Thread Tools
Jan 30, 2013, 08:27 AM
Krued Up
snolord1's Avatar
I'm running dynam 9 gr. with hardly a change in way of CG .actualy in my case,using a 450mA pack,made it balance even better
Sign up now
to remove ads between posts
Jan 30, 2013, 11:02 AM
Callsign: Zulu
Stuka_99's Avatar
Quote:
Originally Posted by snolord1
I'm running dynam 9 gr. with hardly a change in way of CG .actualy in my case,using a 450mA pack,made it balance even better
Good to know! i was afraid it might change my CG since the servos are behind the CG line but your post has proved my fears wrong! Thanks! Might be a good time for me to invest in a scale lol.
Jan 30, 2013, 01:14 PM
Registered User
Ordered a couple more Popwings, needed some way of hauling them. I love PVC!!
Jan 30, 2013, 01:16 PM
One more flight...
n00ber420's Avatar
Quote:
Originally Posted by RaptorAP
Ordered a couple more Popwings, needed some way of hauling them. I love PVC!!
That's a crate idea!
Jan 30, 2013, 01:57 PM
ICrashRCs
Might want to insulate your pipes.
Keep the wings from denting from bouncing.
Jan 30, 2013, 02:12 PM
Registered User
Quote:
Originally Posted by IFlyRCs
Might want to insulate your pipes.
Keep the wings from denting from bouncing.
Done and done... thanks!
Jan 31, 2013, 12:37 AM
STOP CALLING THEM "DRONES!!!"
Captain Ron's Avatar
Quote:
Originally Posted by Stuka_99
A question for all the Mini owners. What servos are you all using? I'm using 4.3g ones and they seem to chatter a little so I might change them.
I use EXI 9gram servos from Hobbypartz on my mini.
Jan 31, 2013, 01:14 AM
Callsign: Zulu
Stuka_99's Avatar
Thanks Capt Ron! I will defo change them for 9g ones cause these smaller ones do cost!
Jan 31, 2013, 10:40 AM
Krued Up
snolord1's Avatar
Those lil one might be ok for slower setup but once we start modding and get the thing going ballistic,they wouldn't be able to withstand the forces
Jan 31, 2013, 12:58 PM
STOP CALLING THEM "DRONES!!!"
Captain Ron's Avatar
Quote:
Originally Posted by snolord1
Those lil one might be ok for slower setup but once we start modding and get the thing going ballistic,they wouldn't be able to withstand the forces
Exactly why I changed mine. I originally built mine with 5 gram servos but they would flutter really bad at full throttle and in high speed turns. Sometimes in a dive with or without power they would respond slowly or not at all. I had one too many close calls and switched them out. Problem solved.
Jan 31, 2013, 01:02 PM
Hardcore EP 3D Flyer
VR Eyedoc's Avatar
where did you guys buy these flying wings?
Jan 31, 2013, 01:09 PM
Registered User
maurof78's Avatar

nitroplanes.com


Quote:
Originally Posted by VR Eyedoc
where did you guys buy these flying wings?
nitroplanes.com has them. Use code TECHONE15 for 15% off. That coupon code seems to be expiring today.
Jan 31, 2013, 02:01 PM
Hardcore EP 3D Flyer
VR Eyedoc's Avatar
Quote:
Originally Posted by maurof78
nitroplanes.com has them. Use code TECHONE15 for 15% off. That coupon code seems to be expiring today.
thanks!

and this is the same thing I guess. http://www.hobbyking.com/hobbyking/s...00mm_ARF_.html
Jan 31, 2013, 02:38 PM
ICrashRCs
There's 3 sizes.
Mini Popwing, Popwing and Large Popwing from Nitroplanes.
Bonsai and Teksumo from HobbyKing.
All made by TechOne.
Feb 01, 2013, 01:15 AM
Registered User
Alpha1actual's Avatar
Damn.. I've been hitting the teksumo threads, totally missed this one.

Popwing 900mm
Lunar Sessions FPV Night Vision (10 min 34 sec)


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question Techone models?? lectroglide Scratchbuilt Indoor and Micro Models 5 Aug 07, 2011 01:54 PM
Sold Techone Energy EPP Foamy Wattsup23 Aircraft - Electric - Airplanes (FS/W) 9 Mar 31, 2011 03:28 AM
Sold Techone Piaget 3D EPP New in box $45 shipped! Lindy757 Aircraft - Electric - Airplanes (FS/W) 2 Mar 17, 2011 11:01 PM
Discussion TechOne F3P??? cglynn Indoor Pattern/F3P 6 Mar 11, 2011 01:24 PM
Question techone malibu 2 or techone aeolus? genesis96 Indoor Pattern/F3P 16 Jan 19, 2011 01:02 PM