Thread Tools
Mar 06, 2011, 04:24 PM
Registered User
Thread OP

EDF/Motor for University Design Project

Hey guys, first time poster! Been lurking for a couple weeks but I am still a complete novice at this.

I'm in charge of the propulsion system for a university senior design project. It's going to consist of 2 engines and I need 14-18 lbs of total thrust (but some extra cushon is always better). My constraints are reliability, performance, and price in that order.

From what I've read, it seems that the Midi Fan Pro with a neumotor 14 or 15 series will fit my bill? I just wanted to know what you guys thought. A project in a previous year used Shuebeler DS-51's with Lehner 2250 motors.

Also I was curious how the battery math worked with 2 motors. I understand that the motors are rated for a certain number of cells and the mAh rating gives you the flight time. If you have two motors do you need double the cells or can you just hook the motors up to the batteries and achieve half the flight time?

Sign up now
to remove ads between posts
Oct 13, 2018, 11:42 AM
Registered User

My Chinese ECU burned up

Where can I purchase the ECU or ECM for my foam flyer
Oct 14, 2018, 04:51 AM
Do it Right, the first time!
CoolerByTheLake's Avatar
Get a hold of Gary at , he can help you out with the right stuff--

Quick Reply

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log My new project: Piper Jet EDF own design pajlotmato Foamy EDFs 7 Jan 02, 2011 06:14 PM
Help! Help Engine sizing for design project teejaylajirafa Electric Plane Talk 3 Nov 20, 2010 06:10 PM
Wanted Tiny or small EDF and motor needed for a stupid silly or used Cabledawg1 Aircraft - Electric - Jets (FS/W) 2 Oct 19, 2010 09:55 AM
Texas A&M Senior Design Project EDF FlyinAg Electric Ducted Fan Jet Talk 17 Oct 27, 2005 11:50 AM