Thread Tools
Old Mar 25, 2012, 04:52 PM
FLYING-HIGH is offline
Find More Posts by FLYING-HIGH
Registered User
congratulations keep posting on you progress
Sign up now
to remove ads between posts
Old Mar 28, 2012, 02:21 PM
stankersley is offline
Find More Posts by stankersley
Registered User
Hey, any one have any experience with glue joints popping loose on 72" 330sc, I have had it happen on the wing tube in a hard landing and again in the air (fatal) with replacement wing, and have emailed and called 3dhs over last 6 weeks, two emails and 15+ phone calls and have not been able to get a hold of anyone.
I am a little frustrated with 3dhs at the moment because of the glue joint not holding but also no response of emails and not answering phone. anyone else having these kind of issues?

Waiting to purchase another but will probable choose another brand?

Thanks for listening to my rant, let me know if anyone has had similar issues.

Scott
Old Mar 28, 2012, 02:36 PM
3DNater is offline
Find More Posts by 3DNater
3d NOOBular
3DNater's Avatar
Sorry about your plane man... good luck.
Old Apr 03, 2012, 09:31 PM
gregory.da is offline
Find More Posts by gregory.da
ProBro, 3D
gregory.da's Avatar
Scott, try sending a PM to "the KM" He was very helpful and responded quickly.
Old Apr 03, 2012, 09:33 PM
gregory.da is offline
Find More Posts by gregory.da
ProBro, 3D
gregory.da's Avatar
Quote:
Originally Posted by pryor808 View Post
Guy's!! The 71" Slick is a dream to fly. Some flyers did mention that it flies like a 30% airframe, not quite (my opinion) but, great flyer. Knife Edge pulls a little towards the belly (gear). My Dle 30/Cannister exhaust with a 19A Vess is a great combo! Hovers at 1/4 throtle. I have not weighed the plane yet but, I am pretty sure is weighing close to 11lbs.
Does the Slick have a tunnel in the fuse for the cannister muffler, or did you modify it? Any photos of it on the airplane?
Old Apr 04, 2012, 12:42 AM
3DNater is offline
Find More Posts by 3DNater
3d NOOBular
3DNater's Avatar
I believe my 70" has a tunnel... I imagine the 71" is the same. I'm waiting for confirmation for sure. You can see it in this pic. Is that what yiou are looking for?

[http://imageshack.us/photo/my-images/846/img0457tr.jpg/

edit: sry the first link I posted didn't work out right.
Old Apr 04, 2012, 12:56 AM
flyracer is offline
Find More Posts by flyracer
Wannabe 3D Pilot
flyracer's Avatar
yes, my 71" Slick has a canister tunnel... however I'm running a DLE30 with a PITTS style muffler and I'm very pleased with the setup. Plenty of power!

Flyracer
Old Apr 04, 2012, 01:00 AM
3DNater is offline
Find More Posts by 3DNater
3d NOOBular
3DNater's Avatar
We just decided to add smoke to my setup... jeez the money never stops lol. We are planning to make a tray that slides into the muffler tunnel with the smoke stuff mounted to it.
Old Apr 04, 2012, 01:27 AM
flyracer is offline
Find More Posts by flyracer
Wannabe 3D Pilot
flyracer's Avatar
sounds like a good plan! you should be able to get a small smoke/fuel tank back toward the wing tube.
Old Apr 04, 2012, 01:50 AM
3DNater is offline
Find More Posts by 3DNater
3d NOOBular
3DNater's Avatar
Going for a 12 oz tank I think.
Old Apr 04, 2012, 01:54 AM
kerwin50 is offline
Find More Posts by kerwin50
Registered User
kerwin50's Avatar
what pump system are you going to use.
Be sure to fuel proof the inside of the fuse area where your tanks are.
Old Apr 04, 2012, 12:33 PM
3DNater is offline
Find More Posts by 3DNater
3d NOOBular
3DNater's Avatar
probably going to use this http://www.ibcinyourc.com/store.php?...ump&pd=3401044

Haven't made a final decision yet.
Old Apr 04, 2012, 12:54 PM
kerwin50 is offline
Find More Posts by kerwin50
Registered User
kerwin50's Avatar
The sullivan's have been known to leak and the brushed motors burn out easy
These are more money but really last and don't leak.
http://www.aerographix.biz/harris_smoke_pumps.htm
Old Apr 04, 2012, 01:55 PM
3DNater is offline
Find More Posts by 3DNater
3d NOOBular
3DNater's Avatar
Thanks for the tip Alpha
Old Apr 06, 2012, 09:10 AM
kerwin50 is offline
Find More Posts by kerwin50
Registered User
kerwin50's Avatar
BTW Nate I've started doing so research and found that some guys are having good luck with the TME smoke pump
http://www3.towerhobbies.com/cgi-bin...&I=LXAZRJ&P=ML


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion 71" AJ Slick Gas - First time with gas Hewey19 Fuel Plane Talk 7 Sep 06, 2011 04:53 PM
Sold 3dhs 71" aj slick - nib 6L6Amp Aircraft - Electric - Airplanes (FS/W) 4 Apr 05, 2011 12:09 PM
Discussion I'm torn, 71 slick or 72 sc? KillerCut 3D Flying 9 Mar 25, 2011 07:20 PM
Discussion 3DHS 42"Slick Side Force Generators bigtexas 3D Flying 3 Mar 03, 2011 01:42 PM
Wanted 3DHS 70" Slick Gas parts!!! helifryer Aircraft - Fuel - Airplanes (FS/W) 0 Feb 20, 2011 08:47 AM