Antonov AN-225 plans needed - RC Groups
Thread Tools
Apr 04, 2011, 09:52 AM
Registered User
Help!

Antonov AN-225 plans needed


Hi

I was thinking on starting to build a Antonov AN-225.
I was planning on using 6 x 55mm edf's.
The matirial i wnat to use is depron and balsa.

I have searched the web but could't find any downloadable plans por this plane. Only found 3 views draws.

Can someone help me on this?
Sign up now
to remove ads between posts
Apr 04, 2011, 12:19 PM
Vozdushno Desantnie Voiska
specnaz's Avatar
have you tried this?
http://airwar.ru/

http://airwar.ru/other/draw/an225.html
Apr 04, 2011, 12:57 PM
Registered User
Thanks for your help. I have seen the images, but i'm new at building and i was looking for some more detailed plans.
Apr 04, 2011, 06:59 PM
Vozdushno Desantnie Voiska
specnaz's Avatar
If you're new at building, i suggest you make some simple aircraft for beginning , some Cessna or a glider. I'm afraid that is the most detail plans you can find on the Net , it has bulkheads and all surfaces you need to build , rest is on your craft
Apr 04, 2011, 11:46 PM
Registered User
LuvEvolution7's Avatar
yeah, you aren't going to find plans for this airplane, just some good 3 views with formers. unless of course, you can find someone who is building one already and might be willing to share what they have. I know there's a few builds going on, so check out the search bar and see what you come up with. other than that, you are probably SOL if you don't have the experience to scrachtbuild from 3 views. of course, the good thing about these forums is that there's always people to help you out if you choose to scratch from a 3 view.
Apr 05, 2011, 04:26 PM
Registered User
Adrianh's Avatar
Hi,
Have a look at GAD and their AN225: http://www.greenairdesigns.com/lab2/...id=85&Itemid=1

Adrian
Apr 06, 2011, 01:23 AM
Scale Modeler
Concordefan's Avatar
Quote:
Originally Posted by LuvEvolution7
yeah, you aren't going to find plans for this airplane, just some good 3 views with formers. unless of course, you can find someone who is building one already and might be willing to share what they have. I know there's a few builds going on, so check out the search bar and see what you come up with. other than that, you are probably SOL if you don't have the experience to scrachtbuild from 3 views. of course, the good thing about these forums is that there's always people to help you out if you choose to scratch from a 3 view.
I'll double what Rich said about An225.....
Apr 08, 2011, 05:06 AM
Registered User
Ok

I could'nt find any plans for this plane

But i found a nice 3d model of it for google sketch.

Can someone point me in the right direction so i can use the 3d model to make the plans?
Apr 08, 2011, 09:51 AM
Registered User
Sorry, i should have used the search option before posting.
I found some posts with instroction on using google sketch.

What i am planing on doing (in a general line) is to cut some section on google sketch then use them to creat a plan. I'm o thinking writh?
Apr 08, 2011, 03:59 PM
Avoid The Ground!
Flexserve's Avatar
Just get a card model of the thing and make it from depron and carbon rods...
Apr 10, 2011, 02:57 AM
Registered User
domll's Avatar
As Flexserve says, heres a link:

http://www.paper-avia.com/en/modelz/...w4_t/1379#top3

Go with the 21mb one, better suited due to detail. heres acouple of picture of her builtup.
Last edited by domll; Apr 10, 2011 at 04:11 AM.
Apr 12, 2011, 02:25 AM
http://www.greenairdesigns.com
mjblack's Avatar
HI all,

I would like to thank Ady for mentioning us about the AN-225.

If it helps, we have been working on the updates to the kit last week and now in the process of proving these.

The kit is also 10% bigger at 1.7m span and can now carry either 40 or 50mm EDF`s

If all goes well i see no reason why it could not be released either late April or early May. We know that airframe flies superbly, we just needed to make it easier to manufacture and i hope that we have now done that!

Here are a few pics also with the 'Buran' Attached. Also a couple of VERY poor pics of the Buran being released from the AN-225 (the Buran was also RC)

Best regards,

Mike.

Dr Mike Black M.D Green Air Designs
Apr 12, 2011, 04:25 PM
Registered User
LuvEvolution7's Avatar
I say buy and build the GAD 225. if it's anything like the rest of their lineup, you won't be disappointed. the Lightning was cake to build, as I'm sure this one will be.
Apr 17, 2011, 01:48 PM
Skilled crasher
The best 3d models are here: http://www.buran.ru/htm/3d-model.htm
Use them!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Help! Antonov An-225 edf. Salvador Lazca Mexico 77 Jan 26, 2011 05:43 PM
Question RC X-15, nasa space shuttel, bumble bee II, Antonov An-225. pirate cat Electric Plane Talk 27 Mar 27, 2008 09:52 AM
Cool Aero Ace Scale Antonov An-225 catman529 Micro Ready-to-Fly 3 Mar 16, 2008 04:16 PM
Antonov AN-225 aids Electric Ducted Fan Jet Talk 12 Jan 17, 2005 07:03 PM