Blade MCP X - owner's thread - Page 455 - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Dec 09, 2011, 08:07 PM
Vienna calling...
Donaldsneffe's Avatar
Quote:
Originally Posted by Stugoose
has anyone used the xtreme carbon blades,
http://www.helifreak.com/showthread.php?t=341398

Walter
Sign up now
to remove ads between posts
Old Dec 09, 2011, 08:39 PM
mmcrry
A moderator felt this post violated the following rule: Cross-posting.
Dec 09, 2011, 09:05 PM
Registered User
Quote:
Originally Posted by kokopelli
Buy a Microheli aluminum swashplate and be done with it forever.
You're talking about this one?

http://www.microheli.com/store/produ...roducts_id/376

It looks pretty sweet. Does the extra weight make much difference?


So, is that a negative on repairing the stock swash? That little cross piece looks like it should cost about 35 cents... but I haven't actually tried to disassemble the swash yet to see if it's possible.
Dec 09, 2011, 09:47 PM
.................
Dylwad's Avatar
Quote:
Originally Posted by random13
You're talking about this one?

http://www.microheli.com/store/produ...roducts_id/376

It looks pretty sweet. Does the extra weight make much difference?

You wont notice an extra .15 grams
Dec 09, 2011, 11:49 PM
Rotary~myPast,Present &Future!
Quote:
Originally Posted by perschek
gr8!

Theres 100 different reasons it will do that at mid stick ish from coming from negative or positive pitch. Most common would be your blades out of weight. Second would be main shaft / main gear loose / broken, third would be slop in the swash (ball grommet fix) fourth would be play in the blade grips (also grommet the blade grips if there is slop) Basically any ball needs a grommet except for the inner swash balls (I tried once, didn't help haha)
I can't believe it! The 2 grommets I added to the plastic swash 'killed' the death wobble that I was getting with the KDBBs. I didn't expect it would make such a big difference, when the grommets stopped the servos' linkages from twisting.
Dec 10, 2011, 12:11 AM
PSALM 14:1
Sammy70's Avatar

Mcpx sale!


Anyone in the market for a new BNF MCP X ??


http://www.ultimatehobbies.com/store...LADE+MCP+X+BNF


Add it to your cart and check the price
Dec 10, 2011, 07:07 AM
Registered User
timox72's Avatar
Quote:
Originally Posted by Sammy70
Anyone in the market for a new BNF MCP X ??


http://www.ultimatehobbies.com/store...LADE+MCP+X+BNF


Add it to your cart and check the price
Amazing price! Will be seriously thinking about it, thanks
Dec 10, 2011, 07:39 AM
GEEBEE Can't WAIT!
perschek's Avatar
Just wanted to update all of you on the v2 mcpx. I love it. I don't have any drifting and the tail holds good. I still have stock everything. I'm using kbdd tail rotor is the only thing I've done to the tail. But I'm not flying 3d with the mcpx any more. Costing me too much money in parts lol. Really enjoying it. Haven't flown my brushless mcpx in about 1.5 weeks. Def worth the 55 bucks to get the v2 board IMO, if you are brushed anyways. OR if your brushless and don't like the drift issues
Dec 10, 2011, 07:55 AM
Registered User
Stugoose's Avatar
i liked the kbdd tail rotor but i had removed mine after 3 tail shafts bent from it not flexing
Dec 10, 2011, 08:41 AM
I'd rather be flying!
turboparker's Avatar
Quote:
Originally Posted by kokopelli
The batteries are not available at your link. Read your post. You claimed All-e-RC had them. They do not.

So, yes...again...FAIL.
As I said - they were in stock when I checked. Also as I said - you can do your own research. I went to the trouble of providing you the part number, and all you do is complain that they weren't in stock when you went there. That's being ungrateful. You have Google. Don't act so helpless. Find your own source!

Joel
Dec 10, 2011, 09:57 AM
Suspended Account
Quote:
Originally Posted by turboparker
As I said - they were in stock when I checked. Also as I said - you can do your own research. I went to the trouble of providing you the part number, and all you do is complain that they weren't in stock when you went there. That's being ungrateful. You have Google. Don't act so helpless. Find your own source!

Joel
Settle down...you'll live longer... No need to get all upset over your useless two second Google search and quit acting like it was some significant effort on your part. I did my own searches and wasn't able to find them IN STOCK (operative term for you), so I asked. But, thanks anyway for *trying* to help...
Last edited by kokopelli; Dec 10, 2011 at 10:03 AM.
Dec 10, 2011, 10:13 AM
Registered User
Stugoose's Avatar
Hey guys, i just did some flying on the 250 and 450 this morning,both flip and fly great, the 250 is definetly more aggressive than my v2 se
Dec 10, 2011, 10:51 AM
Suspended Account
Quote:
Originally Posted by Stugoose
Hey guys, i just did some flying on the 250 and 450 this morning,both flip and fly great, the 250 is definetly more aggressive than my v2 se
Nice. What 250 do you have? I really like that size and I have a spare Quark that needs to go on something...
Dec 10, 2011, 10:57 AM
Registered User
Torch8's Avatar
Quote:
Originally Posted by perschek
Just wanted to update all of you on the v2 mcpx. I love it. I don't have any drifting and the tail holds good. I still have stock everything. I'm using kbdd tail rotor is the only thing I've done to the tail. But I'm not flying 3d with the mcpx any more. Costing me too much money in parts lol. Really enjoying it. Haven't flown my brushless mcpx in about 1.5 weeks. Def worth the 55 bucks to get the v2 board IMO, if you are brushed anyways. OR if your brushless and don't like the drift issues
Can you max out the collective pitch now with V2 and no tail blow out? Is really big improvement and better flying with v2?

I don't fly 3-D yet but is interested in geting brush V2 to learn/practice inverts, flips and rolls. Had v1 but sold it.
Dec 10, 2011, 11:13 AM
Registered User
timox72's Avatar
Quote:
Originally Posted by perschek
Just wanted to update all of you on the v2 mcpx. I love it. I don't have any drifting and the tail holds good. I still have stock everything. I'm using kbdd tail rotor is the only thing I've done to the tail. But I'm not flying 3d with the mcpx any more. Costing me too much money in parts lol. Really enjoying it. Haven't flown my brushless mcpx in about 1.5 weeks. Def worth the 55 bucks to get the v2 board IMO, if you are brushed anyways. OR if your brushless and don't like the drift issues
Nice to hear Where did you see a V2 board for $55?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Blade mCP X BNF Heli... ChuckTseeker Micro Helis 15708 Jan 23, 2017 02:22 PM
Discussion Blade mCP X Discuss anything thread A Rdnek Micro Helis 457 Jul 27, 2011 12:34 AM
Discussion The New BLADE mCP X Has Arrived... ChuckTseeker Electric Heli Talk 38 Mar 27, 2011 08:35 PM
Discussion new blade mcp X anyone know anything new. epoweredrc Atlanta Area RC 6 Mar 16, 2011 09:14 PM
Discussion Blade mCP x - strictly on topic Q and A thread jdog83 Micro Helis 58 Feb 07, 2011 03:28 PM