Thread Tools
Old Nov 06, 2012, 02:06 PM
ro.bi. is offline
Find More Posts by ro.bi.
... where is it ?!
ro.bi.'s Avatar
Thanks Doc! 
By trial-and-error, with big help from a local RC member, we found out the signal wire to the ESCs was somehow inverted on the plugs? Purchased the same 18A Turnigy Plush (red) ESCs as my Witespy originally had, but who knows? 
Forced them in the other way and it works now. =) 
Only fried my brand new ESC programming board in the process (used the 12V lipo) ...

Quote:
Originally Posted by DoctorAudio View Post
could be several things?
Calibrate them all!
Lower your mini throttle, in the sketch.
Check your throttle trim!
looking at the video, try the min command first!
Lower it to 900 and see if that works.
If you look real close they are all beeping!
Start there!
Sign up now
to remove ads between posts
Old Nov 06, 2012, 02:58 PM
Creepin22 is offline
Find More Posts by Creepin22
Registered User
Quote:
Originally Posted by ro.bi. View Post
Only fried my brand new ESC programming board in the process (used the 12V lipo) ...
Better that then something major on the quad! Like the FC!
Old Nov 06, 2012, 06:05 PM
DoctorAudio is offline
Find More Posts by DoctorAudio
Some call me the other guy!
DoctorAudio's Avatar
Yep like Creepin22 said!
happy you got it!
now go fly!
Quote:
Originally Posted by ro.bi. View Post
Thanks Doc! 
By trial-and-error, with big help from a local RC member, we found out the signal wire to the ESCs was somehow inverted on the plugs? Purchased the same 18A Turnigy Plush (red) ESCs as my Witespy originally had, but who knows? 
Forced them in the other way and it works now. =) 
Only fried my brand new ESC programming board in the process (used the 12V lipo) ...
Old Nov 11, 2012, 03:03 PM
DoctorAudio is offline
Find More Posts by DoctorAudio
Some call me the other guy!
DoctorAudio's Avatar
Quadrino & MultiWii 101

FlyingEinstein will be hosting a webex class each Sunday @ 3PM EST for an introduction to wiring the Quadrino and initial installation and configuration of the MultiWii Configuration software. This is a group discussion and a Question and Answer period will follow and asking questions during the webex is also encouraged. If you are having difficulties with setting up the Quadrino this is your chance to get your questions answered and your quad flying.

This class is offered through Cisco WebEx and supports up to 50 attendees at a time. To join the meeting goto flyingeinstein.webex.com between 2:45 PM and 3:00PM EST. The meeting will open at 2:45PM but will not begin until 3PM.

Password is always "quad"

Go to flyingeinstein.webex.com

Webex is a Cisco product for online group meetings and presentations. If you haven't already done so, your browser will prompt you to install the webex browser plugin. There is no spam, spyware or adware in the Cisco webex product. Cisco is the leading supplier of computer network related products.
Old Nov 11, 2012, 03:39 PM
DoctorAudio is offline
Find More Posts by DoctorAudio
Some call me the other guy!
DoctorAudio's Avatar
Okay guys here is a couple things if you don't have them your going to need this to uplaod a new update for the GPS module.

https://www.sparkfun.com/products/9716

HobbyKing same part is this

http://www.hobbyking.com/hobbyking/s...roller_5V.html
Old Nov 11, 2012, 05:44 PM
kevinjulieevan is offline
Find More Posts by kevinjulieevan
Registered User
kevinjulieevan's Avatar
yep i'd say lower your min throttle command also. worked for me!

Quote:
Originally Posted by ro.bi. View Post
Hey guys, Doc,
Got some new Turnigy ESCs to replace the beaten-up ones in my Witespy quad (same red Plush ones) & something seems to be wrong: when I plug in the battery I get the "tu-da-de" chirp but then, instead of all the ESCs beeping one more time together, the front-left one beeps first (a few times, ~1sec interval) then the other 3 together a second later - and it keeps doing that.
The order is correct ... what else can it be? Thanks
http://youtu.be/_yhZyf8ICJk
RCG Plus Member
Old Nov 11, 2012, 06:15 PM
ro.bi. is offline
Find More Posts by ro.bi.
... where is it ?!
ro.bi.'s Avatar
Quote:
Originally Posted by kevinjulieevan View Post
yep i'd say lower your min throttle command also. worked for me!
Thanks but we solved (https://www.rcgroups.com/forums/show...postcount=5176) that.
Old Nov 11, 2012, 09:46 PM
witespy is offline
Find More Posts by witespy
Registered User
Quote:
Originally Posted by DoctorAudio View Post
Okay guys here is a couple things if you don't have them your going to need this to uplaod a new update for the GPS module.witespyquad.gostorego.com/flight-controllers/cp2102-usb-adapter.html

https://www.sparkfun.com/products/9716

HobbyKing same part is this

http://www.hobbyking.com/hobbyking/s...roller_5V.html
I have this part on my website for $5 http://www.witespyquad.gostorego.com...b-adapter.html
Old Nov 11, 2012, 11:42 PM
rernewe is offline
Find More Posts by rernewe
Registered User

ok who's witespy quad is the oldest?


i got mine pre-quadrino so i got one of these units included with mine.

