Thread Tools
Old May 16, 2011, 09:54 AM
jtprouty is offline
Find More Posts by jtprouty
Inherent Tinkerer
Still considering it but it may not be required. I was looking at a shoulder wing version to let us access the inside of the fuselage through the wing saddle which would also free up a lot of room in the fuselage. With the removable wings (two piece) the only structure inside the fuselage will be wing spars running between the wings like I have on the Osprey. That leaves a whole lot of space for payload and batteries etc.

Jimmy
Sign up now
to remove ads between posts
Old May 16, 2011, 10:03 AM
chancesAU is offline
Find More Posts by chancesAU
Registered User
chancesAU's Avatar
Cant wait Jimmy... I have plans for the Foamaroo already!
Can you divulge any more information on your pan/tilt system?
Will it fit a block camera?
Old May 16, 2011, 10:43 AM
jtprouty is offline
Find More Posts by jtprouty
Inherent Tinkerer
Hi Chance,

The pan system at this point is too small for the camera that you referred to and is more suited to the mini FPV cameras. As time permits I'm going to develop a full pan/tilt system that will interchange with the nose dome on the Foamaroo.

Jimmy
Old May 16, 2011, 12:12 PM
chancesAU is offline
Find More Posts by chancesAU
Registered User
chancesAU's Avatar
Thanks Jimmy, the nose dome idea is just what I was thinking
Ive seen some nice gimble cameras (worth more than my car) which slot onto a tube fuse, I hope to replicate it for the Jackaroo... just need to get my filthy hands on one
Old May 16, 2011, 12:22 PM
jtprouty is offline
Find More Posts by jtprouty
Inherent Tinkerer
Thanks, Chance.

I know there are a bunch of people wanting the Foamaroo right away but I don't want to release it until I'm happy with it. I should have a firm release date this weekend after I test fly the removable wings. We're having our annual bout with high winds here in Kansas (no trees to stop the wind!) and I'm hoping they'll drop below 20 knots this weekend.

Jimmy
Old May 16, 2011, 10:39 PM
scrtsqrl is offline
Find More Posts by scrtsqrl
Just trying to get a nut.
scrtsqrl's Avatar
Thanks Jimmy.
Is the mount "open" or will it have a ball or streamlined fairing?
Old May 16, 2011, 11:36 PM
jtprouty is offline
Find More Posts by jtprouty
Inherent Tinkerer
Hi Chance,

Which mount? For the pan system?

Jimmy
Old May 16, 2011, 11:41 PM
chancesAU is offline
Find More Posts by chancesAU
Registered User
chancesAU's Avatar
I didnt wanna know, it was scrtsqrl ... and its Chances!! :P
Old May 16, 2011, 11:50 PM
jtprouty is offline
Find More Posts by jtprouty
Inherent Tinkerer
Oops! See what haPpens when I'm awake too long!
Old May 17, 2011, 01:04 AM
chancesAU is offline
Find More Posts by chancesAU
Registered User
chancesAU's Avatar
Hehe, I know that feeling!
Id rather wait an extra few weeks for a better product - so take your time
Old May 17, 2011, 02:30 AM
LokeyFPV is offline
Find More Posts by LokeyFPV
FPV = Fun Powered Vehicle
LokeyFPV's Avatar
Subscribed


Jimmy, Great work by you and your team. I was getting ready to purchase a flying wing. Looks like I now need to wait for yours.

Will the pan/tilt system your designing for this airframe be stabilized? Or have the option to add a gyro or stabilizing system later? Do you think it's even needed? The wing looks pretty darn stable.

Looks like there are thunderstorms and wind in the forecast for this week. Hopefully you'll find a break in the weather to do more testing. Should clear by Saturday, that might be the day.

Keep up the good work!

Cheers
Old May 17, 2011, 03:50 AM
imdone is offline
Find More Posts by imdone
Registered User
imdone's Avatar
I was about to buy a rightwing zypher but Im going to wait on this one! when is going to be for sale? a little off topic but how much is your ion pan and tilt?
Last edited by imdone; May 17, 2011 at 03:56 AM.
Old May 17, 2011, 09:39 AM
scrtsqrl is offline
Find More Posts by scrtsqrl
Just trying to get a nut.
scrtsqrl's Avatar
Quote:
Originally Posted by jtprouty View Post
Hi Chance,

Which mount? For the pan system?

Jimmy
yes. camera pan and tilt...
Old May 17, 2011, 10:13 AM
jtprouty is offline
Find More Posts by jtprouty
Inherent Tinkerer
The pan system will simply plug into the existing nose cone as an assembly that can be removed for access. It can be rotated 90 degrees during installation to be used as a tilt mechanism and the camera will fit through a slot in the fiberglass dome. Of course it will be able to be used behind the clear dome as well.

I'll be making a full pan/tilt mechanism that will replace the nose section in the near future but that's on the back burner until the Foamaroo design is complete and I've filled existing orders.

Jimmy
Old May 17, 2011, 10:15 AM
jtprouty is offline
Find More Posts by jtprouty
Inherent Tinkerer
Imdone,

If all goes well this week I should be ready to start taking orders in two weeks. The only delay I can foresee would be a delay in receiving parts ordered for the kits from my suppliers.

Jimmy

Quote:
Originally Posted by imdone View Post
I was about to buy a rightwing zypher but Im going to wait on this one! when is going to be for sale? a little off topic but how much is your ion pan and tilt?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Nayan-uav for india- a 15 kg uav devlopment for search survillance and resuce pritam_ashutos UAV - Unmanned Aerial Vehicles 90 Mar 09, 2011 09:51 AM
Discussion New version of Momentum 40A to 150A Brushless ESC coming back in stock! hobbypartz HobbyPartz.com 10 Aug 18, 2010 06:19 PM
Build Log New Project: Quadcopter - first hover, then OSD, FPV, UAV... the works... MARTINELLI Coaxial Helicopters 5 Aug 02, 2009 02:48 PM
Discussion Recommendations for a EZ*(or other) FPV/UAV design for Public Safety/LEO usage gwenhastings FPV Talk 11 Feb 14, 2008 12:34 PM
Discussion New FPV Extra 300 coming... zaguruinzasky FPV Talk 46 Dec 14, 2007 07:09 PM