The smallest full-featured OSD——Skylark Tiny OSD - Page 23 - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Nov 16, 2012, 02:26 AM
Registered User
You guys are killin' me! HK has been out for well over a month. So I sit here jealous of u guys
Sign up now
to remove ads between posts
Nov 16, 2012, 03:17 AM
Bazinga!
Moelich73's Avatar
You can buy the Skylark products at RMRC:
http://www.readymaderc.com/store/ind...index&cPath=90
Nov 16, 2012, 11:13 AM
Gary
glmccready's Avatar
Jeff: yea, and at readymade you get version IIII, and can get the USB interface ($5), so you can program your OSD.
Nov 16, 2012, 11:52 AM
Bazinga!
Moelich73's Avatar
Quote:
Originally Posted by glmccready
Jeff: yea, and at readymade you get version IIII, and can get the USB interface ($5), so you can program your OSD.
Did you mean version III?
Nov 16, 2012, 01:29 PM
Registered User
neato4u's Avatar
wow $100 bucks for this.. let me go through the thread and see if it's worth it. It is a plug and play thing right? Does it need any calibration before start?
Nov 16, 2012, 01:39 PM
Registered User
u2builder's Avatar
I really like my little tiny OSD III (from Readmade). The display is clear and easy to readi.

I really wish Skylark would address the software and make it load properly on a modern Windows computer. It is just nuts to have to emulate Windows XP and when I do the display of the software isn't really quite right. I still can't connect all the time and have basically given up.

As to the calibration of the voltage and current, it would be nice to have some proper instructions.

Plus, they should address the fact that some of us fly multicopters, and have adjustible parameters so that the end of flight display will not come up every time the machine slows down for a few seconds. Basically it shouldn't come up until the machine is stationary for a user set period of time. It is annoying.

It would be the best bargain out there in OSD's if Skylark would just take care of a few of these things.
Nov 16, 2012, 04:36 PM
Gary
glmccready's Avatar
Yea, version 3..lol! I like mine too! Give me just what I need, and not too expensive! It is a bit annoying that the "summery" pops up when I hover, mostly just to check voltage and timer, before I take another trip. It doesn't really bother me that much. I know you can turn it off completely but I like it! I've even gotten so I record my FPV to an old video camera so I can check things later. I put the data in video and synced up the HiDef and the OSD feeds!
FPV height test (3 min 56 sec)
Nov 18, 2012, 06:22 AM
Registered User

Done


Quote:
Originally Posted by glmccready
Jeff: yea, and at readymade you get version IIII, and can get the USB interface ($5), so you can program your OSD.
Cancelled the HK order and ordered this one. It'll be here Tuesday
Thanks!
Nov 18, 2012, 06:25 AM
Registered User
Quote:
Originally Posted by glmccready
Yea, version 3..lol! I like mine too! Give me just what I need, and not too expensive! It is a bit annoying that the "summery" pops up when I hover, mostly just to check voltage and timer, before I take another trip. It doesn't really bother me that much. I know you can turn it off completely but I like it! I've even gotten so I record my FPV to an old video camera so I can check things later. I put the data in video and synced up the HiDef and the OSD feeds!
http://www.youtube.com/watch?v=DtMv7...ure=plpp_video
thats my other question... What are you'all using to record the downlink video, old tape decks and cameras, or is there a cheap NTSC tapeless recorder out there?
Nov 18, 2012, 01:05 PM
Gary
glmccready's Avatar
Jeff: I'm using an old Sony TRV-740 digital 8 video camera. It has the 1/8" video input and a "VCR" function. The thing is outdated tech, but does the trick, and I already owned it! My video Rx already had two outputs too.
Nov 18, 2012, 03:03 PM
Registered User
u2builder's Avatar
This is a really nice little OSD. It is really easy to see in my Fatshark goggles. I did a few flights with mine on my DJI-450 today and am really impressed with how easy it is to read. I just ordered another one for a winter project before they go out of stock from Ready Made.

I have said it before and will say it again: I really wish Skylark would work on their software and make it easier to use on a modern computer.
Nov 18, 2012, 09:06 PM
Registered User
Quote:
Originally Posted by glmccready
Jeff: I'm using an old Sony TRV-740 digital 8 video camera. It has the 1/8" video input and a "VCR" function. The thing is outdated tech, but does the trick, and I already owned it! My video Rx already had two outputs too.
I have the same cam but was hoping there was something reasonable that recorded analog video. Guess I'll break it out and start loosening up the mechanics
Nov 18, 2012, 10:35 PM
Gary
glmccready's Avatar
Jeff: too funny that you have the Sony 740! It works fine after all these years! lol There are some inexpensive DVR recorders but I don't know if they are any good?

http://www.ebay.com/itm/Mini-DVR-Cam...item45fb21417b
Nov 19, 2012, 06:21 AM
Registered User
u2builder's Avatar
I have an old Sony too, but the batteries are dead and it is kind of big and bulky. I bought one of these as it was inexpensive:

http://www.foxtechfpv.com/mini-d1-qu...sed-p-533.html

I haven't used it much as I have been focusing on my flying, but maybe today I'll give it a try.
Nov 20, 2012, 01:58 AM
Registered User
Has anyone changed the Deans connector to an EC3? I'm not really interested in making adapters


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product NEW BSII OSD - Smallest OSD in the market fpvsystems FPV Talk 12 Jun 19, 2010 04:59 AM
Discussion DX6i full featured? benedium Radios 24 Feb 28, 2010 08:45 AM
Discussion Smallest 'Full House' EDF FlyAndy Electric Ducted Fan Jet Talk 6 May 14, 2009 12:08 AM
Discussion Larger full featured "Rookie"? hangglider Flying Wings 2 Jan 23, 2006 03:43 PM
"Gilligan's Island" hotwire foam cutter; easy yet full-featured vpatron Foamies (Kits) 19 Dec 19, 2005 11:43 PM