Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
This thread is privately moderated by Eastcoast78, who may elect to delete unwanted replies.
Old Apr 05, 2011, 09:52 PM
Eastcoast78 is offline
Find More Posts by Eastcoast78
Dixie Normious
Eastcoast78's Avatar
Discussion

New EPP Edge540T


She is coming along nicely. Here's a few pic's i just took.
Flats all Gooped up. I used White Gorilla glue on the Yakk55,so i figured id see how the GOOP was. So far on the Stick mount its holding nicely.









Heres some more Pictures


CF Bracing.



Ply Mount ready to be cut
the round firewall type mount that comes with the Stick mounts are not big,So well mount the Ply mount too the Plastic mount.
Well still be able too pop off the Plastic mount from the Stick mount in the
future.




Spent most of yesterday finishing up the Edge540T form Leadfeathers Tread.
Still a few little details to be done to complete.
Paint canopy,make some Push rod guides/holders along the tail to keep the
rudd/elev PR's form flexing.







Next is Maiden Flight. I think she is a winner for sure.
Stay tuned for a maiden video
Last edited by Eastcoast78; Apr 10, 2011 at 11:48 AM.
Sign up now
to remove ads between posts
Old Apr 06, 2011, 12:37 AM
Srcc is offline
Find More Posts by Srcc
Registered User
That looks really good, what is the wingspan on this one?
Old Apr 06, 2011, 12:55 AM
Eastcoast78 is offline
Find More Posts by Eastcoast78
Dixie Normious
Eastcoast78's Avatar
Quote:
Originally Posted by Srcc View Post
That looks really good, what is the wingspan on this one?
Hey Srcc, First post!!! This one is a 32''. I'm just gluing up the bottom Fuse now!! i think this one is going to have a more
Scale feel. I haven't flown my Yakk55 in calm weather yet. But sure keeps you on your toes.

Wind helps with that!!lol
Last edited by Eastcoast78; Apr 06, 2011 at 01:02 AM.
Old Apr 06, 2011, 12:02 PM
Prime_8 is offline
Find More Posts by Prime_8
Lawn dart pilot/builder
Prime_8's Avatar
sweet.

hehe have to drop my yak bits of soon.
Old Apr 06, 2011, 02:42 PM
SnowDog1974 is offline
Find More Posts by SnowDog1974
Registered User
SnowDog1974's Avatar
Great pictures and great paint job! Can't wait to hear more!
Old Apr 07, 2011, 01:21 AM
Eastcoast78 is offline
Find More Posts by Eastcoast78
Dixie Normious
Eastcoast78's Avatar
Cool ,thanks. Im seting up the T/E servos now,then hand make some Ply Arms etc..
Going with some CF pushrods on this one. I like Music wire and all,but it just looks heavy lol.

Have the Ply Motor mount drawn up. Need too get out the Dremel and speed up the Process.Using a backsaw is pain staking. Ill have more pics soon.

SRCC so how was the yak55 indoors? I uped the Motor on that!!! Most use a 1300kv-1500kv Bluewonder. Theres a 1700kv on it now. On a 3S with a 8x4 Prop, Its cazy fast (if you want it to be)!!
I found even in the wind the 2S would be better inside or on a calm day!! Ive also tested a 7x4 on a 3S and its alot tamer.
Last edited by Eastcoast78; Apr 07, 2011 at 11:05 AM.
Old Apr 07, 2011, 07:45 AM
Prime_8 is offline
Find More Posts by Prime_8
Lawn dart pilot/builder
Prime_8's Avatar
send me template you want for motor mount ...
i'll try and run you one off

i have 7x5e ... hehe.
Old Apr 07, 2011, 11:04 AM
Eastcoast78 is offline
Find More Posts by Eastcoast78
Dixie Normious
Eastcoast78's Avatar
i sent it to you last night.
Old Apr 08, 2011, 02:07 AM
Eastcoast78 is offline
Find More Posts by Eastcoast78
Dixie Normious
Eastcoast78's Avatar
Got a little bit more done on the 540T. Waiting on some 5G servos and need to swing by the LHS to she if they have any 1-2mm CF rods. I was going too use .032 music wire but i think im going to try the CF rods with Music wire ends ,CA'Ed with Heat shrink.
As of now it looks like shes well come in on a AUW of around 6.5oz ,Dry/without battery.
Cant wait too try my new Nano 2S 460Mahs.
Last edited by Eastcoast78; Apr 08, 2011 at 11:26 AM.
Old Apr 08, 2011, 11:38 AM
Prime_8 is offline
Find More Posts by Prime_8
Lawn dart pilot/builder
Prime_8's Avatar
looks good ..

that ply is some thick. lol.

the one i made is 1/32 , n strong .
\
I'll prolly need one of them black mounts .. lol


looks great , that cf should make for a rigid tail.

reminds me i need 1mm / .5 mm cf , n som cf tubing .. lol.
Old Apr 08, 2011, 11:56 AM
Eastcoast78 is offline
Find More Posts by Eastcoast78
Dixie Normious
Eastcoast78's Avatar
yea i know its 1/32 its all i have. Michaels didnt have any.
I used the CF form my old GP flatout(redBull) i tore her down last ngiht shes had her day lol.
savaged the CF form her lol.

What have you used for your Spar on the Yak?
Old Apr 08, 2011, 08:41 PM
Prime_8 is offline
Find More Posts by Prime_8
Lawn dart pilot/builder
Prime_8's Avatar
yeah.

i will have to drop by lhs n get some 1mm
for pushrods .

i need 2 1/4 x 32 tubes , thin wall for tail booms in a um uav
Old Apr 08, 2011, 11:33 PM
Eastcoast78 is offline
Find More Posts by Eastcoast78
Dixie Normious
Eastcoast78's Avatar
right on. Yea im not sure if the LHS has any 1mm cf now.
All i have left is 1 ,3mm CF tube. Thats what i use for the Spars.
Last edited by Eastcoast78; Apr 27, 2011 at 01:58 AM.
Old Apr 27, 2011, 11:53 PM
Eastcoast78 is offline
Find More Posts by Eastcoast78
Dixie Normious
Eastcoast78's Avatar
Heres a few pics of the SFG's i just added. Pins are only in temp,till the Goop sets up.
I made some test Sfg's out of Doulbed DSF and then covered with clear packing tape.
I was so impressed with how they helped the plane fly in 20k winds and how good it helped
Knife Edges ,i have too make some out of EPP.





Old Apr 28, 2011, 01:14 AM
Prime_8 is offline
Find More Posts by Prime_8
Lawn dart pilot/builder
Prime_8's Avatar
nice.
looks solid

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Brand New 19" EPP Brushless Yak (UMX Beast Guts) tonebone Aircraft - Electric - Micro & Indoor Airplanes (FS/W) 3 Mar 20, 2011 12:14 PM
Sold Techone Piaget 3D EPP New in box $45 shipped! Lindy757 Aircraft - Electric - Airplanes (FS/W) 2 Mar 18, 2011 12:01 AM
For Sale RTF EPP Hyperflea - Trade for EPP 3D!!!!! hsgreer Aircraft - Electric - Airplanes (FS/W) 5 Mar 10, 2011 09:06 PM
Aeroworks edge540t/Magnum 1.20 4Stroke 4 Sale marshallcowboy Aircraft - Fuel - Airplanes (FS/W) 5 Jan 24, 2005 07:45 PM