FH-X46 new quadcopter and hexacopter controller from FOXTECH - Page 3 - RC Groups
Thread Tools
May 16, 2011, 04:54 AM
Registered User
Originally Posted by oded mazor
than where can we buy the FH-X46 direct ?
Sign up now
to remove ads between posts
May 16, 2011, 09:02 AM
Suspended Account
He said "direct" not from a 3rd reseller.
May 16, 2011, 10:14 PM
Registered User
http://v.youku.com/v_show/id_XMjY2OTcxODk2.html mini quadcopter crash!!!!!!
May 16, 2011, 11:15 PM
Registered User
May 25, 2011, 06:16 PM
AMA 46133
I just received this board that I bought from Foxtech.

I am not affiliated with the vendor nor the manufacturer. Just a hobbyist testing and playing with all the different controller boards out there except for the MK Mikrocopter board.

I put it on my larger quad. The quad is using four Avroto 770 kV motors and Turnigy 30 A ESCs. Power is 4 cells 5800 mah that I just so happened to have lying around. Propellers are 11 X 4.7 APCs.

None of my MultiWii boards can fly this frame combination without a lot of grief. It wobble and oscillate until I almost crash it a few times. The KK blue board is better as far as controllability.

This AQ50D board (that's what it said on the manual and I have not idea what is the real name/number of this thing) is truly plug and play. No GUI, no computer hook up. Just mount it, plug it in adjust the servo reversing on my transmitter, calibrate the board on the quad and fly.

Perfectly right off the deck. With a very small hint of oscillation. Nothing substantial for a heavy quad.

Forward flight is fine. A bit of lag on the control. It wants to return back to level during slow flight and the nose tuck down a bit on faster forward flight. Pulling the quad on the turn took a fair bit of stick movement.

It doesn't seem to be a board designed for acrobatic but for smooth hovering around it is pretty good.

I have only turned the gain pot to about 65 percent so far and it is holding very solid.

I can hear the motor speed controller combinations do have a minor amount of jumpiness every once in a while on a regular basis but I cannot see too much movement on the vehicle itself.

Overall I am quite please with the board and I think it has some potential.
May 27, 2011, 02:40 AM
Gravity sucks :)
infinity-hobby also sells this board, 40 bucks cheaper too.
May 27, 2011, 05:21 AM
Suspended Account
lol thanks for the tip (trying to buy but paypal is failing it)
May 27, 2011, 08:41 AM
Registered User
does the firmware is upgradable?
May 27, 2011, 08:49 AM
Suspended Account
No but for 150 who cares
May 27, 2011, 08:55 AM
Registered User
Originally Posted by ddmt
infinity-hobby also sells this board, 40 bucks cheaper too.
they doesn t sell only the board...could you give me the link
May 27, 2011, 08:59 AM
Gravity sucks :)
Look for it in the Heli parts section, then click the DIY quadrocopter
May 27, 2011, 09:07 AM
Suspended Account
Finally paypal has fixed itself and I ordered it.
Death to fauxtech and their ripoff prices!
At least buying from taiwan (infinity-hobby) its more or less paying the cost for it directly. Since its made/designed in taiwan.
May 27, 2011, 09:19 AM
Registered User
at this price it s better to buy a openpilote cc!it s more cheaper,board is more powerful and it s an open source code so development is not
May 27, 2011, 09:33 AM
Suspended Account
Ya well, that's fine too.
With some tinkering it could even run CC code on it - hardware is same...
May 27, 2011, 09:48 AM
Registered User
yes maybe but the price is not the same
on top of that i prefer to help openpilot team and buy their board than a chinese no name and unknow board
this chinese board is more expansive than mk clone which have all inclued..

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Wanted quadcopter/octocopter/hexacopter ashabelnikov Aircraft - Electric - Helis (FS/W) 1 Feb 21, 2011 02:04 PM
Discussion Foxtech FH-25HD 550tvl day/night mrleenagle FPV Talk 8 Aug 13, 2010 10:36 PM
Discussion I need help building a quadcopter or hexacopter lazer155 Coaxial Helicopters 17 Feb 23, 2010 09:47 AM
Discussion Hexacopter using microkopter controller lazer155 Coaxial Helicopters 2 Apr 15, 2009 10:50 PM