New Products Flash Sale
Thread Tools
Old Mar 13, 2011, 04:48 PM
Charlescd is offline
Find More Posts by Charlescd
RC Paraglider / Sailplanes
Charlescd's Avatar
Question

Suggestions for esc that can handle 10s lipo.


I'm looking for a low costing but still good quality esc that can handle 10s lipo.

Any suggestions welcome.
thanks
Sign up now
to remove ads between posts
Old Mar 13, 2011, 06:08 PM
rick.benjamin is offline
Find More Posts by rick.benjamin
Reduce the drama...
rick.benjamin's Avatar
Castle Phoenix handles up to 12s
http://www.castlecreations.com/produ...ducts_fly.html
Old Mar 13, 2011, 07:06 PM
Charlescd is offline
Find More Posts by Charlescd
RC Paraglider / Sailplanes
Charlescd's Avatar
I checked out their website and the only Castle Pheonix that handles over 8s is the pheonix HV. they are all over 200$. Out of my reach.

I was looking more at around 100-130$ price range.

Has anyone tried this: great planes silver series
http://www3.towerhobbies.com/cgi-bin...?&I=LXRDH4&P=7
Old Mar 13, 2011, 07:29 PM
four stroke pwr is offline
Find More Posts by four stroke pwr
Sky Pilot
four stroke pwr's Avatar
CharlesCD, you are confused. Better look again.. Castle Creations is superior for $15 MORE...
Old Mar 13, 2011, 08:06 PM
Charlescd is offline
Find More Posts by Charlescd
RC Paraglider / Sailplanes
Charlescd's Avatar
http://www.castlecreations.com/produ...oenix_ice.html

None of them handle over 6s. The castle models that do, are all over 200$.

If you can find me a Castle pheonix Ice Hv for 115$ - post the link.
Old Mar 13, 2011, 08:44 PM
Charlescd is offline
Find More Posts by Charlescd
RC Paraglider / Sailplanes
Charlescd's Avatar
The esc would need to be min: 80amp
Old Mar 13, 2011, 08:47 PM
Chuck is offline
Find More Posts by Chuck
Balsa to the Wall
Chuck's Avatar
Castle Creations Phoenix ICE HV 60A 50V - $112.99 at Todd's Models.

Phoenix-85 High Voltage Brushless ESC - $158.99
Old Mar 13, 2011, 08:51 PM
Chuck is offline
Find More Posts by Chuck
Balsa to the Wall
Chuck's Avatar
Don't forget another $25 or so for a BEC.
Old Mar 13, 2011, 09:50 PM
Xpress.. is online now
Find More Posts by Xpress..
Team Hitec, Customer Support
Xpress..'s Avatar
Buy a Castle and be done with it. With this much voltage/current, why on earth would you risk using a cheaper chinese ESC?
Old Mar 14, 2011, 06:17 AM
Charlescd is offline
Find More Posts by Charlescd
RC Paraglider / Sailplanes
Charlescd's Avatar
I have a green models tiger moth. The weight of the plane once finished should be about 11-12 lbs. My current setup on 6s is pushing 850 watts at full throttle. I'm not sure that will be enough so that's why i'm looking at other options. I looked at other threads and most guys where running 8s or 10s for a similar plane.

Guess i'll have to save up.
Old Mar 14, 2011, 08:44 AM
flypaper 2 is online now
Find More Posts by flypaper 2
Registered User
flypaper 2's Avatar
I use this one with many flights in a few planes with no problems on two 5000ma 5 cell Rhino packs in series.
http://www.hobbyking.com/hobbyking/s...idProduct=4691
This is the current plane I'm using it in. With the cowl off you can see the batts hung under the motor.

Gord.
Last edited by flypaper 2; Mar 14, 2011 at 08:49 AM.
Old Mar 14, 2011, 08:46 AM
CyberJay is offline
Find More Posts by CyberJay
Rsetiegerd Uesr
CyberJay's Avatar
http://www.hobbyking.com/hobbyking/s...idproduct=4691

I run one of these on my 17.25lb Monocoupe. Right around 2000 watts which is only about 50 amps.

I bought it in July of '09. It's only got about 10hrs of flight time on it though. The 1/4 scale plane is a lot of work to take to the field.

It SAYS it will do 12s and 110a but people do burn them up running them that hard. But if all you're looking for is 1200-1500 watts I am positive this one will work fine.

-Jay

EDIT: haha.. too late.
Old Mar 14, 2011, 09:00 AM
flypaper 2 is online now
Find More Posts by flypaper 2
Registered User
flypaper 2's Avatar
This is a 3000 watt motor Jay. But as you say, I seldom run it at full throttle. Built it back about 12 yrs ago with a Quadra 42 in it. Cap 10B by Yellow Aircraft.

Gord.
Old Mar 14, 2011, 11:25 AM
Mike_Then is offline
Find More Posts by Mike_Then
I hate waiting for parts
Mike_Then's Avatar
Quote:
Originally Posted by Xpress.. View Post
Buy a Castle and be done with it. With this much voltage/current, why on earth would you risk using a cheaper chinese ESC?
What he said. I replaced a Jeti 90A ESC with a Castle HV 110 (not an ICE) and it's been perfect so far.
RCG Plus Member
Old Mar 14, 2011, 01:12 PM
Charlescd is offline
Find More Posts by Charlescd
RC Paraglider / Sailplanes
Charlescd's Avatar
I was also interested on the hobbywing esc

http://www.helibuy.com/hobbywing-bru...ahv-p-263.html

anyone have experience with this esc?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Seeking An Airplane That Can Handle Some Wind Tepid Pilot Electric Plane Talk 22 Apr 27, 2011 09:33 PM
Wanted Need a 10s capable speed control that can handle over 100amps sherlockshah Aircraft - Electric - Power Systems (FS/W) 9 Dec 28, 2010 10:57 PM
Discussion Can my Art-Tech SU-27 stock ESC handle 4s? TL697 Foamy EDFs 4 Sep 01, 2010 08:03 PM
Found 4S lipo that can handle 150 amps burst flying evader Aircraft - Electric - Batteries & Chargers (FS/W) 1 May 27, 2008 08:13 PM
Micro ESC that can handle 10 cells??? Jim McPherson Electric Plane Talk 8 May 03, 2001 01:10 AM