Thread Tools
Feb 20, 2012, 12:45 AM
Registered User
It's the same size as the impeller shaft which I think is 2mm.


Sign up now
to remove ads between posts
Feb 20, 2012, 09:05 AM
Platinum Card Member
sundogz's Avatar
The Tear Into has a 2.3mm shaft.
Feb 20, 2012, 09:15 AM
Registered User
Thanks for the correction, I was going by eye & a steel ruler!!

I couldn't remember the diameter.
Feb 21, 2012, 09:36 AM
Registered User
interplanet's Avatar
anybody see these at BAnggood rc? They are supposedly $14.08 with free shipping. Never dealt with them before and dont know how big this boat actually is, but I know a bunch of people run them.

http://www.banggood.com/Wholesale-1-...t-p-39559.html
Feb 21, 2012, 10:49 AM
Dongskie
Dongskie's Avatar
Thanks Mozzy :-)
Feb 21, 2012, 01:52 PM
Registered User
pitts's Avatar
Quote:
Originally Posted by interplanet View Post
anybody see these at BAnggood rc? They are supposedly $14.08 with free shipping. Never dealt with them before and dont know how big this boat actually is, but I know a bunch of people run them.

http://www.banggood.com/Wholesale-1-...t-p-39559.html
I just bought two; $27.04Aus Shipped !!!!
Lets see what happens. If no boats arrive within 45 days, at least I can make a Paypal claim...
Feb 21, 2012, 05:26 PM
NaN
Andy2No's Avatar
Interesting definition of 3CH there.

Also, it says

Quote:
Features:
Function:Stop, up, turn left, turn right.
How does "up" work? I don't think mine has that feature
Feb 22, 2012, 09:17 PM
Dongskie
Dongskie's Avatar
Quote:
Originally Posted by sundogz View Post
The Tear Into has a 2.3mm shaft.
Thanks mate!

Anyone knows where I can order/buy a new aluminum coupler? I wrecked the threads on mine :-(
Feb 23, 2012, 05:54 AM
Registered User
maybe it's a bad translation of jump haha i got mine this week and i can't believe i paid nearly 70 from the uk, i could have bought 2 for that DOH!!!! haha.

we use an alloy engineer for work and i am getting him to make a coupler so i can run my velineon system from my slash 4x4, i'll keep you posted on how it turns out
Feb 23, 2012, 07:01 AM
Registered User
wparsons's Avatar
It's showing as $28.59 for me?
Feb 23, 2012, 10:24 AM
Registered User
hotrodder's Avatar
I am getting a tear into and would like to know if the motor will work?
http://www.hobbyking.com/hobbyking/s...00kv_300w.html
Joe
Feb 23, 2012, 12:22 PM
Registered User
Quote:
Originally Posted by hotrodder View Post
I am getting a tear into and would like to know if the motor will work?
http://www.hobbyking.com/hobbyking/s...00kv_300w.html
Joe
Yes, that should be good for 3S. Put up some pics when you get it all put together!
Feb 23, 2012, 01:36 PM
Registered User
hotrodder's Avatar
Firehawk I will get mine tomorrow. I already have the esc,motor and servo. Have you done the mod to the jet where you put the grass tube in and the bearing? If so do you have any pictures of it. And with the jet can you put in the bigger 28mm impeler.
Joe
Feb 23, 2012, 03:00 PM
Registered User
pitts's Avatar
Quote:
Originally Posted by wparsons View Post
It's showing as $28.59 for me?
A few hours after I bought 2 for $14.08each, I looked again and the price had jumped to $28.59! Still cheap though; The cheapest here in Aus is $55each shipped at the moment.
I emailed them yesterday asking for an update of my order because I had not recieved any confirmation; No reply yet.

Did anyone else order from them??
Feb 23, 2012, 03:08 PM
Registered User
pitts's Avatar
Quote:
Originally Posted by hotrodder View Post
I am getting a tear into and would like to know if the motor will work?
http://www.hobbyking.com/hobbyking/s...00kv_300w.html
Joe
I have a Turnigy 450 H2218 3550KV Brushless outrunner in mine, with a BP22-MMWC "Water Cooling Motor Mount 30mm" (Also from Hobbyking). Cheaper than the ADS300 but has plenty of power. Powered by Turnigy 2200mAh 3S 40C Lipo Packs, the little boat rocks!!!! I'm very happy with the performance.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log My NQD "Tear Into" build thread. wparsons Racing Boats - Electric 69 Feb 17, 2016 08:47 PM
Wanted Anyone have a NQD Tear into jet boat kicking around? Energy Boats (FS/W) 3 Mar 22, 2011 07:41 PM
Discussion Brushless NQD torn into jet boat mortonj69 Micro and Sub-Micro Boats 3 Feb 14, 2011 07:02 AM
Discussion Brushless NQD torn into jet boat mortonj69 Racing Boats - Electric 3 Oct 16, 2010 06:40 PM
New Product NQD Tear Into Jet Boats rcnz Dock Talk 1 Jul 14, 2010 06:48 PM