Thread Tools
May 13, 2011, 06:19 PM
Crikey never leave beer behind
steve wenban's Avatar
Build Log

82" CAC Boomerang


With all the slope fests going on and being able to actually head to the US in 2013 its time to start planning for the aircraft to take to the ISR's PSS fest then. so I've started drawing up the Boomerang .Originally I was thinking 60 "
but for some reason I end up designing bigger out of force of habit. So heres a sneak peek ,I'm using an RG1410 on this one.
Last edited by steve wenban; Mar 05, 2012 at 03:46 PM.
Sign up now
to remove ads between posts
May 14, 2011, 05:42 AM
Just Toss It !!!
MATIN's Avatar
You're checking the size with Qantas aren't you?

Matin
May 14, 2011, 05:46 AM
Crikey never leave beer behind
steve wenban's Avatar
I saw the boxes that Sean and Andrew took over this should fit easy plus extras packed around it
looking at the flap setup this thing will be a 6 servo wing . And a possible 5 piece wing
Last edited by steve wenban; May 14, 2011 at 06:24 AM.
May 14, 2011, 10:31 AM
Good, fast or cheap, pick two
robh's Avatar
Oh this is going to be awesome to watch!
May 14, 2011, 12:26 PM
Just Toss It !!!
MATIN's Avatar
Quote:
Originally Posted by steve wenban View Post
............ this thing will be a 6 servo wing . And a possible 5 piece wing
...........and a three-piece tail.

Matin
May 14, 2011, 05:08 PM
Crikey never leave beer behind
steve wenban's Avatar
Actually with what I have planned it will fit in a 1.5mtr x 600mm x 600mm crate, thats leaves the fin and stab attached with extra storage around the sides for extra planes .
But I talk to Sean in September and get the size of box he used which I think looked a lot bigger than what I have planned
May 14, 2011, 05:26 PM
Crikey never leave beer behind
steve wenban's Avatar
Actually,thinking about what you said Matin a 3 piece fin a stab setup would not be that hard to achieve ,the 5 piece wing will be easy and I'll sit down and do some drawing work on the tail end, I have some ideas to make it work .
Oct 09, 2011, 05:01 PM
Crikey never leave beer behind
steve wenban's Avatar
David reminded me of the start of this thread but as House reno's and work shop extension
taking up building time it will take a while to kick this off as a build thread
Oct 09, 2011, 07:36 PM
No fuse too fat
slopeiron's Avatar
Nice subject, Steve! So many cool planes and so little time.
Oct 10, 2011, 03:49 AM
Registered User
Steve

I have some photos of a Boomerang that drops into Rutherford if you are interested.

No top photos. Both sides etc.

Let me know.

Cheers jq
Oct 10, 2011, 08:17 AM
Registered User
TFLG's Avatar
That one's gonna take some lead to balance it
Oct 10, 2011, 12:02 PM
Crikey never leave beer behind
steve wenban's Avatar

Lead


Quote:
Originally Posted by TFLG View Post
That one's gonna take some lead to balance it
Dont they all just some a little more than others Bearcat only took 8 lbs lol
Oct 15, 2011, 01:03 AM
Crikey never leave beer behind
steve wenban's Avatar
What the hell's going on ,you know how Bill lost some of his bits to the Dauntless, Well at least he had the model well underway ,I cant find the damn drawings I did for the Boomerang ARRRGGGGGHHHH!!!!!!
Oct 21, 2011, 02:35 AM
Crikey never leave beer behind
steve wenban's Avatar

And so it begins again


Finally found my drawings hidden behind the resin cabinet
Oh well did a lot of head scratching on what way to build this bird ,I finally thought I'd let the wood tell me how it want to go together so I went old school on it. Started with a simple profile and added formers used a little 1/4" at the tail end for some strength and then 1/8 for the rest ,1/8 ply root support and the forward bulkheads will be 1/8" ply except for the very front of the cowl which I'm going to build up as a hollow and build lead into it for a start rather try to stuff it all in later .It wont be enough to balance it but i wont have to stick as much into the front if I build in in the first place if you know what I mean
anyway took some shots to let you see what I'm up to not much to look at yet though
Oct 21, 2011, 02:38 AM
Ninja Master
BigSwede's Avatar
Alright! It has begun! Looking forward to seeing it come together Steve.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Help! where to find a cac boomerang trumps Australia 81 Mar 12, 2010 09:44 PM
Discussion new CAC boomerang maiden vid trumps Australia 6 Nov 23, 2008 02:42 AM
Sold EPP Boomerang Combat Wing - Including MG Servos $75 marshall5686 Aircraft - Sailplanes (FS/W) 4 Apr 27, 2008 02:45 PM
Question CAC-13 "Boomerang" construction article. old man emu Australia 6 Dec 24, 2006 07:44 PM
Question CAC-13 "Boomerang" question old man emu Australia 6 Nov 30, 2006 03:36 AM