Thread Tools
Jul 25, 2011, 01:47 PM
RIP Azarr - "Old age is not for sissies"
Azarr's Avatar
Quote:
Originally Posted by AlanFlorida
Been a little while since I changed my settings but what I recall is:
Place your mouse over the number you want to change. Hold mouse button down and move mouse left or right and they will change. It is a little strange. Good luck.
Thanks, I was trying to highlight it and then change the numbers. I'll try that if I feel I need to change them.

Azarr
Sign up now
to remove ads between posts
Jul 25, 2011, 01:56 PM
Registered User
jpsabo's Avatar
If you do make changes, read the board again afterwards to check the actual value. Sometimes it can be a digit off from what is displayed.

Quote:
Originally Posted by Azarr
Thanks, I was trying to highlight it and then change the numbers. I'll try that if I feel I need to change them.

Azarr
Jul 25, 2011, 04:51 PM
RIP Azarr - "Old age is not for sissies"
Azarr's Avatar
Well, I've got a problem. Doing a final check in the living room and one of the motors or ESCs went up in smoke. Not sure what happened, the copter never left the ground. Really stunk up the house.

Azarr
Jul 25, 2011, 05:02 PM
Registered User
Eury's Avatar
Had the same thing happen on mine on Friday, except mine made it in the air for 15sec or so. On mine, the motor is where the short happened, but it damaged the ESC as well.Witespy took care of me and I got a ship notice today for a new motor (I didn't realize the ESC was also dead when I contacted him.)

I got mine flying on a similar motor and Esc on the one arm that my LHS had in stock, but I'm looking forward to installing the correct equipment when it gets here.
Jul 25, 2011, 05:15 PM
Registered User
BayAreaCrasher's Avatar
quick question, if I download the dev version of MultiWii, is it safe to use the default settings on our quads? I ask because I've seen some people having better success with the dev version at making their quads more stable in FFF
Jul 25, 2011, 05:23 PM
Registered User
Quote:
Originally Posted by Azarr
That I understand, but for some reason I can't figure out how to actually make a change.

Thanks,

Azarr
left click and hold on the value you want to change then slide mouse to left or right. Release mouse to set the value.
Jul 25, 2011, 06:19 PM
Registered User
Asarr. Pm sent......

I am so Sorry for this. I will Fix it up correct and make sure this gets solved. You got full support. Do not worry!
Jul 25, 2011, 08:13 PM
Waiting for my Medication
seadog1967's Avatar
Quote:
Originally Posted by WanderLustMan
quick question, if I download the dev version of MultiWii, is it safe to use the default settings on our quads? I ask because I've seen some people having better success with the dev version at making their quads more stable in FFF
Your smarter to use the default settings first then work from there. Each quad acts differently. What works on mine doesn't mean it will work on yours. Make sure you copy or print a screen shot of your original settings though just in case.
Jul 25, 2011, 08:31 PM
Registered User
AlanFlorida's Avatar
Azarr....sorry to hear of your problem. You are in good hands with WiteSpy!! He will make it right!
Jul 25, 2011, 09:49 PM
LOAD "FLIP-FPV",8,1
vic20owner's Avatar
Paul will definitely always work to keep his customers happy
Jul 25, 2011, 09:57 PM
Registered User
We had 4 witespy quads up at the same time...

Two of these guys never flown before and were doing a great job.

going to try to edit some of all the footage together, here is some raw

FILE0028 (1 min 24 sec)
Jul 25, 2011, 11:00 PM
Registered User
quad magic trick @2:00 into the video ... well almost

four witespys quads Sarasota Silent flyer (2 min 47 sec)
Jul 26, 2011, 01:43 AM
Registered User
RocketJoe's Avatar
hey witespy..

can I replace the 2.4 reciever and go 72..??

see post 1593

tkx
Jul 26, 2011, 04:26 AM
RIP Azarr - "Old age is not for sissies"
Azarr's Avatar
Quote:
Originally Posted by witespy
Asarr. Pm sent......

I am so Sorry for this. I will Fix it up correct and make sure this gets solved. You got full support. Do not worry!

Thanks Paul,

Things happen, not a problem. Your great customer service that everyone mentions is the reason I decided to buy from you.

Azarr
Jul 26, 2011, 01:09 PM
Registered User
Quote:
Originally Posted by Azarr
Thanks Paul,

Things happen, not a problem. Your great customer service that everyone mentions is the reason I decided to buy from you.

Azarr
thank you for understanding.

I will get you fixed up and flying.
Last edited by witespy; Jul 26, 2011 at 04:17 PM.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Quad brushless motors and quad ESC wiring whatala Power Systems 11 Dec 28, 2015 03:51 PM
Found Want to Trade FY-90Q Quad Controller for differnt Quad controller FL62 Aircraft - Electric - Helis (FS/W) 5 Mar 11, 2011 06:43 PM
Discussion KK Quad In air from a Gaui Quad guyg Multirotor Drone Talk 1 Jan 21, 2011 05:13 PM
Build Log STM8s Quad-copter "Quad-radic" Edftakeoff Multirotor Drone Talk 4 May 17, 2010 03:09 AM
quad cdr quad esc how many poly cells? captinnitro Power Systems 2 Apr 04, 2005 08:37 PM