 1.7final code version.
May 15, 2011, 11:51 PM
Registered User
Rvertt
I can load the blink O.K. and it works. When I try to start the confirurator in the MultiConif_1_6, the breakout board keeps blinking red and doesn't stop. Also the tricopter y image doesn't come onto the screen. I understood that the 1.6 version was more reliable that the 1.7 at this time.
May 15, 2011, 11:57 PM
Registered User
RCvertt's Avatar
Quote:
Originally Posted by Donald Rose
Rvertt
I can load the blink O.K. and it works. When I try to start the confirurator in the MultiConif_1_6, the breakout board keeps blinking red and doesn't stop. Also the tricopter y image doesn't come onto the screen. I understood that the 1.6 version was more reliable that the 1.7 at this time.
Don't know. I only played with 1.7pre and MultiWiiV1_7 with no problems.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion 5.5 īnch arduino pro mini mini michel pet Multirotor Drone Talk 2 Apr 15, 2011 11:58 AM
Discussion Arduino Pro Mini servo controller cdi3d Multirotor Drone Talk 5 Apr 03, 2011 11:59 AM
Help! Need help making adapter board Arduino Pro Mini/FF IMU Edwardo5000 Multirotor Drone Talk 7 Mar 24, 2011 04:04 PM
Question Wemotec Mini Pro...spinner required? FNFAL Electric Ducted Fan Jet Talk 9 Mar 11, 2011 07:58 AM
Help! Arduino pro mini - 3.3v or 5v termhn Multirotor Drone Talk 4 Jan 11, 2011 09:05 AM