Quote:
Originally Posted by witespy View Post
I have this part on my website for $5 http://www.witespyquad.gostorego.com...b-adapter.html
Old Nov 14, 2012, 01:04 AM
Airplanekid333 is offline
Find More Posts by Airplanekid333
"Every boy has a dream to fly"
Airplanekid333's Avatar
http://www.youtube.com/watch?feature...&v=TTC3vPSwXFs
I need new motors and props! my crappy no brand name 1000kv and perfectly balanced gemfans is making my video look like crap. any suggestions or recommendations on a new setup? Christmas is coming soon, hopefully i can get some goodies. new motors new batteries and the GPS.
Old Nov 14, 2012, 04:45 AM
DoctorAudio is offline
Find More Posts by DoctorAudio
Some call me the other guy!
DoctorAudio's Avatar
try doing that without out props.
Then with only one motor.
Then move it to the next.
that will give you more info!
Old Nov 14, 2012, 08:17 PM
Airplanekid333 is offline
Find More Posts by Airplanekid333
"Every boy has a dream to fly"
Airplanekid333's Avatar
This is interesting, it must be my poor quality motor adapters. With out them it is fine and with it on it vibrates.
Still want to get new motors though, i prefer to stay under 20 amps and from hobbyking. Ill take any suggestions.

SO EXCITED FOR THIS GPS MODULE!!!
Old Nov 16, 2012, 08:02 PM
DoctorAudio is offline
Find More Posts by DoctorAudio
Some call me the other guy!
DoctorAudio's Avatar
Flip this! (8 min 49 sec)



Flip this #1 (9 min 30 sec)
Last edited by DoctorAudio; Nov 17, 2012 at 02:29 AM.
Old Nov 18, 2012, 01:45 PM
DoctorAudio is offline
Find More Posts by DoctorAudio
Some call me the other guy!
DoctorAudio's Avatar
Quadrino & MultiWii 101

FlyingEinstein will be hosting a webex class each Sunday @ 3PM EST for an introduction to wiring the Quadrino and initial installation and configuration of the MultiWii Configuration software. This is a group discussion and a Question and Answer period will follow and asking questions during the webex is also encouraged. If you are having difficulties with setting up the Quadrino this is your chance to get your questions answered and your quad flying.

This class is offered through Cisco WebEx and supports up to 50 attendees at a time. To join the meeting goto flyingeinstein.webex.com between 2:45 PM and 3:00PM EST. The meeting will open at 2:45PM but will not begin until 3PM.

Password is always "quad"

Go to flyingeinstein.webex.com

Webex is a Cisco product for online group meetings and presentations. If you haven't already done so, your browser will prompt you to install the webex browser plugin. There is no spam, spyware or adware in the Cisco webex product. Cisco is the leading supplier of computer network related products.
Old Nov 18, 2012, 02:08 PM
DoctorAudio is offline
Find More Posts by DoctorAudio
Some call me the other guy!
DoctorAudio's Avatar
We will be having discussions on FPV Setup.
Cameras
Ferquency
and all the stuff you need

Motors:
Power
Size
Battery voltage

Props

Different type of setups.
Different flying styles
How to smooth out video jello
I hope you will come and share the info you have learned!
I want to help you save money and also have to best time you can flying!
Thanks guys and girls and se you in Webex soon!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Article Hangar 9's Piper J-3 Cub 40 Plug-N-Play PNP Plug N Play Evo 46NT Powered ARF Review tailskid2 Scale Fuel Planes 13 Oct 09, 2016 05:15 PM
Help! need new flight controller recommendations n3m1s1s Multirotor Talk 115 Jan 09, 2012 10:38 AM
Article Subsonic's Motrolfly Plug and Play Power System: Motor, Controller & Battery Review Michael Heer Power Systems 27 Dec 16, 2010 01:36 PM
Data Plug 'n Play separates: An Esky CP2 with an E-flight 2 in 1... elan Micro Helis 3 Mar 19, 2010 09:51 AM
Discussion Air Hogs Plug n'Play Flight Deck Simulator trust416 Micro Ready-to-Fly 14 Aug 05, 2007 11:44 AM