First attempt to build coaxial flying machine - RC Groups
Thread Tools
Mar 12, 2011, 02:55 AM
Registered User

First attempt to build coaxial flying machine

Dear all
This is my first attempt to build coaxial flying machine. My knowledge is very modes and I will appreciate your expert opinions.
Please see attached sketch. Need help with choosing the right parts and critiquing the concept.
No limit on budget
Size is 15 inches in diameter.
Sign up now
to remove ads between posts
Mar 12, 2011, 03:07 AM
Master Of My Universe
scotsoft's Avatar
You might find what you are looking for over in this thread as I think you are heading towards a tricopter or a quad.

No use designing the wheel when someone has already done it .

You will find many different machines in this thread and after you have done some reading and watched a few videos you will end up with a multitude of ideas.
Mar 12, 2011, 03:59 AM
Registered User
Dear Scotsoft, thanks for your prompt reply and the link you provided.
I have seen those tricopter /quad, yet still I would truly appreciate it if I can get help with current 2 opposite motors on an axial rotating bar.
Thanks again.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Yippee! "DARE" Scale 1903 "Wright Flyer" Build First attempt Here We Go !!!! freddy warbird Parkflyers 45 Feb 22, 2015 11:18 AM
Build Log my first attempt at 1/72 scale planes (build log with video) Heliman420 Scratchbuilt Indoor and Micro Models 1257 Jul 14, 2011 02:26 AM
Build Log F-35 build attempt newbieflyer VTOLs 2 Sep 29, 2010 08:49 AM
Discussion 5.5 inch wingspan full fuse plane my first attempt/build log 3dFlyer88 Scratchbuilt Indoor and Micro Models 1 Sep 08, 2007 04:21 PM