Thread Tools
Apr 02, 2011, 10:43 AM
Registered User
FlyBoyTha1's Avatar
Question

XPS Pro Fan Esc Settings For CC120HV - CC160HV Questions:


Anybody know the XPS Pro Fan Settings For Using A CC120HV CC120HV - CC160HV ?

Thanks!
Last edited by FlyBoyTha1; Apr 03, 2011 at 06:58 AM.
Sign up now
to remove ads between posts
Apr 02, 2011, 12:18 PM
EDF all the way!
bruff's Avatar
Used medium setting and outrunner mode. Best check with Scott after this weekend.
Bob
Apr 02, 2011, 03:27 PM
Registered User
FlyBoyTha1's Avatar
Quote:
Originally Posted by bruff
Used medium setting and outrunner mode. Best check with Scott after this weekend.
Bob
Thanks Bob
Apr 02, 2011, 06:12 PM
deltas are cool
AIR SALLY's Avatar
i was told not to use outrunner mode,that is for big prop motors with low kv.
Apr 02, 2011, 06:22 PM
Senior Member
Arngeir Blakseth's Avatar
Yep, same I was told about the old version with the Big Screamer. I ended up at 5 degrees timing, the recommendation was 0 and inrunner mode, but I had to add some timing to prevent sync loss/stuttering above 2/3 power.
Apr 02, 2011, 09:50 PM
deltas are cool
AIR SALLY's Avatar
bob vincent set mine up for the LS/xps motor ...and the XPS pro runs perfect on the same settings...i just dont remember what numbers he put in
Apr 03, 2011, 05:18 AM
Registered User
FlyBoyTha1's Avatar
Sound like i have a product with no diretion on the right esc settings

You can't even google the settings
Last edited by FlyBoyTha1; Apr 03, 2011 at 06:53 AM.
Apr 03, 2011, 05:40 AM
DominicM
DominicM's Avatar
While we are on the subject of ESC setup for this fan would be good to know what it should be for the Hacker MasterSpin 170A ESC.
Apr 03, 2011, 06:02 AM
Xtreme Power Systems
HV controllers - 0 degrees, outrunner mode
Spin controllers - 30 degrees, 8 poles
Apr 03, 2011, 06:12 AM
Registered User
FlyBoyTha1's Avatar
Quote:
Originally Posted by JimDrew
HV controllers - 0 degrees, outrunner mode
Spin controllers - 30 degrees, 8 poles
Thanks Jim,

How about the other settings as it would be nice for others to see if any other settings should be changed also for the CCHV Esc's.



Throttle Response: High, Med, Low?

Motor Start up: High, Med, Low?

Motor Timing: High, Med, Low?

Cutoff Type: Hard Cutoff, Soft Cutoff?

Also what kind of numbers are expected on 12's 45c packs on this XPS Pro fan.

Are the numbers posted on your site numbers with 65C packs only?
Last edited by FlyBoyTha1; Apr 03, 2011 at 06:56 AM.
Apr 03, 2011, 04:05 PM
Xtreme Power Systems
That's all personal preference.

Performance varies dramatically with different batteries. Our numbers are using our 65C batteries.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion 2801 Pro settings for V120D02 gmbnj Micro Helis 14 Dec 20, 2011 08:19 AM
Discussion Vertigo "Rebel" mods for XPS Dynamax fan install bruff Electric Ducted Fan Jet Talk 6 Mar 13, 2011 11:11 PM
Discussion 16S ESC for XPS DYNAMAX EXTREME PRO Brutikus Electric Ducted Fan Jet Talk 33 Feb 10, 2011 05:13 PM
Help! 100mm Sapac Fan ESC Settings??? Kevin Greene Electric Ducted Fan Jet Talk 8 Dec 02, 2010 04:27 PM