Thread Tools
May 31, 2012, 06:56 AM
Registered User
Skylark Tiny OSD
Last edited by skylarkfpv; Jun 05, 2012 at 02:24 AM.
Sign up now
to remove ads between posts
Jun 10, 2012, 09:31 PM
Registered User
rcpilot23's Avatar
I have a Hobby King (Skylark) Tiny OSD II for sale

$50 plus post


Has been excellent but I have just bought a much larger quad which came with an OSD.
Jun 18, 2012, 10:18 AM
On a holiday?
boopidoo's Avatar
Quote:
Originally Posted by skylarkfpv
Sorry for the late reply.
How to upgrade the firmware, please refer to the instruction
http://www.skylarkfpv.com/intl/en-us/tiny_upgrade
I'm sorry if this is an old question but to which socket on the OSD should I connect the usb-adapter, the GPS or current sensor?

Also, the link in the quoted post appears dead and the current manual doesn't cover this.

Nevermind I think I found the answer, it should be connected to the GPS-port (below).

Quote:
Originally Posted by skylarkfpv
Connect the OSD(GPS Port) to your PC by Skylark USB cable
Please refer to Skylark AAT Suite manual page 6
Skylark website-> Support-> Skylark AAT Suite [Download]
Jun 19, 2012, 05:59 PM
simplefly
Can someone please advise how to connect it to gopro via immersion cable like this one?
http://www.readymaderc.com/store/ind...roducts_id=290

Thanks
Jun 20, 2012, 02:28 AM
Registered User
TalaxY's Avatar
How to calibrate current sensor.. I have got 6000mah 3s battery and 1200kv motor.. I don't have got any multimeter, can someone tell me what value I need put for this type of battery. My Tiny OSD II reads max 750mah when I empty my battery. I wont that my Tiny OSD II read around 6000mah.. I just wont that reading are close not perfect close.
PLEASE HELP!?
Jun 20, 2012, 11:38 AM
Registered User
The Tiny show the power consumption, it is the consumption what your equipment used, not the battery storage.

Calibrate current sensor
Jun 21, 2012, 06:00 AM
On a holiday?
boopidoo's Avatar
Also, I think it would be good to add either in the software or in the manual the accepted range of COM-ports. AFAIK the number should be low, I tried with the default number COM38 and it didn't work. COM2 did work well though.
Jun 21, 2012, 07:26 AM
simplefly
OK Guys,

I spen an hour yesterday trying to hook this up.

I get OSD to show but no video. Here is what I have, please see attached.

Can someone help me "connect wires"?
Jun 21, 2012, 07:27 AM
Registered User
Quote:
Originally Posted by boopidoo
Also, I think it would be good to add either in the software or in the manual the accepted range of COM-ports. AFAIK the number should be low, I tried with the default number COM38 and it didn't work. COM2 did work well though.
There is a new version that allows you to select the com port from the program manually. Look in the sponsor section on FPVLab it is in the skylark sticky.
Jun 21, 2012, 07:36 AM
Registered User
Quote:
Originally Posted by simplefly
OK Guys,

I spen an hour yesterday trying to hook this up.

I get OSD to show but no video. Here is what I have, please see attached.

Can someone help me "connect wires"?
Give this a try it should get you going.

On the OSD Board> White= video to vtx/ Red= video from Camera / Black= Ground to camera

On the Camera> Brown= Ground to OSD / Red= Video out to OSD / White= Audio Right to vtx Green / Orange= Audio Left to vtx White

On VTX> Black = 5V Ground out (connect to nothing)/ White= Audio Left to camera orange / Green= Audio Right to camera White/ Black= Video to OSD white/ Red= +5V (connect to nothing)
Last edited by MASHTON; Jun 21, 2012 at 08:47 AM.
Jun 21, 2012, 01:57 PM
Registered User
LittleG's Avatar
Give this diagram a try.

Jun 21, 2012, 02:43 PM
Registered User
Quote:
Originally Posted by LittleG
Give this diagram a try.

That is a Trace 2 not a Tiny 3. It won't help him. I got him squared away.
Jun 22, 2012, 09:08 AM
simplefly
MASHTON,

That connection is not working. Any chance to do what LittleG did (diagram)?
Here is what I did. See picture.

_ dan
Last edited by simplefly; Jun 22, 2012 at 09:22 AM.
Jun 22, 2012, 12:00 PM
Registered User
Quote:
Originally Posted by simplefly
MASHTON,

That connection is not working. Any chance to do what LittleG did (diagram)?
Here is what I did. See picture.

_ dan
Posted on FPVLab
Jul 05, 2012, 08:55 PM
Registered User

New firmware(V2.8) for Tiny OSD


Only for Tiny OSD II/III
Tiny II Firmware V2.8 [beta] [Download]
New features:
1. Support digital RSSI
2. Add Total Distance in flying summary
3. Enable/Disable flying summary by software

Skylark Configuration Tool V3.5 [beta] [Download]
1. Support Analog/Digital RSSI selection
2. Flying summary Disable/Enable
3. COM port by manual selection
Step: PC Configure ->COM port manual select->COM


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product NEW BSII OSD - Smallest OSD in the market fpvsystems FPV Talk 12 Jun 19, 2010 03:59 AM
Discussion DX6i full featured? benedium Radios 24 Feb 28, 2010 07:45 AM
Discussion Smallest 'Full House' EDF FlyAndy Electric Ducted Fan Jet Talk 6 May 13, 2009 11:08 PM
Discussion Larger full featured "Rookie"? hangglider Flying Wings 2 Jan 23, 2006 02:43 PM
"Gilligan's Island" hotwire foam cutter; easy yet full-featured vpatron Foamies (Kits) 19 Dec 19, 2005 10:43 PM