May 20, 2011, 11:45 AM
Did you get it on video?
Flying-Monkey's Avatar
Quote:
Originally Posted by daign View Post
wow. what a wanker
Now, to keep this in context, during the conversation, he didn't let on he was offended. I left it thinking he was a great guy, who I had a bit in common with. I had joked with him, as I would my friends at the field. Unfortunately, maybe due to the nuances of internet conversations versus face to face comments, it was taken the wrong way.

Had it been mentioned at the time that the intended ribbing was not welcome, I wouldn't have continued.

I apologized to mr seadog, for this misunderstanding, and thought it would be left at that.

I will be more careful with how I joke with people in the future due to this.
Last edited by Flying-Monkey; May 20, 2011 at 12:01 PM.
Sign up now
to remove ads between posts
May 20, 2011, 01:55 PM
'FPV'er...not a "LOS'er
Vantasstic's Avatar
Quote:
Originally Posted by djdavid60 View Post
Van,

I built a T-Copter from Tim's (troynh) design on his thread. There's dimensions and diagrams and a lot of info. A T variation is great if you are looking to do some GoPro video with it. Judging from your posts on many threads that I read, you seem to be into taking video and FPV. If you want a great camera platform, the T-Copter places the camera far enough forward to keep the props out of the video. Anyway, here is a link to Tim's thread:

https://www.rcgroups.com/forums/show....php?t=1314483

My T-Copter is a very stable flier. Here's my last recorded flight with the T-Copter from Tim's design. SHortly after this flight, one of my ESCs developed a problem. I just got the replacement ESCs due to them being on backorder. I should be back in the air this weekend.

http://www.youtube.com/watch?v=b11FIOZtWJA

I can't wait to get the Quadrino going in the Quad I'm designing.

Doug
Thanks for the T-copter information. I'll take a look into that thread.
May 20, 2011, 02:14 PM
If it flies, I can crash it!
djdavid60's Avatar
I have a shiny new Quadrino ADV in my hands!!!!

Doug
May 20, 2011, 03:13 PM
Registered User

Calibration


Are you guys doing a calibration procedure for sensors at the start of each flight?

I never once calibrated my WMP only warthox board by moving the sticks as shown in some directions. It was my impression Alex does it in the code startup so its important to boot the code on a level surface.
May 20, 2011, 08:50 PM
Registered User
Tony97's Avatar

Quadrino Board Question


I have a Witespy quad and love it. I thought I would build one myself to better learn how they work. Figured if I can build one from scratch....I can upgrade the board on my Witespy quad. Anyway, built one and like it but I was hoping for some help on a few questions.

1. Look at my screen shot of my GUI. I had to lower PID this much to get it to feel like my Witespy Quad with 3.2 settings. Very little wobble now at a good forward speed. Is this normal to have this low of a PID? Is this OK?

2. My yaw rate is very slow. My Witespy quad turns about it's yaw axis (rudder) much faster with less stick input. Can this be adjusted somehow? It works, it just takes a bunch of rudder to move it and it moves slow to my liking.

3. A little wobble in a hover in Stable mode. Not bad but want a touch better. You think keep turning the rate down would help?

Short clip of quad flying below.

Thanks in advance.

Tony

http://www.youtube.com/watch?v=a7lCm...e_gdata_player

http://www.youtube.com/watch?v=XOkx3dBDhiw
May 20, 2011, 10:59 PM
Registered User

Quadrino 550 FPV


Ready for testing tomorrow.

Still lots of little things to do. My custom CL & SPW antennas are not here yet.
Without the following I'm at 1,012 grams:
- FC cover
- Lipos
- Simple OSD
May 21, 2011, 11:05 AM
Registered User
I did a few test flights so far this morning, overall promising, but the default PID settings are not going to work. I'm getting a wobble on cyclic and LEVEL mode is not even close. So far I have come down from 4.0 to 3.8 on ROLL and PITCH P. I did stick calibrations before the second flight with the 3.8 settings. It flys ok, just get an oscillation on transitions in and out of forward flight. LEVEL has a pretty good wobble and drift. I am not well versed in PID tuning, as my first quad worked very well on default PID's. I guess I will learn now!
May 21, 2011, 11:22 AM
Registered User
Tony97's Avatar
I feel your pain. I made 10 adjustments over 2 battery packs. I filmed each flight from the ground to look over and see what PID did what. My low PID seemed to be the only way to keep wobble down. I like the soft feel when I fly. Better I think for taking video too from the quad.

Quote:
Originally Posted by cactus View Post
I did a few test flights so far this morning, overall promising, but the default PID settings are not going to work. I'm getting a wobble on cyclic and LEVEL mode is not even close. So far I have come down from 4.0 to 3.8 on ROLL and PITCH P. I did stick calibrations before the second flight with the 3.8 settings. It flys ok, just get an oscillation on transitions in and out of forward flight. LEVEL has a pretty good wobble and drift. I am not well versed in PID tuning, as my first quad worked very well on default PID's. I guess I will learn now!
May 21, 2011, 03:00 PM
Registered User
Did you change I and D at the same time?
May 22, 2011, 10:44 AM
Multirotor Builder!!!!!
Some video of my quadrino in open field flying.
Quadrino/witespy quad open field flying! (2 min 57 sec)
May 22, 2011, 01:50 PM
Registered User
llbr22's Avatar
I haven't mounted mine yet to the VIC20 frame, but where are you guys buying your standoffs and servo wires?
May 22, 2011, 06:25 PM
Registered User
You can make your own servo wires. I use one of those kits you buy with a crimper tool and lots of extra male pins. I just use a male pin on each side and cover it with shrink wrap. Only one connection from the rx to the board needs to be a regular male 3 pin servo lead.
For standoffs I ordered some vibration isolation ones along with some of the black hex plastic nuts, screws and standoffs at quadcopter.us
May 22, 2011, 06:26 PM
Registered User
What are you guys using for the PI settings on LEVEL? Has anyone got it dialed in stable yet?
May 22, 2011, 06:35 PM
Multirotor Builder!!!!!
I have mine at 3.5 and level is 9.1 and she is flying fine.
May 22, 2011, 06:51 PM
Registered User
yeap...... next shipment going out monday


If you paid for an advanced board your will be shipping ..




Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Article Hangar 9's Piper J-3 Cub 40 Plug-N-Play PNP Plug N Play Evo 46NT Powered ARF Review tailskid2 Scale Fuel Planes 13 Oct 09, 2016 04:15 PM
Help! need new flight controller recommendations n3m1s1s Multirotor Drone Talk 115 Jan 09, 2012 09:38 AM
Article Subsonic's Motrolfly Plug and Play Power System: Motor, Controller & Battery Review Michael Heer Power Systems 27 Dec 16, 2010 12:36 PM
Data Plug 'n Play separates: An Esky CP2 with an E-flight 2 in 1... elan Micro Helis 3 Mar 19, 2010 08:51 AM
Discussion Air Hogs Plug n'Play Flight Deck Simulator trust416 Micro Ready-to-Fly 14 Aug 05, 2007 10:44 AM