New Products Flash Sale
Thread Tools
Old Aug 07, 2003, 11:13 PM
thor4944 is offline
Find More Posts by thor4944
Registered User
thor4944's Avatar

Question about A-10 with polies?

I have 3s1p 1200 etec.....would these be ok with the A-10....I just saw that video of the A-10 GWS with 2s2p 1200......would the 3s1p 1200 be ok to...
1. Would it be more or less power
2. HOw much flight time..
thanks guys!!!
Sign up now
to remove ads between posts
Old Aug 07, 2003, 11:51 PM
Guyffon is offline
Find More Posts by Guyffon
Registered User
I think the 3s pack will fry the stock motor, I test 1 stock fan and it drew 8 amps , I think that will fry t eh motor in seconds, but I only powered it up for less than 3 secs. Go with the 2s2p KK340 pack, it will have the amps to cover and is lighter than teh 2s2p 1200 way, though flight times will be cut short but those small stock motors wun be able to fly more than 7 mins on the stock at WOT as they will begin to over heat.
Old Aug 08, 2003, 12:26 AM
Mikey-flies is offline
Find More Posts by Mikey-flies
Registered User
If you replace the motors with 7.2v ips motors you'll be ok. If not you wil fry the motors quickly. 2s2p etecs give 3 -4 7-8 minute flights
Old Aug 08, 2003, 01:07 AM
citabria is offline
Find More Posts by citabria
Under tension
citabria's Avatar

Have you tried replacing thr 4.8V motors with 7.2V? I've often wondered if this would work with a 3s1p or a 9 cell batter pack. Would the 7.2V motors last any longer?

Old Aug 08, 2003, 01:12 AM
Guyffon is offline
Find More Posts by Guyffon
Registered User
for those whom have changed out the 4.8V to 7.2V pls let us know the amp draws and static thrust you get form the 3s lipos, thanks, I would love to know the values and the power of those motors

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question Question about a Transmitter with a new Airplane Col Sanders v2 Electric Plane Talk 6 Apr 25, 2007 02:05 AM
Question about amps with same volts. mohillbilly Batteries and Chargers 4 Aug 06, 2005 01:58 PM
Question about Flaps with Optic 6. STaNgXs Hitec/Multiplex USA 1 Jan 09, 2005 02:48 AM
Question about glassing with WBPU... please help. NetForce2K Foamies (Kits) 3 Jul 25, 2002 11:20 AM
Answer to the question about Cell towers interfearing with RX. kushal_22 Foamies (Kits) 0 Apr 21, 2002 03:01 PM