The smallest full-featured OSD——Skylark Tiny OSD - Page 16 - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Mar 30, 2012, 09:37 PM
I LIKE WAFFLES....
SENTRY 62's Avatar
I am just trying to make as many people as successful as possible - I apologize also if I was harsh. Group hug?
Sign up now
to remove ads between posts
Apr 07, 2012, 06:00 AM
Registered User
Quote:
Originally Posted by daign
Apoligies for coming off the wrong way. I'd just expect a product in 2012 to be plug and play with windows 7 thats all.

I keep the XP box around for a reason
Try making w7 compliant applications to have a new meaning of "unacceptable" term...
Thats why our thousands customers base is still on XP, and we even afford the luxury to refuse Vista/W7 customers.
And you still didn't seen the computers "apocalypse"... wait for W8 to appear... this will be indeed the MS end.
Apr 12, 2012, 11:12 AM
Registered User
Hey guys, can someone tell me which setting in the progra sets the view to the HUD F16 view?
Apr 12, 2012, 11:21 AM
Honey Badger
Blue Chip's Avatar
Quote:
Originally Posted by jglover
Hey guys, can someone tell me which setting in the progra sets the view to the HUD F16 view?
Normal.

The Simple is with the arrow.
Apr 19, 2012, 10:08 PM
Registered User
Ok, so Im having a problem with the OSD not holding its settings after I set them. Somewhere between me unpluging it from my computer and pluging it into the battery, it defaults back to the plain jane screen. Im trying to get the F16 HUD. Any suggestions? Im hitting the "Set" button each time and it says its been set in the little status screen at the bottom left of the program.
Apr 19, 2012, 10:50 PM
Registered User
GREAT!!! I just did a Firmware Update and now I have NO DISPLAY!!! The OSD wont even connect back to my PC!
Apr 21, 2012, 01:48 AM
Registered User
rcpilot23's Avatar
Hi all

So I bought the tiny II from hobby King with the fats hark rtr fpv package

Then was told to buy the USB from skylark fpv which I orders today

So I just need to download the tiny II latest firmware and run the setup to change the display to the F16 display?

Mine is coming with the 4hz gps and barometer

Whats the difference between the 4Hz and the 10hz gps ?

Hi Skylarkfpv, I paid for DHL shipping , will you ship on Monday and email me the tracking number?

So should the altitude readings be accurate and quick to update?

Will be using it on a quad copter

Should I just cut into the video signal and power lead to connect up the OSD to the camera?

Or is there a better way ?
Last edited by rcpilot23; Apr 21, 2012 at 06:15 AM.
Apr 21, 2012, 03:05 PM
Registered User
do you ship international i want one for a ultra micro fpv i have? and it can be used without the current sensor or is a way to make it lighter?
Apr 26, 2012, 07:45 AM
Registered User
Quote:
Originally Posted by ara25demayo
do you ship international i want one for a ultra micro fpv i have? and it can be used without the current sensor or is a way to make it lighter?
It can be used without the current sensor
Apr 26, 2012, 09:05 AM
Registered User
rcpilot23's Avatar
Hi,

I have installed the Tiny OSD and it is working.


But I keep getting the message

"GPS Signal weak" flashing
Apr 27, 2012, 12:09 AM
Registered User
rcpilot23's Avatar
My Tiny OSD is happy now locking onto 6 to 7 sats and all good.


Current sensor works very well and seems accurate.
Apr 29, 2012, 08:21 AM
Registered User
rcpilot23's Avatar
Any suggestions when I see the altitude at 11 meters and the 5m next the home arrow when I have hovered directly above the home point?


Shouldnt they be the same value.

My OSD reads 5m when it was fence height which is about 2 metres


Lotusrc T380 with Tiny OSD II (1 min 18 sec)
May 03, 2012, 01:03 AM
Registered User
Navigator53's Avatar
Can someone tell us the range of input voltage for Trace OSD?

I've searched and keep finding 5 volts powered off spare receiver channel.

I'd like to have the transmitter & Skylark on their own system rather than powering off the receiver that gets it's power from the Copter Control board so if something goes bad I'll still have flight control.

To be sure, I want to power the entire video system including Skylark off one 3s 11.1 (12 volt) lipo

If Skylark can handle 12 volts (3s lipo) not sure how to wire it for the RSSI to work?
May 03, 2012, 11:12 AM
Registered User
Navigator53's Avatar

Took me a while to find an answer


I'm going to try and answer my own question for anyone else trying to find the input voltage to tiny & trace.

Looks like it's limited to 5 volts but is capable of reading thru the current sensor 3s or 4s

Interesting, the older style rebranded 4hz model says it has a range of 7.4 to 12 volts.

http://www.hobbyking.com/hobbyking/s...t_sensor_.html

Open the pdf file then Scroll on down http://futurehobbies.com/support/dow...ntenna-tracker
Last edited by Navigator53; May 03, 2012 at 11:32 AM.
May 09, 2012, 01:50 PM
simplefly
Hi Guys, I just got the Skylark OSD III. How can I connect it to my Fatshark Predators with Immersion 600mw tx? Anyone has a connection photo or diagram. If yes, please post.

- thanks


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product NEW BSII OSD - Smallest OSD in the market fpvsystems FPV Talk 12 Jun 19, 2010 04:59 AM
Discussion DX6i full featured? benedium Radios 24 Feb 28, 2010 08:45 AM
Discussion Smallest 'Full House' EDF FlyAndy Electric Ducted Fan Jet Talk 6 May 14, 2009 12:08 AM
Discussion Larger full featured "Rookie"? hangglider Flying Wings 2 Jan 23, 2006 03:43 PM
"Gilligan's Island" hotwire foam cutter; easy yet full-featured vpatron Foamies (Kits) 19 Dec 19, 2005 11:43 PM