JR 9303 2.4 radio setup for 6 servo and motor - RC Groups
Thread Tools
Mar 07, 2011, 05:09 PM
Registered User

JR 9303 2.4 radio setup for 6 servo and motor

I want to set up my Cularis electric sailplane and a Windsong sailplane with my 9 channel JR radio. I am looking for a templete or instructions on setting up the radio. I would like to have throttle control on right slider or and flap movement on left spoiler/throttle lever. I found Sherman Knights article but it is not for the JR radio 9303 2.4 version I was told by Horizon hobby.
I have checked the internet but not found what I am looking for yet.
Sign up now
to remove ads between posts
Mar 07, 2011, 05:22 PM
Registered User
Having owned both, the instructions for the XP9303 is applicable to the X9303. The early XP9303 didn't have a spoiler stick inhibit that can be found in some of the GLID mixes of the later XP9303 and X9303. But Knight's instruction didn't include it and you may not have any need for it. This inhibit is something that can be used if you want you want something to happen when the spoiler stick is at a certain position. But for the first setup, you can get by without it.

If you set your plane up using the instructions on page 7, you should get every thing you want. Write back if you run into a snag.

Last edited by AWorrest; Mar 07, 2011 at 05:47 PM.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Wanted radio to Buddy box with JR 9303 2.4 ssallenbach Aircraft - General - Radio Equipment (FS/W) 4 Jun 23, 2016 09:32 AM
Sold JR 9303 72mhz Radio with 72 mhz and 2.4 Modules plus rcvrs. jrbike Aircraft - General - Radio Equipment (FS/W) 9 Dec 10, 2010 06:00 PM
Sold JR 9303 2.4 AIRPLANE radio ttoomm Aircraft - General - Radio Equipment (FS/W) 0 Nov 02, 2010 01:18 PM
Sold JR 9303 radio 72MHz synth and Spektrum 2.4 module lineofsight Aircraft - General - Radio Equipment (FS/W) 1 Oct 20, 2010 07:32 PM
Sold Jr 9303 2.4 REDUCED FOR QUICK SALE JRAllen Aircraft - General - Radio Equipment (FS/W) 5 Oct 04, 2010 04:32 PM