Quadrino Multiwii Flight controller - Page 301 - RC Groups
Thread Tools
Aug 12, 2012, 03:05 PM
Registered User
huskerfreak's Avatar
whats the webex meeting number
Sign up now
to remove ads between posts
Aug 12, 2012, 10:56 PM
Registered User
Go Big Red
Meetings are every Sunday from what I can tell at 3:00 EST. Goto the frankenstien site which has a link to the webex meeting. Pass word is quad.
They are very helpfull.
Aug 12, 2012, 11:03 PM
Registered User
Ok
The webinar was great, but now I need help tuning the pid loop. Straight off the flash the copter was oscilating. So I turned down the P on the roll and pitch. I turned it down to the point where the oscilation is gone. Now the problem is when it starts to roll right and I adjust slightly with the alieron in the opposite direction the thing way over corrects and basicly flips. Any good guides to adjusting the PID loops.
Thanks a Bunch
Shawn
Aug 12, 2012, 11:05 PM
Some call me the other guy!
DoctorAudio's Avatar
There is a couple tutorials on witespy.com and quadrino site.
I am at the field helping someone with two quads.


Quote:
Originally Posted by shawn1979
Ok
The webinar was great, but now I need help tuning the pid loop. Straight off the flash the copter was oscilating. So I turned down the P on the roll and pitch. I turned it down to the point where the oscilation is gone. Now the problem is when it starts to roll right and I adjust slightly with the alieron in the opposite direction the thing way over corrects and basicly flips. Any good guides to adjusting the PID loops.
Thanks a Bunch
Shawn
Aug 13, 2012, 10:28 AM
Registered User
GPS + Quadrino =
i recived the flytron navigator board today.

managed to wire it up and "table" test it.

looks ok and i'm getting a quick + good fix inside the house !!

i'll install it on the quad and get the bird up and running for the weekend test
Aug 13, 2012, 11:58 AM
Some call me the other guy!
DoctorAudio's Avatar
Good work there!
Aug 13, 2012, 01:22 PM
Registered User
So jealous......
Aug 13, 2012, 03:24 PM
Some call me the other guy!
DoctorAudio's Avatar
Quote:
Originally Posted by Atown93
So jealous......
Shush, man.
Me too!
Aug 13, 2012, 03:52 PM
Registered User
LoL

i found another one , that you guys might be interested in ,,,
it a i2c gps + a mag on one board .

http://www.multiwiicopter.com/produc...multiwiicopter
Aug 13, 2012, 03:56 PM
James not bond
jy0933's Avatar
they just cost too much
i personally prefer these
http://www.rctimer.com/index.php?gOo...wt&goodsid=762
http://www.rctimer.com/index.php?gOo...wt&goodsid=763
half price, same effect, a bit work
Aug 13, 2012, 04:40 PM
Registered User
Got the OLED working, still can't get it to just hop from one screen to another. I want to see the vbat stats when I'm in the air.

Extra board,crystals and BT module arrived today. I'll be heating up my soldering station tonight and upload some pics.

I have one question for Colin. When we were discussing the GPS units on Sunday, you mentioned that the one you are prototyping has a baro on board.

I've seen some GPS modules with mags but never boro. Can you clarify?
Aug 13, 2012, 11:00 PM
Registered User
huskerfreak's Avatar
Quote:
Originally Posted by shawn1979
Go Big Red
Meetings are every Sunday from what I can tell at 3:00 EST. Goto the frankenstien site which has a link to the webex meeting. Pass word is quad.
They are very helpfull.
Hey there Shawn we may have to try and meet up sometime since we both live here in Lincoln. The only reason I didn't send you a pm with this message is that I read earlier you didn't know how to use that feature yet.

I enjoyed listening in on the webex on Sunday I wish I could stay for most but I was busy with my kids while the wife was out and about so I was multi tasking at the time maybe next Sunday I will join in as I understand the most part of setting up my quad but I just can't get the settings that I am totally looking for. I want super smooth easy to fly picture taking kind of flying. If I use the fpv it will only be to preview what I am taking a pic of or video no goggles thing.
Aug 14, 2012, 01:28 AM
Registered User
OK so something odd about the BT unit. I followed the instructions online and hooked everything up on one of the two units I bought. After pairing it with my tab I could get into the application just fine so I figured it all worked swimming and moved to install on the other zoom board.

I tried go actually go in and do the setup on the new board (after flashing the appropriate firmware with the usb) I can pair and the app sees the board because the light goes solid. That's as far as I can go..... I try to read anything through the BT and nothing. I left it there connected to my tab and then my phone for 20 min or so each and nothing.

I checked and rechecked my cabling and everything is correct. I even swapped the tx and rx just to see if that worked...

I went back to the old board and got the same result. Am I missing something?
Aug 14, 2012, 01:51 AM
Registered User
Does it matter that the device is called linvor instead of witespy as the instructions state? Is something not configured in them?
Aug 14, 2012, 02:10 AM
Some call me the other guy!
DoctorAudio's Avatar
I thought it read witespy


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Article Hangar 9's Piper J-3 Cub 40 Plug-N-Play PNP Plug N Play Evo 46NT Powered ARF Review tailskid2 Scale Fuel Planes 15 Sep 07, 2017 10:50 PM
Help! need new flight controller recommendations n3m1s1s Multirotor Drone Talk 115 Jan 09, 2012 10:38 AM
Article Subsonic's Motrolfly Plug and Play Power System: Motor, Controller & Battery Review Michael Heer Power Systems 27 Dec 16, 2010 01:36 PM
Data Plug 'n Play separates: An Esky CP2 with an E-flight 2 in 1... elan Micro Helis 3 Mar 19, 2010 09:51 AM
Discussion Air Hogs Plug n'Play Flight Deck Simulator trust416 Micro Ready-to-Fly 14 Aug 05, 2007 11:44 AM